misc: ds1682: Constify 'struct bin_attribute'

The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or

misc: ds1682: Constify 'struct bin_attribute'

The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.

Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-9-ba5e79fe8771@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: Drop explicit initialization of struct i2c_device_id::driver_data to 0

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This

misc: Drop explicit initialization of struct i2c_device_id::driver_data to 0

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

While add it, also remove commas after the sentinel entries.

Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: ds1682: Add NVMEM support

Add NVMEM support for the internal EEPROM.

Signed-off-by: Sean Anderson <[email protected]>
Link: https://lore.kernel.org/r/20240315213540.1682964-1-sean.ander

misc: ds1682: Add NVMEM support

Add NVMEM support for the internal EEPROM.

Signed-off-by: Sean Anderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("

misc: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

While touching these drivers, fix alignment in apds990x.c and bh1770glc.c.

Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: ds1682: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@p

misc: ds1682: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <[email protected]>
Reviewed-by: Jeremy Kerr <[email protected]>
Reviewed-by: Benjamin Mugnier <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Crt Mori <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Marek Behún <[email protected]> # for leds-turris-omnia
Acked-by: Andy Shevchenko <[email protected]>
Reviewed-by: Petr Machata <[email protected]> # for mlxsw
Reviewed-by: Maximilian Luz <[email protected]> # for surface3_power
Acked-by: Srinivas Pandruvada <[email protected]> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <[email protected]> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <[email protected]> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <[email protected]> # for versaclock5
Reviewed-by: Ajay Gupta <[email protected]> # for ucsi_ccg
Acked-by: Jonathan Cameron <[email protected]> # for iio
Acked-by: Peter Rosin <[email protected]> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <[email protected]> # for lontium-lt8912b
Reviewed-by: Jean Delvare <[email protected]> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <[email protected]> # for IPMI
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: Sebastian Reichel <[email protected]> # for drivers/power
Acked-by: Krzysztof Hałasa <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Enrico Weigelt <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: ds1682: Ignore update-in-progress ETC reads

The Elapsed Time Counter (ETC) registers are not buffered for reading.
If a 250ms tick occurs while data is being read out, the result can be
a comb

misc: ds1682: Ignore update-in-progress ETC reads

The Elapsed Time Counter (ETC) registers are not buffered for reading.
If a 250ms tick occurs while data is being read out, the result can be
a combination of old and new values. This can occur at the byte level
(giving a time in the future) or the individual bit level (giving a
time in the past). We catch both these cases by reading until we get
two equal or consecutive values. After five unsuccessful attempts we
give up.

Signed-off-by: Thomas VanSelus <[email protected]>
Signed-off-by: Aaron Sierra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: ds1682: Show device registers as unsigned

This patch leverages the fact that all DS1682 registers are unsigned to
merge two return paths into one. It also introduces val_le as used in
ds1682_s

misc: ds1682: Show device registers as unsigned

This patch leverages the fact that all DS1682 registers are unsigned to
merge two return paths into one. It also introduces val_le as used in
ds1682_store() to merge two endianness conversions into one.

Signed-off-by: Aaron Sierra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

MISC: add const to bin_attribute structures

Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file. The arguments passed are of
type const, so

MISC: add const to bin_attribute structures

Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.

Done using Coccinelle.

@m disable optional_qualifier@
identifier s;
position p;
@@
static struct bin_attribute s@p={...};

@okay1@
position p;
identifier m.s;
@@
(
sysfs_create_bin_file(...,&s@p,...)
|
sysfs_remove_bin_file(...,&s@p,...)
)

@bad@
position p!={m.p,okay1.p};
identifier m.s;
@@
s@p

@change depends on !bad disable optional_qualifier@
identifier m.s;
@@
static
+const
struct bin_attribute s={...};

Signed-off-by: Bhumika Goyal <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: ds1682: Add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device re

misc: ds1682: Add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: ds1682: clean up ds1682_eeprom_read() and ds1682_eeprom_write()

The change removes redundant sysfs binary file boundary checks, since
this task is already done on caller side in fs/sysfs/file.

misc: ds1682: clean up ds1682_eeprom_read() and ds1682_eeprom_write()

The change removes redundant sysfs binary file boundary checks, since
this task is already done on caller side in fs/sysfs/file.c

Signed-off-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

misc: (ds1682) replace obsolete simple_strtoull() with kstrtoull()

simple_strtoull() is obsolete, use the newer kstrtoull() instead.

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfa

misc: (ds1682) replace obsolete simple_strtoull() with kstrtoull()

simple_strtoull() is obsolete, use the newer kstrtoull() instead.

Signed-off-by: Sebastien Bourdelin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers/misc: delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just

drivers/misc: delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Paul Gortmaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

MISC: convert drivers/misc/* to use module_i2c_driver()

This patch converts the drivers in drivers/misc/* to use the
module_i2c_driver() macro which makes the code smaller and a bit
simpler.

Signed

MISC: convert drivers/misc/* to use module_i2c_driver()

This patch converts the drivers in drivers/misc/* to use the
module_i2c_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <[email protected]>
Cc: Michael Hennerich <[email protected]>
Cc: Anantha Narayanan <[email protected]>
Cc: Hemanth V <[email protected]>
Cc: Christoph Mair <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Ben Gardner <[email protected]>
Cc: Minkyu Kang <[email protected]>
Cc: Kalhan Trisal <[email protected]>
Cc: Darrick J. Wong <[email protected]>
Cc: Daniel Mack <[email protected]>
Cc: Rodolfo Giometti <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sysfs: add struct file* to bin_attr callbacks

This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: C

sysfs: add struct file* to bin_attr callbacks

This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <[email protected]>
Guess-its-ok-by: Christoph Lameter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lee Schermerhorn <[email protected]>

show more ...

i2c/chips: Move ds1682 to drivers/misc

As i2c/chips is deprecated, move ds1682 to a more apropriate location.
Build tested.

Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Grant Likel

i2c/chips: Move ds1682 to drivers/misc

As i2c/chips is deprecated, move ds1682 to a more apropriate location.
Build tested.

Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Grant Likely <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>

show more ...