net: dsa: microchip: rename ksz8 series files

The first KSZ8 series implementation was done for a KSZ8795 device but
since several other KSZ8 devices have been added. Rename these files
to adhere to

net: dsa: microchip: rename ksz8 series files

The first KSZ8 series implementation was done for a KSZ8795 device but
since several other KSZ8 devices have been added. Rename these files
to adhere to the ksz8 naming convention as already used in most
functions and the existing ksz8.h; add an explanatory note.

Signed-off-by: Pieter Van Trappen <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: add support for different DCB app configurations

Add DCB support to configure app trust sources and default port priority.

Following commands can be used for testing:
dcb apptr

net: dsa: microchip: add support for different DCB app configurations

Add DCB support to configure app trust sources and default port priority.

Following commands can be used for testing:
dcb apptrust set dev lan1 order pcp dscp
dcb app replace dev lan1 default-prio 3

Since it is not possible to configure DSCP-Prio mapping per port, this
patch provide only ability to read switch global dscp-prio mapping and
way to enable/disable app trust for DSCP.

Signed-off-by: Oleksij Rempel <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: ptp: fix up PTP dependency

When NET_DSA_MICROCHIP_KSZ_COMMON is built-in but PTP is a loadable
module, the ksz_ptp support still causes a link failure:

ld.lld-16: error: undefi

net: dsa: microchip: ptp: fix up PTP dependency

When NET_DSA_MICROCHIP_KSZ_COMMON is built-in but PTP is a loadable
module, the ksz_ptp support still causes a link failure:

ld.lld-16: error: undefined symbol: ptp_clock_index
>>> referenced by ksz_ptp.c
>>> drivers/net/dsa/microchip/ksz_ptp.o:(ksz_get_ts_info) in archive vmlinux.a

This can happen if NET_DSA_MICROCHIP_KSZ8863_SMI is enabled, or
even if none of the KSZ9477_I2C/KSZ_SPI/KSZ8863_SMI ones are active
but only the common module is.

The most straightforward way to address this is to move the
dependency to NET_DSA_MICROCHIP_KSZ_PTP itself, which can now
only be enabled if both PTP_1588_CLOCK support is reachable
from NET_DSA_MICROCHIP_KSZ_COMMON. Alternatively, one could make
NET_DSA_MICROCHIP_KSZ_COMMON a hidden Kconfig symbol and extend the
PTP_1588_CLOCK_OPTIONAL dependency to NET_DSA_MICROCHIP_KSZ8863_SMI as
well, but that is a little more fragile.

Fixes: eac1ea20261e ("net: dsa: microchip: ptp: add the posix clock support")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

net: dsa: microchip: ptp: add the posix clock support

This patch implement routines (adjfine, adjtime, gettime and settime)
for manipulating the chip's PTP clock. It registers the ptp caps
to posix

net: dsa: microchip: ptp: add the posix clock support

This patch implement routines (adjfine, adjtime, gettime and settime)
for manipulating the chip's PTP clock. It registers the ptp caps
to posix clock register.

Signed-off-by: Christian Eggers <[email protected]>
Co-developed-by: Arun Ramadoss <[email protected]>
Signed-off-by: Arun Ramadoss <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]> # mostly api
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: modularize DSA_TAG_PROTO_NONE

There is no reason that I can see why the no-op tagging protocol should
be registered manually, so make it a module and make all drivers which
have any sort o

net: dsa: modularize DSA_TAG_PROTO_NONE

There is no reason that I can see why the no-op tagging protocol should
be registered manually, so make it a module and make all drivers which
have any sort of reference to DSA_TAG_PROTO_NONE select it.

Note that I don't know if ksz_get_tag_protocol() really needs this,
or if it's just the logic which is poorly written. All switches seem to
have their own tagging protocol, and DSA_TAG_PROTO_NONE is just a
fallback that never gets used.

Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: dsa: microchip: add DSA support for microchip LAN937x

Basic DSA driver support for lan937x and the device will be
configured through SPI interface.
It adds the lan937x_dev_ops in ksz_common.c f

net: dsa: microchip: add DSA support for microchip LAN937x

Basic DSA driver support for lan937x and the device will be
configured through SPI interface.
It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the
functionality of ksz9477 series switch.

drivers/net/dsa/microchip/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS

Signed-off-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: common ksz_spi_probe for ksz switches

As of now, there are two spi probes, one ksz8795_spi.c and other
ksz9477_spi.c. This patch combines two files into single ksz_spi.c. The
di

net: dsa: microchip: common ksz_spi_probe for ksz switches

As of now, there are two spi probes, one ksz8795_spi.c and other
ksz9477_spi.c. This patch combines two files into single ksz_spi.c. The
difference between the two are regmap config and struct ksz8. The regmap
config is assigned based on the platform data. And struct ksz8 is left
untouched, as it is used only ksz8795.c. It can be used for all
other switches also in future.

Signed-off-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: common menuconfig for ksz series switch

This patch replaces the two different menuconfig for ksz9477 and ksz8795
to single ksz_common. so that it can be extended for the other s

net: dsa: microchip: common menuconfig for ksz series switch

This patch replaces the two different menuconfig for ksz9477 and ksz8795
to single ksz_common. so that it can be extended for the other switch
like lan937x. And removes the export_symbols for the extern functions in
the ksz_common.h.

Signed-off-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support

Add KSZ88X3 driver support. We add support for the KXZ88X3 three port
switches using the Microchip SMI Interface. They are support

net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support

Add KSZ88X3 driver support. We add support for the KXZ88X3 three port
switches using the Microchip SMI Interface. They are supported using the
MDIO-Bitbang Interface.

Signed-off-by: Michael Grzeschik <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: ksz: Select KSZ protocol tag

KSZ protocol tag is needed by the KSZ DSA drivers.

Fixes: 0b9f9dfbfab4 ("dsa: Allow tag drivers to be built as modules")
Tested-by: Cristian Birsan <cristian.

net: dsa: ksz: Select KSZ protocol tag

KSZ protocol tag is needed by the KSZ DSA drivers.

Fixes: 0b9f9dfbfab4 ("dsa: Allow tag drivers to be built as modules")
Tested-by: Cristian Birsan <[email protected]>
Signed-off-by: Codrin Ciubotariu <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: add KSZ9477 I2C driver

Add KSZ9477 I2C driver support. The code ksz9477.c and ksz_common.c are
used together to generate the I2C driver.

Signed-off-by: Tristram Ha <Tristram.H

net: dsa: microchip: add KSZ9477 I2C driver

Add KSZ9477 I2C driver support. The code ksz9477.c and ksz_common.c are
used together to generate the I2C driver.

Signed-off-by: Tristram Ha <[email protected]>
[[email protected]: bring up to date, use ksz_common regmap macros]
Signed-off-by: George McCollister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: ksz: Drop NET_DSA_TAG_KSZ9477

This Kconfig option is unused, drop it.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: David S. Miller <[email protected]>

net: dsa: ksz: Drop NET_DSA_TAG_KSZ9477

This Kconfig option is unused, drop it.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Tristram Ha <[email protected]>
Cc: Vivien Didelot <[email protected]>
Cc: Woojung Huh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: ksz: Add Microchip KSZ8795 DSA driver

Add Microchip KSZ8795 DSA driver.

Signed-off-by: Tristram Ha <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Cc: Andrew Lunn <

net: dsa: ksz: Add Microchip KSZ8795 DSA driver

Add Microchip KSZ8795 DSA driver.

Signed-off-by: Tristram Ha <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Tristram Ha <[email protected]>
Cc: Vivien Didelot <[email protected]>
Cc: Woojung Huh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: Initial SPI regmap support

Add basic SPI regmap support into the driver.

Previous patches unconver that ksz_spi_write() is always ever called
with len = 1, 2 or 4. We can thus

net: dsa: microchip: Initial SPI regmap support

Add basic SPI regmap support into the driver.

Previous patches unconver that ksz_spi_write() is always ever called
with len = 1, 2 or 4. We can thus drop the if (len > SPI_TX_BUF_LEN)
check and we can also drop the allocation of the txbuf which is part
of the driver data and wastes 256 bytes for no reason. Regmap covers
the whole thing now.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Tristram Ha <[email protected]>
Cc: Woojung Huh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

net: dsa: ksz: Rename NET_DSA_TAG_KSZ to _KSZ9477

Rename the tag Kconfig option and related macros in preparation for
addition of new KSZ family switches with different tag formats.

Signed-off-by:

net: dsa: ksz: Rename NET_DSA_TAG_KSZ to _KSZ9477

Rename the tag Kconfig option and related macros in preparation for
addition of new KSZ family switches with different tag formats.

Signed-off-by: Tristram Ha <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Cc: Vivien Didelot <[email protected]>
Cc: Woojung Huh <[email protected]>
Cc: David S. Miller <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: break KSZ9477 DSA driver into two files

Break KSZ9477 DSA driver into two files in preparation to add more KSZ
switch drivers.
Add common functions in ksz_common.h so that other

net: dsa: microchip: break KSZ9477 DSA driver into two files

Break KSZ9477 DSA driver into two files in preparation to add more KSZ
switch drivers.
Add common functions in ksz_common.h so that other KSZ switch drivers
can access code in ksz_common.c.
Add ksz_spi.h for common functions used by KSZ switch SPI drivers.

Signed-off-by: Tristram Ha <[email protected]>
Reviewed-by: Woojung Huh <[email protected]>
Reviewed-by: Pavel Machek <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: dsa: microchip: rename ksz_spi.c to ksz9477_spi.c

Rename ksz_spi.c to ksz9477_spi.c and update Kconfig in preparation to add
more KSZ switch drivers.

Signed-off-by: Tristram Ha <Tristram.Ha@mi

net: dsa: microchip: rename ksz_spi.c to ksz9477_spi.c

Rename ksz_spi.c to ksz9477_spi.c and update Kconfig in preparation to add
more KSZ switch drivers.

Signed-off-by: Tristram Ha <[email protected]>
Reviewed-by: Woojung Huh <[email protected]>
Reviewed-by: Pavel Machek <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

dsa: add DSA switch driver for Microchip KSZ9477

The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch
with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs.
T

dsa: add DSA switch driver for Microchip KSZ9477

The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch
with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs.
The other 2 ports have interfaces that can be configured as SGMII, RGMII, MII
or RMII. Either of these may connect directly to a host processor or
to an external PHY. The SGMII port may interface to a fiber optic transceiver.

This driver currently supports vlan, fdb, mdb & mirror dsa switch operations.

Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Woojung Huh <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...