net: ethernet: arc: remove emac_arc driver

The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/

net: ethernet: arc: remove emac_arc driver

The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/rk3188 as place holder has also been replaced, so
remove emac_arc.c to clean up some code.

Signed-off-by: Johan Jonker <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: arc: select CRC32

Fix the following build/link error by adding a dependency on the CRC32
routines:

ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode':
emac_main.c

net: arc: select CRC32

Fix the following build/link error by adding a dependency on the CRC32
routines:

ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode':
emac_main.c:(.text+0xb11): undefined reference to `crc32_le'

The crc32_le() call comes through the ether_crc_le() call in
arc_emac_set_rx_mode().

[v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing,
but the error comes from emac_main.o, which is part of the arc_emac module,
which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is
different from emac_arc...]

Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering")
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Vegard Nossum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

of: net: move of_net under net/

Rob suggests to move of_net.c from under drivers/of/ somewhere
to the networking code.

Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Jakub Kicinski <kub

of: net: move of_net under net/

Rob suggests to move of_net.c from under drivers/of/ somewhere
to the networking code.

Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasi

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

net: Remove depends on HAS_DMA in case of platform dependency

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TE

net: Remove depends on HAS_DMA in case of platform dependency

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Acked-by: Robin Murphy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: arc_emac: add dependencies on associated arches and compile test

Add dependencies on the architectures that support these devices and
add compile test to ensure ongoing code build coverage.

Si

net: arc_emac: add dependencies on associated arches and compile test

Add dependencies on the architectures that support these devices and
add compile test to ensure ongoing code build coverage.

Signed-off-by: Peter Robinson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethernet: arc: Add support emac for RK3036

The RK3036's GRFs offset are different with RK3066/RK3188, and need to set
mac TX/RX clock before probe emac.

Signed-off-by: Xing Zheng <zhengxing@ro

net: ethernet: arc: Add support emac for RK3036

The RK3036's GRFs offset are different with RK3066/RK3188, and need to set
mac TX/RX clock before probe emac.

Signed-off-by: Xing Zheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

drivers/net: remove all references to obsolete Ethernet-HOWTO

This howto made sense in the 1990s when users had to manually configure
ISA cards with jumpers or vendor utilities, but with the impleme

drivers/net: remove all references to obsolete Ethernet-HOWTO

This howto made sense in the 1990s when users had to manually configure
ISA cards with jumpers or vendor utilities, but with the implementation
of PCI it became increasingly less and less relevant, to the point where
it has been well over a decade since I last updated it. And there is
no value in anyone else taking over updating it either.

However the references to it continue to spread as boiler plate text
from one Kconfig file into the next. We are not doing end users any
favours by pointing them at this old document, so lets kill it with
fire, once and for all, to hopefully stop any further spread.

No code is changed in this commit, just Kconfig help text.

Signed-off-by: Paul Gortmaker <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethernet: arc: ARC_EMAC and EMAC_ROCKCHIP should depend on HAS_DMA

If NO_DMA=y:

drivers/built-in.o: In function `arc_emac_tx_clean':
emac_main.c:(.text+0x2decde): undefined reference to `dm

ethernet: arc: ARC_EMAC and EMAC_ROCKCHIP should depend on HAS_DMA

If NO_DMA=y:

drivers/built-in.o: In function `arc_emac_tx_clean':
emac_main.c:(.text+0x2decde): undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `arc_emac_rx':
emac_main.c:(.text+0x2dee1c): undefined reference to `dma_unmap_single'
emac_main.c:(.text+0x2dee72): undefined reference to `dma_map_single'
emac_main.c:(.text+0x2dee7e): undefined reference to `dma_mapping_error'
drivers/built-in.o: In function `arc_emac_probe':
(.text+0x2df2ee): undefined reference to `dmam_alloc_coherent'
drivers/built-in.o: In function `arc_emac_open':
emac_main.c:(.text+0x2df6d8): undefined reference to `dma_map_single'
emac_main.c:(.text+0x2df6e4): undefined reference to `dma_mapping_error'
drivers/built-in.o: In function `arc_emac_tx':
emac_main.c:(.text+0x2df9e4): undefined reference to `dma_map_single'
emac_main.c:(.text+0x2df9f0): undefined reference to `dma_mapping_error'

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethernet: arc: Add support for Rockchip SoC layer device tree bindings

This patch defines a platform glue layer for Rockchip SoCs which
support arc-emac driver. It ensures that regulator for the rmi

ethernet: arc: Add support for Rockchip SoC layer device tree bindings

This patch defines a platform glue layer for Rockchip SoCs which
support arc-emac driver. It ensures that regulator for the rmii is on
before trying to connect to the ethernet controller. It applies right
speed and mode changes to the grf when ethernet settings change.

Signed-off-by: Romain Perier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethernet: arc: Add support for specific SoC layer device tree bindings

Some platforms have special bank registers which might be used to
select the correct clock or the right mode for Media Indepent

ethernet: arc: Add support for specific SoC layer device tree bindings

Some platforms have special bank registers which might be used to
select the correct clock or the right mode for Media Indepent Interface
controllers. Sometimes, it is also required to activate vcc regulators
in the right order to supply the ethernet controller at the right time.
This patch is an architecture refactoring of the arc-emac device driver.
It adds a new software design which allows to add specific platform
glue layer. Each platform has now its own module which performs custom
initialization and remove for the target and then calls to the
core driver.

Signed-off-by: Romain Perier <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethernet/arc/arc_emac - Add new driver

Driver for non-standard on-chip ethernet device ARC EMAC 10/100,
instantiated in some legacy ARC (Synopsys) FPGA Boards such as
ARCAngel4/ML50x.

Signed-off-by

ethernet/arc/arc_emac - Add new driver

Driver for non-standard on-chip ethernet device ARC EMAC 10/100,
instantiated in some legacy ARC (Synopsys) FPGA Boards such as
ARCAngel4/ML50x.

Signed-off-by: Alexey Brodkin <[email protected]>

Cc: Andy Shevchenko <[email protected]>
Cc: Francois Romieu <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Mischa Jonker <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Paul Gortmaker <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Florian Fainelli <[email protected]>
Cc: David Laight <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...