media: intel/ipu6: Fix direct dependency Kconfig error

VIDEO_INTEL_IPU6 selects IPU6_BRIDGE, but they have different set of
dependencies.

It fixes this warning:
WARNING: unmet direct dependencies d

media: intel/ipu6: Fix direct dependency Kconfig error

VIDEO_INTEL_IPU6 selects IPU6_BRIDGE, but they have different set of
dependencies.

It fixes this warning:
WARNING: unmet direct dependencies detected for IPU_BRIDGE
Depends on [n]: MEDIA_SUPPORT [=y] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && I2C [=y] && ACPI [=n]
Selected by [y]:
- VIDEO_INTEL_IPU6 [=y] && MEDIA_SUPPORT [=y] && PCI [=y] && MEDIA_PCI_SUPPORT [=y] && (ACPI [=n] || COMPILE_TEST [=y]) && VIDEO_DEV [=y] && X86 [=y] && X86_64 [=y] && HAS_DMA [=y]

Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: intel/ipu6: add Kconfig and Makefile

Add Kconfig and Makefile for the IPU6 driver.

Signed-off-by: Bingbu Cao <[email protected]>
Signed-off-by: Andreas Helbech Kleist <andreaskleist@gmail

media: intel/ipu6: add Kconfig and Makefile

Add Kconfig and Makefile for the IPU6 driver.

Signed-off-by: Bingbu Cao <[email protected]>
Signed-off-by: Andreas Helbech Kleist <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>

show more ...

media: ipu-bridge: Fix Kconfig dependencies

The current Kconfig symbol dependencies allow having the following Kconfig
symbol values

CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRID

media: ipu-bridge: Fix Kconfig dependencies

The current Kconfig symbol dependencies allow having the following Kconfig
symbol values

CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=n

This does not work as the IPU bridge API is conditional to
IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so
that CONFIG_IPU_BRIDGE can be separately selected.

The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is
removed.

Fixes: 2545a2c02ba1 ("media: ipu3-cio2: allow ipu_bridge to be a module again")
Suggested-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>

show more ...

media: pci: intel: ivsc: Add CSI submodule

CSI is a submodule of IVSC which can route camera sensor data
to the outbound MIPI CSI-2 interface.

The interface communicating with firmware is via MEI.

media: pci: intel: ivsc: Add CSI submodule

CSI is a submodule of IVSC which can route camera sensor data
to the outbound MIPI CSI-2 interface.

The interface communicating with firmware is via MEI. There is
a separate MEI UUID, which this driver uses to enumerate.

To route camera sensor data to host, the information of link
frequency and number of data lanes is sent to firmware by
sending MEI command when starting stream.

CSI also provides a privacy mode. When privacy mode is turned
on, camera sensor can't be used. This means that both IVSC and
host Image Processing Unit(IPU) can't get image data. And when
this mode is turned on, user is notified via v4l2 control
callback.

Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Wentong Wu <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: ipu3-cio2: allow ipu_bridge to be a module again

This code was previously part of the VIDEO_IPU3_CIO2 driver, which could
be built-in or a loadable module, but after the move it turned into a

media: ipu3-cio2: allow ipu_bridge to be a module again

This code was previously part of the VIDEO_IPU3_CIO2 driver, which could
be built-in or a loadable module, but after the move it turned into a
builtin-only driver. This fails to link when the I2C subsystem is a
module:

x86_64-linux-ld: drivers/media/pci/intel/ipu-bridge.o: in function `ipu_bridge_unregister_sensors':
ipu-bridge.c:(.text+0x50): undefined reference to `i2c_unregister_device'
x86_64-linux-ld: drivers/media/pci/intel/ipu-bridge.o: in function `ipu_bridge_init':
ipu-bridge.c:(.text+0x9c9): undefined reference to `i2c_acpi_new_device_by_fwnode'

In general, drivers should not have to be built-in, so change the option
to a tristate with the corresponding dependency. This in turn opens a
new problem with the dependency, as the IPU bridge can be a loadable module
while the ipu3 driver itself is built-in, producing a new link failure:

86_64-linux-ld: drivers/media/pci/intel/ipu3/ipu3-cio2.o: in function `cio2_pci_probe':
ipu3-cio2.c:(.text+0x197e): undefined reference to `ipu_bridge_init'

In order to fix this, restore the old Kconfig option that controlled
the ipu bridge driver before it was split out, but make it select a
hidden symbol that now corresponds to the bridge driver.

When other drivers get added that share ipu-bridge, this should cover
all corner cases, and allow any combination of them to be built-in
or modular.

Link: https://lore.kernel.org/linux-media/[email protected]

Fixes: 881ca25978c6 ("media: ipu3-cio2: rename cio2 bridge to ipu bridge and move out of ipu3")'
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: ipu3-cio2: rename cio2 bridge to ipu bridge and move out of ipu3

cio2 bridge was involved along with IPU3. However, in fact all Intel IPUs
besides IPU3 CIO2 need this bridge driver. This patc

media: ipu3-cio2: rename cio2 bridge to ipu bridge and move out of ipu3

cio2 bridge was involved along with IPU3. However, in fact all Intel IPUs
besides IPU3 CIO2 need this bridge driver. This patch move bridge driver
out of ipu3 directory and rename as ipu-bridge. Then it can be worked with
IPU3 and other Intel IPUs.

Signed-off-by: Bingbu Cao <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...