media: atmel: atmel-isc: move to staging

The Atmel ISC driver is not compliant with media controller specification.
In order to evolve this driver, it has to move to media controller, to
support enh

media: atmel: atmel-isc: move to staging

The Atmel ISC driver is not compliant with media controller specification.
In order to evolve this driver, it has to move to media controller, to
support enhanced features and future products which embed it.
The move to media controller involves several changes which are
not backwards compatible with the current usability of the driver.

The best example is the way the format is propagated from the top video
driver /dev/videoX down to the sensor.

In a simple configuration sensor ==> isc , the isc just calls subdev s_fmt
and controls the sensor directly. This is achieved by having a lot of code
inside the driver that will query the subdev at probe time and make a list
of formats which are usable.
Basically the user has nothing to configure, as the isc will handle
everything at the top level. This is an easy way to capture, but also comes
with the drawback of lack of flexibility.
In a more complicated pipeline
sensor ==> controller 1 ==> controller 2 ==> isc
this will not be achievable, as controller 1 and controller 2 might be
media-controller configurable, and will not propagate the formats down to
the sensor.

After discussions with the media maintainers, the decision is to move
Atmel ISC to staging as-is, to keep the Kconfig symbols and the users
to the driver in staging. Thus, all the existing users of the non
media-controller paradigm will continue to be happy and use the old config
way.

The new driver was added in the media subsystem with a different
symbol, with the conversion to media controller done, and new users
of the driver will be able to use all the new features.

This patch is merely a file move to staging, not affecting any of the
users.

The exported symbols had to be renamed to atmel_* to avoid duplication with
the new Microchip ISC driver.

Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atmel: move microchip_csi2dc to dedicated microchip platform

The Atmel ISC will be moved to staging thus the atmel platform will only
have the ISI driver.
The new media-controller converted I

media: atmel: move microchip_csi2dc to dedicated microchip platform

The Atmel ISC will be moved to staging thus the atmel platform will only
have the ISI driver.
The new media-controller converted ISC driver will be placed inside a
dedicated microchip platform directory.
It is then natural to have the microchip-csi2dc moved to this new platform
directory.
The next step is to add the Microchip ISC driver to the new platform
directory and reside together with the Microchip CSI2DC driver.

Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atmel: atmel-isc: move to staging

The Atmel ISC driver is not compliant with media controller specification.
In order to evolve this driver, it has to move to media controller, to
support enh

media: atmel: atmel-isc: move to staging

The Atmel ISC driver is not compliant with media controller specification.
In order to evolve this driver, it has to move to media controller, to
support enhanced features and future products which embed it.
The move to media controller involves several changes which are
not backwards compatible with the current usability of the driver.

The best example is the way the format is propagated from the top video
driver /dev/videoX down to the sensor.

In a simple configuration sensor ==> isc , the isc just calls subdev s_fmt
and controls the sensor directly. This is achieved by having a lot of code
inside the driver that will query the subdev at probe time and make a list
of formats which are usable.
Basically the user has nothing to configure, as the isc will handle
everything at the top level. This is an easy way to capture, but also comes
with the drawback of lack of flexibility.
In a more complicated pipeline
sensor ==> controller 1 ==> controller 2 ==> isc
this will not be achievable, as controller 1 and controller 2 might be
media-controller configurable, and will not propagate the formats down to
the sensor.

After discussions with the media maintainers, the decision is to move
Atmel ISC to staging as-is, to keep the Kconfig symbols and the users
to the driver in staging. Thus, all the existing users of the non
media-controller paradigm will continue to be happy and use the old config
way.

The new driver was added in the media subsystem with a different
symbol, with the conversion to media controller done, and new users
of the driver will be able to use all the new features.

This patch is merely a file move to staging, not affecting any of the
users.

The exported symbols had to be renamed to atmel_* to avoid duplication with
the new Microchip ISC driver.

Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>

show more ...

media: atmel: move microchip_csi2dc to dedicated microchip platform

The Atmel ISC will be moved to staging thus the atmel platform will only
have the ISI driver.
The new media-controller converted I

media: atmel: move microchip_csi2dc to dedicated microchip platform

The Atmel ISC will be moved to staging thus the atmel platform will only
have the ISI driver.
The new media-controller converted ISC driver will be placed inside a
dedicated microchip platform directory.
It is then natural to have the microchip-csi2dc moved to this new platform
directory.
The next step is to add the Microchip ISC driver to the new platform
directory and reside together with the Microchip CSI2DC driver.

Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>

show more ...

media: atmel: atmel-isc: split the clock code into separate source file

The atmel-isc-base is getting crowded. Split the clock functions into
atmel-isc-clk.c.

Signed-off-by: Eugen Hristev <eugen.hr

media: atmel: atmel-isc: split the clock code into separate source file

The atmel-isc-base is getting crowded. Split the clock functions into
atmel-isc-clk.c.

Signed-off-by: Eugen Hristev <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atmel: introduce microchip csi2dc driver

Microchip CSI2DC (CSI2 Demultiplexer Controller) is a misc bridge device
that converts a byte stream in IDI Synopsys format (coming from a CSI2HOST)
t

media: atmel: introduce microchip csi2dc driver

Microchip CSI2DC (CSI2 Demultiplexer Controller) is a misc bridge device
that converts a byte stream in IDI Synopsys format (coming from a CSI2HOST)
to a pixel stream that can be captured by a sensor controller.

Signed-off-by: Eugen Hristev <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atmel: fix build when ISC=m and XISC=y

Building VIDEO_ATMEL_ISC as module and VIDEO_ATMEL_XISC as built-in
(or viceversa) causes build errors:

or1k-linux-ld: drivers/media/platform/atmel/at

media: atmel: fix build when ISC=m and XISC=y

Building VIDEO_ATMEL_ISC as module and VIDEO_ATMEL_XISC as built-in
(or viceversa) causes build errors:

or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o: in function `isc_async_complete':
atmel-isc-base.c:(.text+0x40d0): undefined reference to `__this_module'
or1k-linux-ld: atmel-isc-base.c:(.text+0x40f0): undefined reference to `__this_module'
or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(.rodata+0x390): undefined reference to `__this_module'
or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x4): undefined reference to `__this_module'
or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x18): undefined reference to `__this_module'

This is caused by the file atmel-isc-base.c which is common code between
the two drivers.

The solution is to create another Kconfig symbol that is automatically
selected and generates the module atmel-isc-base.ko. This module can be
loaded when both drivers are modules, or built-in when at least one of them
is built-in.

Reported-by: kernel test robot <[email protected]>
Fixes: c9aa973884a1 ("media: atmel: atmel-isc: add microchip-xisc driver")
Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atmel: atmel-isc: add microchip-xisc driver

Add driver for the extended variant of the isc, the microchip XISC
present on sama7g5 product.

[hverkuil: drop MODULE_SUPPORTED_DEVICE, no longer

media: atmel: atmel-isc: add microchip-xisc driver

Add driver for the extended variant of the isc, the microchip XISC
present on sama7g5 product.

[hverkuil: drop MODULE_SUPPORTED_DEVICE, no longer exists]
[hverkuil: made isc_sama7g5_config_csc et al static]
[hverkuil: made sama7g5_controller_formats et al static]

Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atmel: atmel-isc: split driver into driver base and isc

This splits the Atmel ISC driver into a common base: atmel-isc-base.c
and the driver probe/dt part , atmel-sama5d2-isc.c
This is needed

media: atmel: atmel-isc: split driver into driver base and isc

This splits the Atmel ISC driver into a common base: atmel-isc-base.c
and the driver probe/dt part , atmel-sama5d2-isc.c
This is needed to keep a common ground for the sensor controller which will
be reused.
The atmel-isc will use the common symbols inside the atmel-isc-base
Future driver will also use the same symbols and redefine different aspects,
for a different version of the ISC.
This is done to avoid complete code duplication by creating a totally
different driver for the new variant of the ISC.

Signed-off-by: Eugen Hristev <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[[email protected]: folded 'atmel: atmel-sama5d2-isc: fixed checkpatch warnings' into this patch]
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

[media] atmel-isi: move out of soc_camera to atmel

Move this out of the soc_camera directory into the atmel directory
where it belongs.

Signed-off-by: Hans Verkuil <[email protected]>
Acked-by

[media] atmel-isi: move out of soc_camera to atmel

Move this out of the soc_camera directory into the atmel directory
where it belongs.

Signed-off-by: Hans Verkuil <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

[media] atmel-isc: add the Image Sensor Controller code

Add driver for the Image Sensor Controller. It manages
incoming data from a parallel based CMOS/CCD sensor.
It has an internal image processor

[media] atmel-isc: add the Image Sensor Controller code

Add driver for the Image Sensor Controller. It manages
incoming data from a parallel based CMOS/CCD sensor.
It has an internal image processor, also integrates a
triple channel direct memory access controller master
interface.

Signed-off-by: Songjun Wu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...