net: remove sb1000 cable modem driver

This one is hilariously outdated, it provided a faster downlink over
TV cable for users of analog modems in the 1990s, through an ISA card.

The web page for th

net: remove sb1000 cable modem driver

This one is hilariously outdated, it provided a faster downlink over
TV cable for users of analog modems in the 1990s, through an ISA card.

The web page for the userspace tools has been broken for 25 years, and
the driver has only ever seen mechanical updates.

Link: http://web.archive.org/web/20000611165545/http://home.adelphia.net:80/~siglercm/sb1000.html
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

net: Always descend into dsa/ folder with CONFIG_NET_DSA enabled

Stephen reported that he was unable to get the dsa_loop driver to get
probed, and the reason ended up being because he had CONFIG_FIX

net: Always descend into dsa/ folder with CONFIG_NET_DSA enabled

Stephen reported that he was unable to get the dsa_loop driver to get
probed, and the reason ended up being because he had CONFIG_FIXED_PHY=y
in his kernel configuration. As Masahiro explained it:

"obj-m += dsa/" means everything under dsa/ must be modular.

If there is a built-in object under dsa/ with CONFIG_NET_DSA=m,
you cannot do "obj-$(CONFIG_NET_DSA) += dsa/".

You need to change it back to "obj-y += dsa/".

This was the case here whereby CONFIG_NET_DSA=m, and so the
obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o rule is not executed and
the DSA loop mdio_board info structure is not registered with the
kernel, and eventually the device is simply not found.

To preserve the intention of the original commit of limiting the amount
of folder descending, conditionally descend into drivers/net/dsa when
CONFIG_NET_DSA is enabled.

Fixes: 227d72063fcc ("dsa: simplify Kconfig symbols and dependencies")
Reported-by: Stephen Langstaff <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

pfcp: add PFCP module

Packet Forwarding Control Protocol (PFCP) is a 3GPP Protocol
used between the control plane and the user plane function.
It is specified in TS 29.244[1].

Note that this module

pfcp: add PFCP module

Packet Forwarding Control Protocol (PFCP) is a 3GPP Protocol
used between the control plane and the user plane function.
It is specified in TS 29.244[1].

Note that this module is not designed to support this Protocol
in the kernel space. There is no support for parsing any PFCP messages.
There is no API that could be used by any userspace daemon.
Basically it does not support PFCP. This protocol is sophisticated
and there is no need for implementing it in the kernel. The purpose
of this module is to allow users to setup software and hardware offload
of PFCP packets using tc tool.

When user requests to create a PFCP device, a new socket is created.
The socket is set up with port number 8805 which is specific for
PFCP [29.244 4.2.2]. This allow to receive PFCP request messages,
response messages use other ports.

Note that only one PFCP netdev can be created.

Only IPv4 is supported at this time.

[1] https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=3111

Signed-off-by: Wojciech Drewek <[email protected]>
Signed-off-by: Marcin Szycik <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

netkit, bpf: Add bpf programmable net device

This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is

netkit, bpf: Add bpf programmable net device

This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.

One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).

In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.

Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f235d ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.

Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.

An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.

Co-developed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>

show more ...

appletalk: remove ipddp driver

After the cops driver is removed, ipddp is now the only
CONFIG_DEV_APPLETALK but as far as I can tell, this also has no users
and can be removed, making appletalk supp

appletalk: remove ipddp driver

After the cops driver is removed, ipddp is now the only
CONFIG_DEV_APPLETALK but as far as I can tell, this also has no users
and can be removed, making appletalk support purely based on ethertalk,
using ethernet hardware.

Link: https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/netdev/[email protected]/
Cc: Doug Brown <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: thunderbolt: Move into own directory

We will be adding tracepoints to the driver so instead of littering the
main network driver directory, move the driver into its own directory.
While there,

net: thunderbolt: Move into own directory

We will be adding tracepoints to the driver so instead of littering the
main network driver directory, move the driver into its own directory.
While there, rename the module to thunderbolt_net (with underscore) to
match with the thunderbolt_dma_test convention.

Signed-off-by: Mika Westerberg <[email protected]>
Acked-by: Yehezkel Bernat <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: add framework to support Ethernet PSE and PDs devices

This framework was create with intention to provide support for Ethernet PSE
(Power Sourcing Equipment) and PDs (Powered Device).

At curre

net: add framework to support Ethernet PSE and PDs devices

This framework was create with intention to provide support for Ethernet PSE
(Power Sourcing Equipment) and PDs (Powered Device).

At current step this patch implements generic PSE support for PoDL (Power over
Data Lines 802.3bu) specification with reserving name space for PD devices as
well.

This framework can be extended to support 802.3af and 802.3at "Power via the
Media Dependent Interface" (or PoE/Power over Ethernet)

Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

vxlan: move to its own directory

vxlan.c has grown too long. This patch moves
it to its own directory. subsequent patches add new
functionality in new files.

Signed-off-by: Roopa Prabhu <roopa@nvid

vxlan: move to its own directory

vxlan.c has grown too long. This patch moves
it to its own directory. subsequent patches add new
functionality in new files.

Signed-off-by: Roopa Prabhu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

amt: add control plane of amt interface

It adds definitions and control plane code for AMT.
this is very similar to udp tunneling interfaces such as gtp, vxlan, etc.
In the next patch, data plane co

amt: add control plane of amt interface

It adds definitions and control plane code for AMT.
this is very similar to udp tunneling interfaces such as gtp, vxlan, etc.
In the next patch, data plane code will be added.

Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: mhi: Remove MBIM protocol

The MBIM protocol has now been integrated in a proper WWAN driver. We
can then revert back to a simpler driver for mhi_net, which is used
for raw IP or QMAP protocol (

net: mhi: Remove MBIM protocol

The MBIM protocol has now been integrated in a proper WWAN driver. We
can then revert back to a simpler driver for mhi_net, which is used
for raw IP or QMAP protocol (via rmnet link).

- Remove protocol management
- Remove WWAN framework usage (only valid for mbim)
- Remove net/mhi directory for simpler mhi_net.c file

Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

make legacy ISA probe optional

There are very few ISA drivers left that rely on the static probing from
drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT
symbol, and drop the

make legacy ISA probe optional

There are very few ISA drivers left that rely on the static probing from
drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT
symbol, and drop the entire probe logic when that is disabled.

The 9 drivers that are called from Space.c are the same set that
calls netdev_boot_setup_check().

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

mctp: Add initial driver infrastructure

Add an empty drivers/net/mctp/, for future interface drivers.

Signed-off-by: Jeremy Kerr <[email protected]>
Signed-off-by: David S. Miller <davem@dave

mctp: Add initial driver infrastructure

Add an empty drivers/net/mctp/, for future interface drivers.

Signed-off-by: Jeremy Kerr <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: Add a WWAN subsystem

This change introduces initial support for a WWAN framework. Given the
complexity and heterogeneity of existing WWAN hardwares and interfaces,
there is no strict definition

net: Add a WWAN subsystem

This change introduces initial support for a WWAN framework. Given the
complexity and heterogeneity of existing WWAN hardwares and interfaces,
there is no strict definition of what a WWAN device is and how it should
be represented. It's often a collection of multiple devices that perform
the global WWAN feature (netdev, tty, chardev, etc).

One usual way to expose modem controls and configuration is via high
level protocols such as the well known AT command protocol, MBIM or
QMI. The USB modems started to expose them as character devices, and
user daemons such as ModemManager learnt to use them.

This initial version adds the concept of WWAN port, which is a logical
pipe to a modem control protocol. The protocols are rawly exposed to
user via character device, allowing straigthforward support in existing
tools (ModemManager, ofono...). The WWAN core takes care of the generic
part, including character device management, and relies on port driver
operations to receive/submit protocol data.

Since the different devices exposing protocols for a same WWAN hardware
do not necessarily know about each others (e.g. two different USB
interfaces, PCI/MHI channel devices...) and can be created/removed in
different orders, the WWAN core ensures that all WAN ports contributing
to the 'whole' WWAN feature are grouped under the same virtual WWAN
device, relying on the provided parent device (e.g. mhi controller,
USB device). It's a 'trick' I copied from Johannes's earlier WWAN
subsystem proposal.

This initial version is purposely minimalist, it's essentially moving
the generic part of the previously proposed mhi_wwan_ctrl driver inside
a common WWAN framework, but the implementation is open and flexible
enough to allow extension for further drivers.

Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

dsa: simplify Kconfig symbols and dependencies

1. Remove CONFIG_HAVE_NET_DSA.

CONFIG_HAVE_NET_DSA is a legacy leftover from the times when drivers
should have selected CONFIG_NET_DSA manually.
Curr

dsa: simplify Kconfig symbols and dependencies

1. Remove CONFIG_HAVE_NET_DSA.

CONFIG_HAVE_NET_DSA is a legacy leftover from the times when drivers
should have selected CONFIG_NET_DSA manually.
Currently, all drivers has explicit 'depends on NET_DSA', so this is
no more needed.

2. CONFIG_HAVE_NET_DSA dependencies became CONFIG_NET_DSA's ones.

- dropped !S390 dependency which was introduced to be sure NET_DSA
can select CONFIG_PHYLIB. DSA migrated to Phylink almost 3 years
ago and the PHY library itself doesn't depend on !S390 since
commit 870a2b5e4fcd ("phylib: remove !S390 dependeny from Kconfig");
- INET dependency is kept to be sure we can select NET_SWITCHDEV;
- NETDEVICES dependency is kept to be sure we can select PHYLINK.

3. DSA drivers menu now depends on NET_DSA.

Instead on 'depends on NET_DSA' on every single driver, the entire
menu now depends on it. This eliminates a lot of duplicated lines
from Kconfig with no loss (when CONFIG_NET_DSA=m, drivers also can
be only m or n).
This also has a nice side effect that there's no more empty menu on
configurations without DSA.

4. Kbuild will now descend into 'drivers/net/dsa' only when
CONFIG_NET_DSA is y or m.

This is safe since no objects inside this folder can be built without
DSA core, as well as when CONFIG_NET_DSA=m, no objects can be
built-in.

Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: mhi: Add dedicated folder

Create a dedicated mhi directory for mhi-net, mhi-net is going to
be split into differente files (for additional protocol support).

Signed-off-by: Loic Poulain <loic.

net: mhi: Add dedicated folder

Create a dedicated mhi directory for mhi-net, mhi-net is going to
be split into differente files (for additional protocol support).

Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: Add mhi-net driver

This patch adds a new network driver implementing MHI transport for
network packets. Packets can be in any format, though QMAP (rmnet)
is the usual protocol (flow control + P

net: Add mhi-net driver

This patch adds a new network driver implementing MHI transport for
network packets. Packets can be in any format, though QMAP (rmnet)
is the usual protocol (flow control + PDN mux).

It support two MHI devices, IP_HW0 which is, the path to the IPA
(IP accelerator) on qcom modem, And IP_SW0 which is the software
driven IP path (to modem CPU).

Signed-off-by: Loic Poulain <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

wimax: move out to staging

There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.

According to https://en.w

wimax: move out to staging

There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.

According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.

NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.

WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.

Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.

Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.

Acked-by: Jakub Kicinski <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-By: Inaky Perez-Gonzalez <[email protected]>
Acked-by: Johannes Berg <[email protected]>
Suggested-by: Inaky Perez-Gonzalez <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

net: mdio: Move MDIO drivers into a new subdirectory

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies

net: mdio: Move MDIO drivers into a new subdirectory

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.

Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.

v2:
Fix typo in commit message

Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: pcs: Move XPCS into new PCS subdirectory

Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs

Start a

net: pcs: Move XPCS into new PCS subdirectory

Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs

Start a naming convention of all PCS files use the prefix pcs-, and
rename the XPCS files to fit.

v2:
Add include/linux/pcs

v4:
Fix include path in stmmac.
Remove PCS_DEVICES to avoid new prompts

Cc: Jose Abreu <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

soc: qcom: ipa: support build of IPA code

Add build and Kconfig support for the Qualcomm IPA driver.

Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.

The Bareudp tunnel module provides a generic L3 encapsulation
tunnelling module for tunnelling differe

net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.

The Bareudp tunnel module provides a generic L3 encapsulation
tunnelling module for tunnelling different protocols like MPLS,
IP,NSH etc inside a UDP tunnel.

Signed-off-by: Martin Varghese <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

thunderbolt: Update Kconfig entries to USB4

Since the driver now supports USB4 which is the standard going forward,
update the Kconfig entry to mention this and rename the entry from
CONFIG_THUNDERB

thunderbolt: Update Kconfig entries to USB4

Since the driver now supports USB4 which is the standard going forward,
update the Kconfig entry to mention this and rename the entry from
CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the
correct option if they want to enable USB4.

Also do the same for Thunderbolt network driver.

Signed-off-by: Mika Westerberg <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

net: WireGuard secure network tunnel

WireGuard is a layer 3 secure networking tunnel made specifically for
the kernel, that aims to be much simpler and easier to audit than IPsec.
Extensive document

net: WireGuard secure network tunnel

WireGuard is a layer 3 secure networking tunnel made specifically for
the kernel, that aims to be much simpler and easier to audit than IPsec.
Extensive documentation and description of the protocol and
considerations, along with formal proofs of the cryptography, are
available at:

* https://www.wireguard.com/
* https://www.wireguard.com/papers/wireguard.pdf

This commit implements WireGuard as a simple network device driver,
accessible in the usual RTNL way used by virtual network drivers. It
makes use of the udp_tunnel APIs, GRO, GSO, NAPI, and the usual set of
networking subsystem APIs. It has a somewhat novel multicore queueing
system designed for maximum throughput and minimal latency of encryption
operations, but it is implemented modestly using workqueues and NAPI.
Configuration is done via generic Netlink, and following a review from
the Netlink maintainer a year ago, several high profile userspace tools
have already implemented the API.

This commit also comes with several different tests, both in-kernel
tests and out-of-kernel tests based on network namespaces, taking profit
of the fact that sockets used by WireGuard intentionally stay in the
namespace the WireGuard interface was originally created, exactly like
the semantics of userspace tun devices. See wireguard.com/netns/ for
pictures and examples.

The source code is fairly short, but rather than combining everything
into a single file, WireGuard is developed as cleanly separable files,
making auditing and comprehension easier. Things are laid out as
follows:

* noise.[ch], cookie.[ch], messages.h: These implement the bulk of the
cryptographic aspects of the protocol, and are mostly data-only in
nature, taking in buffers of bytes and spitting out buffers of
bytes. They also handle reference counting for their various shared
pieces of data, like keys and key lists.

* ratelimiter.[ch]: Used as an integral part of cookie.[ch] for
ratelimiting certain types of cryptographic operations in accordance
with particular WireGuard semantics.

* allowedips.[ch], peerlookup.[ch]: The main lookup structures of
WireGuard, the former being trie-like with particular semantics, an
integral part of the design of the protocol, and the latter just
being nice helper functions around the various hashtables we use.

* device.[ch]: Implementation of functions for the netdevice and for
rtnl, responsible for maintaining the life of a given interface and
wiring it up to the rest of WireGuard.

* peer.[ch]: Each interface has a list of peers, with helper functions
available here for creation, destruction, and reference counting.

* socket.[ch]: Implementation of functions related to udp_socket and
the general set of kernel socket APIs, for sending and receiving
ciphertext UDP packets, and taking care of WireGuard-specific sticky
socket routing semantics for the automatic roaming.

* netlink.[ch]: Userspace API entry point for configuring WireGuard
peers and devices. The API has been implemented by several userspace
tools and network management utility, and the WireGuard project
distributes the basic wg(8) tool.

* queueing.[ch]: Shared function on the rx and tx path for handling
the various queues used in the multicore algorithms.

* send.c: Handles encrypting outgoing packets in parallel on
multiple cores, before sending them in order on a single core, via
workqueues and ring buffers. Also handles sending handshake and cookie
messages as part of the protocol, in parallel.

* receive.c: Handles decrypting incoming packets in parallel on
multiple cores, before passing them off in order to be ingested via
the rest of the networking subsystem with GRO via the typical NAPI
poll function. Also handles receiving handshake and cookie messages
as part of the protocol, in parallel.

* timers.[ch]: Uses the timer wheel to implement protocol particular
event timeouts, and gives a set of very simple event-driven entry
point functions for callers.

* main.c, version.h: Initialization and deinitialization of the module.

* selftest/*.h: Runtime unit tests for some of the most security
sensitive functions.

* tools/testing/selftests/wireguard/netns.sh: Aforementioned testing
script using network namespaces.

This commit aims to be as self-contained as possible, implementing
WireGuard as a standalone module not needing much special handling or
coordination from the network subsystem. I expect for future
optimizations to the network stack to positively improve WireGuard, and
vice-versa, but for the time being, this exists as intentionally
standalone.

We introduce a menu option for CONFIG_WIREGUARD, as well as providing a
verbose debug log and self-tests via CONFIG_WIREGUARD_DEBUG.

Signed-off-by: Jason A. Donenfeld <[email protected]>
Cc: David Miller <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: Always descend into dsa/

Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y,
CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a
functional state where the mock-up dri

net: Always descend into dsa/

Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y,
CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a
functional state where the mock-up driver is registered. Turns out that
we are not descending into drivers/net/dsa/ unconditionally, and we
won't be able to link-in dsa_loop_bdinfo.o which does the actual mock-up
mdio device registration.

Reported-by: Jiri Pirko <[email protected]>
Fixes: 40013ff20b1b ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Tested-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: Introduce net_failover driver

The net_failover driver provides an automated failover mechanism via APIs
to create and destroy a failover master netdev and manages a primary and
standby slave ne

net: Introduce net_failover driver

The net_failover driver provides an automated failover mechanism via APIs
to create and destroy a failover master netdev and manages a primary and
standby slave netdevs that get registered via the generic failover
infrastructure.

The failover netdev acts a master device and controls 2 slave devices. The
original paravirtual interface gets registered as 'standby' slave netdev and
a passthru/vf device with the same MAC gets registered as 'primary' slave
netdev. Both 'standby' and 'failover' netdevs are associated with the same
'pci' device. The user accesses the network interface via 'failover' netdev.
The 'failover' netdev chooses 'primary' netdev as default for transmits when
it is available with link up and running.

This can be used by paravirtual drivers to enable an alternate low latency
datapath. It also enables hypervisor controlled live migration of a VM with
direct attached VF by failing over to the paravirtual datapath when the VF
is unplugged.

Signed-off-by: Sridhar Samudrala <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...