treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mmc: core: Remove option not to use blk-mq

Remove config option MMC_MQ_DEFAULT and parameter mmc_use_blk_mq, so that
blk-mq must be used always.

Signed-off-by: Adrian Hunter <[email protected]

mmc: core: Remove option not to use blk-mq

Remove config option MMC_MQ_DEFAULT and parameter mmc_use_blk_mq, so that
blk-mq must be used always.

Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Tested-by: Linus Walleij <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>

show more ...

mmc: core: Add parameter use_blk_mq

Until mmc has blk-mq support fully implemented and tested, add a parameter
use_blk_mq, set to true if config option MMC_MQ_DEFAULT is selected, which
it is by def

mmc: core: Add parameter use_blk_mq

Until mmc has blk-mq support fully implemented and tested, add a parameter
use_blk_mq, set to true if config option MMC_MQ_DEFAULT is selected, which
it is by default.

Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Tested-by: Linus Walleij <[email protected]>

show more ...

mmc: Kconfig: downgrade CONFIG_MMC_DEBUG for host drivers only

We have removed all code depending on CONFIG_MMC_DEBUG
from mmc core now. So it's safe to make CONFIG_MMC_DEBUG
just for host drivers o

mmc: Kconfig: downgrade CONFIG_MMC_DEBUG for host drivers only

We have removed all code depending on CONFIG_MMC_DEBUG
from mmc core now. So it's safe to make CONFIG_MMC_DEBUG
just for host drivers only and we expect to kill this option
in the future.

Signed-off-by: Shawn Lin <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>

show more ...

mmc: block: Move files to core

Once upon a time it made sense to keep the mmc block device driver and its
related code, in its own directory called card. Over time, more an more
functions/structures

mmc: block: Move files to core

Once upon a time it made sense to keep the mmc block device driver and its
related code, in its own directory called card. Over time, more an more
functions/structures have become shared through generic mmc header files,
between the core and the card directory. In other words, the relationship
between them has become closer.

By sharing functions/structures via generic header files, it becomes easy
for outside users to abuse them. In a way to avoid that from happen, let's
move the files from card directory into the core directory, as it enables
us to move definitions of functions/structures into mmc core specific
header files.

Note, this is only the first step in providing a cleaner mmc interface for
outside users. Following changes will do the actual cleanup, as that is not
part of this change.

Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>

show more ...

mmc: explicitly mention SDIO support in Kconfig

Signed-off-by: Pierre Ossman <[email protected]>

[S390] Kconfig: menus with depends on HAS_IOMEM.

Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <s

[S390] Kconfig: menus with depends on HAS_IOMEM.

Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <[email protected]>

show more ...

mmc: Use menuconfig objects

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan En

mmc: Use menuconfig objects

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Pierre Ossman <[email protected]>

show more ...

mmc: support unsafe resume of cards

Since many have the system root on MMC/SD we must allow some foot
shooting when it comes to resume.

We cannot detect if a card is removed and reinserted during s

mmc: support unsafe resume of cards

Since many have the system root on MMC/SD we must allow some foot
shooting when it comes to resume.

We cannot detect if a card is removed and reinserted during suspend,
so the safe approach would be to assume it was, avoiding potential
filesystem corruption. This will of course not work if you cannot
release the card before suspend.

This commit adds a compile time option that makes the MMC layer
assume the card wasn't touched if it is redetected upon resume.

Signed-off-by: Pierre Ossman <[email protected]>

show more ...

mmc: Move host and card drivers to subdirs

Clean up the drivers/mmc directory by moving card and host drivers
into subdirectories.

Signed-off-by: Pierre Ossman <[email protected]>

[PATCH] TIFM should depend on PCI - TIFM_CORE leads to use of pci primitives

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT

[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't
need to mention every specific AT91 processor explicitly.

Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK
boards.

Signed-off-by: Andrew Victor <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

trivial change for mmc/Kconfig: MMC_PXA does not mean only PXA255

PXA MMC driver supports not only PXA255 but also PXA250 and newer ones

Signed-off-by: Marcin Juszkiewicz <[email protected]>
Sig

trivial change for mmc/Kconfig: MMC_PXA does not mean only PXA255

PXA MMC driver supports not only PXA255 but also PXA250 and newer ones

Signed-off-by: Marcin Juszkiewicz <[email protected]>
Signed-off-by: Pierre Ossman <[email protected]>

show more ...

[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile

Signed-off-by: Alex Dubov <[email protected]>
Cc: Daniel Qarras <[email protected]>
Acked-by: Pierre Ossman <[email protected]>
Cc:

[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile

Signed-off-by: Alex Dubov <[email protected]>
Cc: Daniel Qarras <[email protected]>
Acked-by: Pierre Ossman <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, e

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.

(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:

(*) Block I/O tracing.

(*) Disk partition code.

(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.

(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.

(*) MTD blockdev handling and FTL.

(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.

(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.

(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.

(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.

(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:

(*) Default blockdev file operations (to give error ENODEV on opening).

(*) Makes some /proc changes:

(*) /proc/devices does not list any blockdevs.

(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.

(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.

(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).

(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>

show more ...

[MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy

The driver is selectable on other than Au1200 Alchemy systems but won't
build nor work - there is no MMC hw.

Signed-off-by: Ralf Baechle <ralf

[MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy

The driver is selectable on other than Au1200 Alchemy systems but won't
build nor work - there is no MMC hw.

Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1

Patch from Pavel Pisa

This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
ve

[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1

Patch from Pavel Pisa

This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
version to support scatter-gather DMA, to conform to latest Pierre Ossman's
and Russell King's MMC-SD Linux 2.6.x infrastructure.
The handling of all events has been moved to the softirq context
and is designed with no busy-looping in mind. Unfortunately
some controller bugs has to be overcome by limited looping
about 2-20 usec but these are observed only for initial card
recognition phase.

There are still some missing/missed IRQs problems under heavy load.
Help of somebody with access to the full SDHC design information
is probably necessary.

Regenerated against 2.6.16-git-060402 to solve clash with other patches.

Signed-off-by: Pavel Pisa <[email protected]>
Acked-by: Sascha Hauer <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)

Patch from Andrew Victor

This patch adds support for the MMC/SD card interface on the Atmel
AT91RM9200 processor.

Original driver was by Ni

[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)

Patch from Andrew Victor

This patch adds support for the MMC/SD card interface on the Atmel
AT91RM9200 processor.

Original driver was by Nick Randell, but a number of people have
subsequently worked on it. It's currently maintained by Malcolm Noyes.

Signed-off-by: Andrew Victor <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[MMC] Add OMAP MMC host driver

Adds OMAP MMC driver.

Signed-off-by: Juha Yrjölä <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Carlos Aguiar <carlos.aguiar@i

[MMC] Add OMAP MMC host driver

Adds OMAP MMC driver.

Signed-off-by: Juha Yrjölä <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Carlos Aguiar <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

[PATCH] mmc: Secure Digital Host Controller Interface driver

Driver for the Secure Digital Host Controller Interface specification.

Signed-off-by: Pierre Ossman <[email protected]>
Cc: Russell King

[PATCH] mmc: Secure Digital Host Controller Interface driver

Driver for the Secure Digital Host Controller Interface specification.

Signed-off-by: Pierre Ossman <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[MMC] Remove extra character in AU1XXX MMC Kconfig entry

An obvious vi fat finger on my part.

Signed-off-by: Jordan Crouse <[email protected]>
Signed-off-by: Russell King <[email protected].

[MMC] Remove extra character in AU1XXX MMC Kconfig entry

An obvious vi fat finger on my part.

Signed-off-by: Jordan Crouse <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

Au1[12]00 mmc driver. Only tested on the Au1200 at this point though
it should work on the Au1100 as well. Updated defconfig to include driver.

Signed-off-by: Ralf Baechle <[email protected]>

[PATCH] MMC: wbsd update

Updates to the wbsd driver.

* Fix to handle DAT3 card detection.
* Fixed bug which could cau

[PATCH] MMC: wbsd update

Updates to the wbsd driver.

* Fix to handle DAT3 card detection.
* Fixed bug which could cause large writes to stall in FIFO mode.
* Plug 'n Play support. In most cases you need ACPI PNP for this to work.
* Uses generic DMA API (ISA dependency removed).

show more ...

[PATCH] ISA DMA Kconfig fixes - part 3

Drivers that expect ISA DMA API are marked as such in Kconfig.

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <

[PATCH] ISA DMA Kconfig fixes - part 3

Drivers that expect ISA DMA API are marked as such in Kconfig.

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...