treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mfd: Remove DEFINE_PCI_DEVICE_TABLE macro

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.

Signed-off-by: Jingoo Han <[email protected]>
Signed-off-by: Lee Jones <lee

mfd: Remove DEFINE_PCI_DEVICE_TABLE macro

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.

Signed-off-by: Jingoo Han <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: Constify struct mfd_cell where possible

As of commit 03e361b25ee8dfb1fd9b890072c23c4aae01c6c7 ("mfd: Stop setting
refcounting pointers in original mfd_cell arrays"), the "cell" parameter of
mfd

mfd: Constify struct mfd_cell where possible

As of commit 03e361b25ee8dfb1fd9b890072c23c4aae01c6c7 ("mfd: Stop setting
refcounting pointers in original mfd_cell arrays"), the "cell" parameter of
mfd_add_devices() is "const" again. Hence make all cell data passed to
mfd_add_devices() const where possible.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: remove use of __devexit

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <[email protected]>
Cc: Srinidhi Kasagar <srinidhi.kasagar@st

mfd: remove use of __devexit

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <[email protected]>
Cc: Srinidhi Kasagar <[email protected]>
Cc: Peter Tyser <[email protected]>
Cc: Daniel Walker <[email protected]>
Cc: Bryan Huntsman <[email protected]>
Acked-by: David Brown <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mfd: remove use of __devinit

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Cc: Srinidhi Kasagar <srinidhi.kasagar@st

mfd: remove use of __devinit

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Cc: Srinidhi Kasagar <[email protected]>
Cc: Peter Tyser <[email protected]>
Cc: Daniel Walker <[email protected]>
Cc: Bryan Huntsman <[email protected]>
Acked-by: David Brown <[email protected]>
Acked-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mfd: remove use of __devexit_p

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Cc: Srinidhi Kasagar <srinidhi.kasaga

mfd: remove use of __devexit_p

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Cc: Srinidhi Kasagar <[email protected]>
Cc: Peter Tyser <[email protected]>
Cc: Daniel Walker <[email protected]>
Cc: Bryan Huntsman <[email protected]>
Acked-by: David Brown <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mfd: core: Push irqdomain mapping out into devices

Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and on

mfd: core: Push irqdomain mapping out into devices

Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and only if the device tree bindings use the pattern of registering IPs
in the device tree with compatible properties. This will be actively
harmful for drivers which support non-DT platforms and use this pattern
for their DT bindings as it will mean that the core will silently change
remapping behaviour and it is also limiting for drivers which don't do
DT with this particular pattern. There is also a potential fragility if
there are interrupts not associated with MFD cells and all the cells are
omitted from the device tree for some reason.

Instead change the code to take an IRQ domain as an optional argument,
allowing drivers to take the decision about the parent domain for their
interrupts. The one current user of this feature is ab8500-core, it has
the domain lookup pushed out into the driver.

Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

mfd: core: Push irqdomain mapping out into devices

Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and on

mfd: core: Push irqdomain mapping out into devices

Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and only if the device tree bindings use the pattern of registering IPs
in the device tree with compatible properties. This will be actively
harmful for drivers which support non-DT platforms and use this pattern
for their DT bindings as it will mean that the core will silently change
remapping behaviour and it is also limiting for drivers which don't do
DT with this particular pattern. There is also a potential fragility if
there are interrupts not associated with MFD cells and all the cells are
omitted from the device tree for some reason.

Instead change the code to take an IRQ domain as an optional argument,
allowing drivers to take the decision about the parent domain for their
interrupts. The one current user of this feature is ab8500-core, it has
the domain lookup pushed out into the driver.

Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

mfd: Use module_pci_driver

This patch converts the drivers in drivers/mfd/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.

mfd: Use module_pci_driver

This patch converts the drivers in drivers/mfd/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <[email protected]>
Cc: Andres Salomon <[email protected]>
Cc: Ira W. Snyder <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Denis Turischev <[email protected]>
Cc: Harald Welte <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

mfd: Convert to DEFINE_PCI_DEVICE_TABLE

Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables.

Cc: Andres Salomon <[email protected]>
Cc: Denis Turischev <denis@compula

mfd: Convert to DEFINE_PCI_DEVICE_TABLE

Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables.

Cc: Andres Salomon <[email protected]>
Cc: Denis Turischev <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Vincent Sanders <[email protected]>
Cc: Mocean Laboratories <[email protected]>
Cc: Harald Welte <[email protected]>
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

mfd: Add MODULE_DEVICE_TABLE to vx855

The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entries will be added to
modules.pcimap:
vx855

mfd: Add MODULE_DEVICE_TABLE to vx855

The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entries will be added to
modules.pcimap:
vx855 0x00001106 0x00008409 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0

Signed-off-by: Axel Lin <[email protected]>
Acked-by: Harald Welte <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

mfd: Add __devexit annotation for vx855_remove

Signed-off-by: Axel Lin <[email protected]>
Acked-by: Harald Welte <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

mfd: Add VIA VX855 multi-function device support

This device has GPIO, SPI and I2C capabilities.

The hardware can be found in the OLPC XO-1.5 laptop.

Based on earlier work by Harald Welte.

Signed

mfd: Add VIA VX855 multi-function device support

This device has GPIO, SPI and I2C capabilities.

The hardware can be found in the OLPC XO-1.5 laptop.

Based on earlier work by Harald Welte.

Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...