mfd: sec: Add support for S2MPU05 PMIC

Add support for Samsung's S2MPU05 PMIC. It's the primary PMIC used by
Exynos7870 devices. It houses regulators (21 LDOs and 5 BUCKs) and a RTC
clock device.

S

mfd: sec: Add support for S2MPU05 PMIC

Add support for Samsung's S2MPU05 PMIC. It's the primary PMIC used by
Exynos7870 devices. It houses regulators (21 LDOs and 5 BUCKs) and a RTC
clock device.

Signed-off-by: Kaustabh Chakraborty <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-2-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Add support for the Samsung s2dos05

S2DOS05 is a panel/touchscreen PMIC, often found in
Samsung phones. We define regulator sub-device for which driver will
be added in subsequent pat

mfd: sec-core: Add support for the Samsung s2dos05

S2DOS05 is a panel/touchscreen PMIC, often found in
Samsung phones. We define regulator sub-device for which driver will
be added in subsequent patch. The device also has ADC for power and
current measurements.

Signed-off-by: Dzmitry Sankouski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240617-starqltechn_integration_upstream-v5-2-ea1109029ba5@gmail.com
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that mer

mfd: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i

mfd: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Remove PMICs without compatibles

The S5M8751 and S5M8763 PMIC chips have no corresponding compatible
values, so since board file support was removed for this driver, there
is no way to spe

mfd: sec: Remove PMICs without compatibles

The S5M8751 and S5M8763 PMIC chips have no corresponding compatible
values, so since board file support was removed for this driver, there
is no way to specify these PMICs as present in boards anymore.
Remove leftovers of these chips since it's dead code.

Signed-off-by: David Virag <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

mfd: sec: Remove #ifdef guards for PM related functions

Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros
to handle the .suspend/.resume callbacks.

These macros allow the suspend and

mfd: sec: Remove #ifdef guards for PM related functions

Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros
to handle the .suspend/.resume callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@

mfd: sec-core: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

mfd: sec: Enable wakeup from suspend via devicetree property

Set device wakeup capability from devicetree property (done by drivers
core), instead of always setting it to 0 (because value in platfor

mfd: sec: Enable wakeup from suspend via devicetree property

Set device wakeup capability from devicetree property (done by drivers
core), instead of always setting it to 0 (because value in platform data
is not assigned).

This should not have visible effect on actual resuming from suspend
because the child device - S5M RTC driver - is responsible for waking
up and sets device wakeup unconditionally.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Remove unused irq_base in platform data

The 'irq_base' field of platform data structure is not assigned,
therefore its default value of 0 has no impact and can be safely
dropped.

Signed-o

mfd: sec: Remove unused irq_base in platform data

The 'irq_base' field of platform data structure is not assigned,
therefore its default value of 0 has no impact and can be safely
dropped.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Remove unused device_type in platform data

The 'device_type' field of platform data structure is not used and can
be safely dropped.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowsk

mfd: sec: Remove unused device_type in platform data

The 'device_type' field of platform data structure is not used and can
be safely dropped.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Remove unused cfg_pmic_irq in platform data

The 'cfg_pmic_irq' field of platform data structure is not used and can
be safely dropped.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlow

mfd: sec: Remove unused cfg_pmic_irq in platform data

The 'cfg_pmic_irq' field of platform data structure is not used and can
be safely dropped.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Drop support for board files and require devicetree

The Samsung PMIC drivers since long time are used only on devicetree
platforms (Samsung Exynos) and there are no users with board files.

mfd: sec: Drop support for board files and require devicetree

The Samsung PMIC drivers since long time are used only on devicetree
platforms (Samsung Exynos) and there are no users with board files.

Drop the support for board files entirely and depend on OF for matching.

Suggested-by: Marek Szyprowski <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Simplify getting of_device_id match data

Use of_device_get_match_data() to make the code slightly smaller. There
is also no need to wrap it in a check for CONFIG_OF, because dev.of_node
w

mfd: sec: Simplify getting of_device_id match data

Use of_device_get_match_data() to make the code slightly smaller. There
is also no need to wrap it in a check for CONFIG_OF, because dev.of_node
will be set only with OF support.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Initialize driver via module_platform_driver()

The driver was using subsys_initcall() because in old times deferred
probe was not supported everywhere and specific ordering was needed.
Sin

mfd: sec: Initialize driver via module_platform_driver()

The driver was using subsys_initcall() because in old times deferred
probe was not supported everywhere and specific ordering was needed.
Since probe deferral works fine and specific ordering is discouraged
(hides dependencies between drivers and couples their boot order), the
driver can be converted to regular module_platform_driver.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Add support for the RTC on S2MPA01

The RTC portion of the S2MPA01 appears to have the same
register layout as the S2MPS14.

Signed-off-by: Stuart Menefy <[email protected]>
Re

mfd: sec: Add support for the RTC on S2MPA01

The RTC portion of the S2MPA01 appears to have the same
register layout as the S2MPS14.

Signed-off-by: Stuart Menefy <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Put one element structure initialisation on one line

Change the layout of the initialisation of structures with one
element to a single line of code. This keeps the coding style
consistent

mfd: sec: Put one element structure initialisation on one line

Change the layout of the initialisation of structures with one
element to a single line of code. This keeps the coding style
consistent.

Signed-off-by: Stuart Menefy <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Cleanup formatting to a consistent style

Cleanup the formatting to have consistent style across the file (only
white-space issues). No expected difference in code.

Signed-off-by: Kr

mfd: sec-core: Cleanup formatting to a consistent style

Cleanup the formatting to have consistent style across the file (only
white-space issues). No expected difference in code.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Return gracefully instead of BUG() if device cannot match

Replace impossible BUG() in probe with a proper return. This can be
triggered only in case of a clear bug (e.g. adding broke

mfd: sec-core: Return gracefully instead of BUG() if device cannot match

Replace impossible BUG() in probe with a proper return. This can be
triggered only in case of a clear bug (e.g. adding broken half-support
for new S2MPSXX flavor) but BUG() is discouraged and the boot process
can actually try to continue.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Add SPDX license identifiers

Replace GPL v2.0+ license statements with SPDX license identifiers.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <lee.jo

mfd: sec-core: Add SPDX license identifiers

Replace GPL v2.0+ license statements with SPDX license identifiers.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Export OF module alias table

In case of Device Tree platforms, even though the Samsung PMIC sec
device is instantiated from DT, the driver is still matched through I2C
module alias.

mfd: sec-core: Export OF module alias table

In case of Device Tree platforms, even though the Samsung PMIC sec
device is instantiated from DT, the driver is still matched through I2C
module alias. That is because I2C core always reports an I2C module
alias instead of DT one.

This could change in the future so export DT module alias.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip

Use devm_mfd_add_devices() for adding MFD child devices and
devm_regmap_add_irq_chip() for IRQ chip registration.

This reduces the er

mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip

Use devm_mfd_add_devices() for adding MFD child devices and
devm_regmap_add_irq_chip() for IRQ chip registration.

This reduces the error code path and .remove callback for removing
MFD child devices and deleting IRQ chip data.

Signed-off-by: Laxman Dewangan <[email protected]>
Tested-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: Use to_i2c_client() instead of open-coding it

Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

mfd: sec-core: Rename MFD and regulator names differently

Currently S2MPSXX multifunction device is named as *-pmic,
and these MFDs also supports regulator as a one of its MFD cell which
has the sam

mfd: sec-core: Rename MFD and regulator names differently

Currently S2MPSXX multifunction device is named as *-pmic,
and these MFDs also supports regulator as a one of its MFD cell which
has the same name, because current name is confusing and we want to
sort it out.

We did discussed different approaches about how the MFD and it
cells need to be named here [1].
Based in the discussion this patch rename MFD regulator name as
*-regulator instead of current *-pmic.

This patch also changes the corresponding entries in the regulator driver
to keep git-bisect happy.

[1]-> https://lkml.org/lkml/2015/10/28/417

Suggested-by: Lee Jones <[email protected]>
Signed-off-by: Alim Akhtar <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Mark Brown <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec: Add support for S2MPS15 PMIC

Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
clock outp

mfd: sec: Add support for S2MPS15 PMIC

Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
clock outputs and battery charger. This patch adds initial support for
LDO and buck regulators of S2MPS15 device.

Signed-off-by: Thomas Abraham <[email protected]>
Signed-off-by: Alim Akhtar <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
[Alim: Added s2mps15_devs like rtc and clk and related changes]
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children

The commit 54e8827d5f0e ("mfd: sec-core: Add support for S2MPU02
device") added new MFD child devices for S2MPU02: RTC and clock
pro

mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children

The commit 54e8827d5f0e ("mfd: sec-core: Add support for S2MPU02
device") added new MFD child devices for S2MPU02: RTC and clock
provider (the clock provider with new compatible). However support for
these devices was not added to existing drivers (rtc-s5m, clk-s2mps11).
New drivers were not submitted neither.

This means that the name of children devices is completely unused. The
"samsung,s2mpu02-clk" compatible remains undocumented so it is unclear
what is provided by that compatible.

Clean up this by removing unused child devices and undocumented
compatible.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chanwoo Choi <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...