treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mmc: Kconfig: downgrade CONFIG_MMC_DEBUG for host drivers only

We have removed all code depending on CONFIG_MMC_DEBUG
from mmc core now. So it's safe to make CONFIG_MMC_DEBUG
just for host drivers o

mmc: Kconfig: downgrade CONFIG_MMC_DEBUG for host drivers only

We have removed all code depending on CONFIG_MMC_DEBUG
from mmc core now. So it's safe to make CONFIG_MMC_DEBUG
just for host drivers only and we expect to kill this option
in the future.

Signed-off-by: Shawn Lin <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>

show more ...

mmc: block: Move files to core

Once upon a time it made sense to keep the mmc block device driver and its
related code, in its own directory called card. Over time, more an more
functions/structures

mmc: block: Move files to core

Once upon a time it made sense to keep the mmc block device driver and its
related code, in its own directory called card. Over time, more an more
functions/structures have become shared through generic mmc header files,
between the core and the card directory. In other words, the relationship
between them has become closer.

By sharing functions/structures via generic header files, it becomes easy
for outside users to abuse them. In a way to avoid that from happen, let's
move the files from card directory into the core directory, as it enables
us to move definitions of functions/structures into mmc core specific
header files.

Note, this is only the first step in providing a cleaner mmc interface for
outside users. Following changes will do the actual cleanup, as that is not
part of this change.

Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>

show more ...

mmc: sdhci-pci: add platform data

Add a means of getting platform data for the SDHCI PCI
devices. The data is stored against the slot not the
device in order to support multi-slot devices.

The dat

mmc: sdhci-pci: add platform data

Add a means of getting platform data for the SDHCI PCI
devices. The data is stored against the slot not the
device in order to support multi-slot devices.

The data allows platform-specific setup (such as getting
GPIO numbers from firmware or setting up wl12xx for SDIO)
to be done in platform support files instead of the
sdhci-pci driver.

Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Chris Ball <[email protected]>

show more ...

mmc: Makefile: Fix EXTRA_CFLAGS assignment

The EXTRA_CFLAGS assignment in mmc/Makefile was not accomplishing
anything because this flag only has effect on sources at the same level
as the makefile (

mmc: Makefile: Fix EXTRA_CFLAGS assignment

The EXTRA_CFLAGS assignment in mmc/Makefile was not accomplishing
anything because this flag only has effect on sources at the same level
as the makefile (i.e., per directory). Since card/, core/, and host/
rely on MMC_DEBUG, the subdir-ccflags-y variant seems to be the
appropriate choice.

Signed-off-by: matt mooney <[email protected]>
Signed-off-by: Chris Ball <[email protected]>

show more ...

mmc: Move core functions to subdir

Create a "core" subdirectory to house the central bus handling
functions.

Signed-off-by: Pierre Ossman <[email protected]>

mmc: Move host and card drivers to subdirs

Clean up the drivers/mmc directory by moving card and host drivers
into subdirectories.

Signed-off-by: Pierre Ossman <[email protected]>

mmc: Move queue functions to mmc_block

The mmc block queue functions are tailored for the mmc_block
driver, so move those functions into that module.

Signed-off-by: Pierre Ossman <[email protected]>

[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT

[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't
need to mention every specific AT91 processor explicitly.

Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK
boards.

Signed-off-by: Andrew Victor <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile

Signed-off-by: Alex Dubov <[email protected]>
Cc: Daniel Qarras <[email protected]>
Acked-by: Pierre Ossman <[email protected]>
Cc:

[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile

Signed-off-by: Alex Dubov <[email protected]>
Cc: Daniel Qarras <[email protected]>
Acked-by: Pierre Ossman <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, e

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.

(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:

(*) Block I/O tracing.

(*) Disk partition code.

(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.

(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.

(*) MTD blockdev handling and FTL.

(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.

(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.

(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.

(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.

(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:

(*) Default blockdev file operations (to give error ENODEV on opening).

(*) Makes some /proc changes:

(*) /proc/devices does not list any blockdevs.

(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.

(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.

(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).

(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>

show more ...

[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1

Patch from Pavel Pisa

This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
ve

[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1

Patch from Pavel Pisa

This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
version to support scatter-gather DMA, to conform to latest Pierre Ossman's
and Russell King's MMC-SD Linux 2.6.x infrastructure.
The handling of all events has been moved to the softirq context
and is designed with no busy-looping in mind. Unfortunately
some controller bugs has to be overcome by limited looping
about 2-20 usec but these are observed only for initial card
recognition phase.

There are still some missing/missed IRQs problems under heavy load.
Help of somebody with access to the full SDHC design information
is probably necessary.

Regenerated against 2.6.16-git-060402 to solve clash with other patches.

Signed-off-by: Pavel Pisa <[email protected]>
Acked-by: Sascha Hauer <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)

Patch from Andrew Victor

This patch adds support for the MMC/SD card interface on the Atmel
AT91RM9200 processor.

Original driver was by Ni

[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)

Patch from Andrew Victor

This patch adds support for the MMC/SD card interface on the Atmel
AT91RM9200 processor.

Original driver was by Nick Randell, but a number of people have
subsequently worked on it. It's currently maintained by Malcolm Noyes.

Signed-off-by: Andrew Victor <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[MMC] Pass -DDEBUG on compiler command line if MMC_DEBUG selected

Rather than each driver test MMC_DEBUG itself, and define DEBUG,
pass it in via the makefile instead.

Fix drivers to use pr_debug()

[MMC] Pass -DDEBUG on compiler command line if MMC_DEBUG selected

Rather than each driver test MMC_DEBUG itself, and define DEBUG,
pass it in via the makefile instead.

Fix drivers to use pr_debug() where appropriate, and avoid defining
a DEBUG() macro.

Signed-off-by: Russell King <[email protected]>

show more ...

[MMC] Add OMAP MMC host driver

Adds OMAP MMC driver.

Signed-off-by: Juha Yrjölä <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Carlos Aguiar <carlos.aguiar@i

[MMC] Add OMAP MMC host driver

Adds OMAP MMC driver.

Signed-off-by: Juha Yrjölä <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Carlos Aguiar <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[PATCH] mmc: Secure Digital Host Controller Interface driver

Driver for the Secure Digital Host Controller Interface specification.

Signed-off-by: Pierre Ossman <[email protected]>
Cc: Russell King

[PATCH] mmc: Secure Digital Host Controller Interface driver

Driver for the Secure Digital Host Controller Interface specification.

Signed-off-by: Pierre Ossman <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Au1[12]00 mmc driver. Only tested on the Au1200 at this point though
it should work on the Au1100 as well. Updated defconfig to include driver.

Signed-off-by: Ralf Baechle <[email protected]>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...