ixgbe: Add support for E610 FW Admin Command Interface

Add low level support for Admin Command Interface (ACI). ACI is the
Firmware interface used by a driver to communicate with E610 adapter. Add
t

ixgbe: Add support for E610 FW Admin Command Interface

Add low level support for Admin Command Interface (ACI). ACI is the
Firmware interface used by a driver to communicate with E610 adapter. Add
the following ACI features:
- data structures, macros, register definitions
- commands handling
- events handling

Co-developed-by: Stefan Wegrzyn <[email protected]>
Signed-off-by: Stefan Wegrzyn <[email protected]>
Co-developed-by: Jedrzej Jagielski <[email protected]>
Signed-off-by: Jedrzej Jagielski <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Bharath R <[email protected]>
Signed-off-by: Piotr Kwapulinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>

show more ...

net: intel: Use *-y instead of *-objs in Makefile

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that

net: intel: Use *-y instead of *-objs in Makefile

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.

Reviewed-by: Aleksandr Loktionov <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

ixgbe/ixgbevf: fix XFRM_ALGO dependency

Based on the original work from Arnd Bergmann.

When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a
link error:

drivers/net/ethernet/intel/ixg

ixgbe/ixgbevf: fix XFRM_ALGO dependency

Based on the original work from Arnd Bergmann.

When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a
link error:

drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa':
ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname'

Simply selecting XFRM_ALGO from here causes circular dependencies, so
to fix it, we probably want this slightly more complex solution that is
similar to what other drivers with XFRM offload do:

A separate Kconfig symbol now controls whether we include the IPsec
offload code. To keep the old behavior, this is left as 'default y'. The
dependency in XFRM_OFFLOAD still causes a circular dependency but is
not actually needed because this symbol is not user visible, so removing
that dependency on top makes it all work.

CC: Arnd Bergmann <[email protected]>
CC: Shannon Nelson <[email protected]>
Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
Signed-off-by: Jeff Kirsher <[email protected]>
Tested-by: Andrew Bowers <[email protected]>

show more ...

ixgbe: add AF_XDP zero-copy Rx support

This patch adds zero-copy Rx support for AF_XDP sockets. Instead of
allocating buffers of type MEM_TYPE_PAGE_SHARED, the Rx frames are
allocated as MEM_TYPE_ZE

ixgbe: add AF_XDP zero-copy Rx support

This patch adds zero-copy Rx support for AF_XDP sockets. Instead of
allocating buffers of type MEM_TYPE_PAGE_SHARED, the Rx frames are
allocated as MEM_TYPE_ZERO_COPY when AF_XDP is enabled for a certain
queue.

All AF_XDP specific functions are added to a new file, ixgbe_xsk.c.

Note that when AF_XDP zero-copy is enabled, the XDP action XDP_PASS
will allocate a new buffer and copy the zero-copy frame prior passing
it to the kernel stack.

Signed-off-by: Björn Töpel <[email protected]>
Tested-by: William Tu <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

net: intel: Cleanup the copyright/license headers

After many years of having a ~30 line copyright and license header to our
source files, we are finally able to reduce that to one line with the
adve

net: intel: Cleanup the copyright/license headers

After many years of having a ~30 line copyright and license header to our
source files, we are finally able to reduce that to one line with the
advent of the SPDX identifier.

Also caught a few files missing the SPDX license identifier, so fixed
them up.

Signed-off-by: Jeff Kirsher <[email protected]>
Acked-by: Shannon Nelson <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

intel: add SPDX identifiers to all the Intel drivers

Add the SPDX identifiers to all the Intel wired LAN driver files, as
outlined in Documentation/process/license-rules.rst.

Signed-off-by: Jeff Ki

intel: add SPDX identifiers to all the Intel drivers

Add the SPDX identifiers to all the Intel wired LAN driver files, as
outlined in Documentation/process/license-rules.rst.

Signed-off-by: Jeff Kirsher <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ixgbe: add ipsec register access routines

Add a few routines to make access to the ipsec registers just a little
easier, and throw in the beginnings of an initialization.

Signed-off-by: Shannon Nel

ixgbe: add ipsec register access routines

Add a few routines to make access to the ipsec registers just a little
easier, and throw in the beginnings of an initialization.

Signed-off-by: Shannon Nelson <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ixgbe: Add X550 support function pointers

This patch extends the function pointer structure to include the new
X550 class MAC types. This creates a new file ixgbe_x550.c that contains
all of the new

ixgbe: Add X550 support function pointers

This patch extends the function pointer structure to include the new
X550 class MAC types. This creates a new file ixgbe_x550.c that contains
all of the new methods. Because of similarities to the X540 part in
some cases we just use it's methods where they can be used without any
modification. These exported functions are now defined in the new
ixgbe_x540.h file.

Signed-off-by: Don Skidmore <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ixgbe: update date to 2013

Signed-off-by: Don Skidmore <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

ixgbe: only compile ixgbe_debugfs.o when enabled

This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe
driver to only compile the file when the config is enabled. This means
we can remo

ixgbe: only compile ixgbe_debugfs.o when enabled

This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe
driver to only compile the file when the config is enabled. This means
we can remove the #ifdef inside the ixgbe_debugfs.c file.

Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ixgbe: only compile ixgbe_debugfs.o when enabled

This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe
driver to only compile the file when the config is enabled. This means
we can remo

ixgbe: only compile ixgbe_debugfs.o when enabled

This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe
driver to only compile the file when the config is enabled. This means
we can remove the #ifdef inside the ixgbe_debugfs.c file.

Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ptp: Enable clock drivers along with associated net/PHY drivers

Where a PTP clock driver is associated with a net or PHY driver, it
should be enabled automatically whenever that driver is enabled.
T

ptp: Enable clock drivers along with associated net/PHY drivers

Where a PTP clock driver is associated with a net or PHY driver, it
should be enabled automatically whenever that driver is enabled.
Therefore:

- Make PTP clock drivers select rather than depending on PTP_1588_CLOCK
- Remove separate boolean options for PTP clock drivers that are built
as part of net driver modules. (This also fixes cases where the PTP
subsystem is wrongly forced to be built-in.)
- Set 'default y' for PTP clock drivers that depend on specific net
drivers but are built separately

Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ixgbe: add debugfs support

This patch adds debugfs support to the ixgbe driver to give
users the ability to access kernel information and to
simulate kernel events.

The filesystem is set up in the

ixgbe: add debugfs support

This patch adds debugfs support to the ixgbe driver to give
users the ability to access kernel information and to
simulate kernel events.

The filesystem is set up in the following driver/PCI-instance
hierarchy:
<debugfs>
|-- ixgbe
|-- PCI instance
| |-- attribute files

Signed-off-by: Catherine Sullivan <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ixgbe: do not compile ixgbe_sysfs.c when CONFIG_IXGBE_HWMON is not set

ixgbe_sysfs.c is only needed when CONFIG_IXGBE_HWMON is configured in the
kernel.

Signed-off-by: Emil Tantilov <emil.s.tantilo

ixgbe: do not compile ixgbe_sysfs.c when CONFIG_IXGBE_HWMON is not set

ixgbe_sysfs.c is only needed when CONFIG_IXGBE_HWMON is configured in the
kernel.

Signed-off-by: Emil Tantilov <[email protected]>
Acked-by: Don Skidmore <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ixgbe: Hardware Timestamping + PTP Hardware Clock (PHC)

This patch enables hardware timestamping for use with PTP software by
extracting a ns counter from an arbitrary fixed point cycles counter.
Th

ixgbe: Hardware Timestamping + PTP Hardware Clock (PHC)

This patch enables hardware timestamping for use with PTP software by
extracting a ns counter from an arbitrary fixed point cycles counter.
The hardware generates SYSTIME registers using the DMA tick which
changes based on the current link speed. These SYSTIME registers are
converted to ns using the cyclecounter and timecounter structures
provided by the kernel. Using the SO_TIMESTAMPING api, software can
enable and access timestamps for PTP packets.

The SO_TIMESTAMPING API has space for 3 different kinds of timestamps,
SYS, RAW, and SOF. SYS hardware timestamps are hardware ns values that
are then scaled to the software clock. RAW hardware timestamps are the
direct raw value of the ns counter. SOF software timestamps are the
software timestamp calculated as close as possible to the software
transmit, but are not offloaded to the hardware. This patch only
supports the RAW hardware timestamps due to inefficiency of the SYS
design.

This patch also enables the PHC subsystem features for atomically
adjusting the cycle register, and adjusting the clock frequency in
parts per billion. This frequency adjustment works by slightly
adjusting the value added to the cycle registers each DMA tick. This
causes the hardware registers to overflow rapidly (approximately once
every 34 seconds, when at 10gig link). To solve this, the timecounter
structure is used, along with a timer set for every 25 seconds. This
allows for detecting register overflow and converting the cycle
counter registers into ns values needed for providing useful
timestamps to the network stack.

Only the basic required clock functions are supported at this time,
although the hardware supports some ancillary features and these could
easily be enabled in the future.

Note that use of this hardware timestamping requires modifying daemon
software to use the SO_TIMESTAMPING API for timestamps, and the
ptp_clock PHC framework for accessing the clock. The timestamps have
no relation to the system time at all, so software must use the posix
clock generated by the PHC framework instead.

Signed-off-by: Jacob E Keller <[email protected]>
Tested-by: Stephen Ko <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ixgbe: add hwmon interface to export thermal data

Some of our adapters have thermal data available, this patch exports
this data via hwmon sysfs interface.

Signed-off-by: Don Skidmore <donald.c.ski

ixgbe: add hwmon interface to export thermal data

Some of our adapters have thermal data available, this patch exports
this data via hwmon sysfs interface.

Signed-off-by: Don Skidmore <[email protected]>
Tested-by: Stephen Ko <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

ixgbe: fix namespace issues when FCoE/DCB is not enabled

Resolve namespace issues when FCoE or DCB is not enabled.
The issue is with certain configurations we end up with namespace
problems. A simpl

ixgbe: fix namespace issues when FCoE/DCB is not enabled

Resolve namespace issues when FCoE or DCB is not enabled.
The issue is with certain configurations we end up with namespace
problems. A simple example:

ixgbe_main.c
- defines func A()
- uses func A()

ixgbe_fcoe.c
- uses func A()

ixgbe.h
- has prototype for func A()

For default (FCoE included) all is good. But when it isn't the namespace
checker complains about how func A() could be static.

To resolve this, created a ixgbe_lib file to contain functions used
by DCB/FCoE and their helper functions so that they are always in
namespace whether or not DCB/FCoE is enabled.

Signed-off-by: Jeff Kirsher <[email protected]>
Tested-by: Phil Schmitt <[email protected]>

show more ...

ixgbe: update copyright to 2012

New year so bump the copyright date.

Signed-off-by: Don Skidmore <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: J

ixgbe: update copyright to 2012

New year so bump the copyright date.

Signed-off-by: Don Skidmore <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kir

intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <[email protected]>

show more ...