|
Revision tags: v6.15, v6.15-rc7, v6.15-rc6, v6.15-rc5, v6.15-rc4, v6.15-rc3, v6.15-rc2, v6.15-rc1, v6.14, v6.14-rc7, v6.14-rc6, v6.14-rc5, v6.14-rc4, v6.14-rc3, v6.14-rc2, v6.14-rc1, v6.13, v6.13-rc7, v6.13-rc6, v6.13-rc5, v6.13-rc4 |
|
| #
8fc38062 |
| 16-Dec-2024 |
Thomas Zimmermann <[email protected]> |
fbdev: Fix recursive dependencies wrt BACKLIGHT_CLASS_DEVICE
Do not select BACKLIGHT_CLASS_DEVICE from FB_BACKLIGHT. The latter only controls backlight support within fbdev core code and data struct
fbdev: Fix recursive dependencies wrt BACKLIGHT_CLASS_DEVICE
Do not select BACKLIGHT_CLASS_DEVICE from FB_BACKLIGHT. The latter only controls backlight support within fbdev core code and data structures.
Make fbdev drivers depend on BACKLIGHT_CLASS_DEVICE and let users select it explicitly. Fixes warnings about recursive dependencies, such as
error: recursive dependency detected! symbol BACKLIGHT_CLASS_DEVICE is selected by FB_BACKLIGHT symbol FB_BACKLIGHT is selected by FB_SH_MOBILE_LCDC symbol FB_SH_MOBILE_LCDC depends on FB_DEVICE symbol FB_DEVICE depends on FB_CORE symbol FB_CORE is selected by DRM_GEM_DMA_HELPER symbol DRM_GEM_DMA_HELPER is selected by DRM_PANEL_ILITEK_ILI9341 symbol DRM_PANEL_ILITEK_ILI9341 depends on BACKLIGHT_CLASS_DEVICE
BACKLIGHT_CLASS_DEVICE is user-selectable, so making drivers adapt to it is the correct approach in any case. For most drivers, backlight support is also configurable separately.
v3: - Select BACKLIGHT_CLASS_DEVICE in PowerMac defconfigs (Christophe) - Fix PMAC_BACKLIGHT module dependency corner cases (Christophe) v2: - s/BACKLIGHT_DEVICE_CLASS/BACKLIGHT_CLASS_DEVICE (Helge) - Fix fbdev driver-dependency corner case (Arnd)
Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
show more ...
|
|
Revision tags: v6.13-rc3, v6.13-rc2, v6.13-rc1, v6.12, v6.12-rc7, v6.12-rc6, v6.12-rc5, v6.12-rc4, v6.12-rc3, v6.12-rc2, v6.12-rc1, v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3, v6.11-rc2, v6.11-rc1, v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2, v6.10-rc1, v6.9 |
|
| #
bc8744c6 |
| 07-May-2024 |
Michael Ellerman <[email protected]> |
macintosh/ams: Fix unused variable warning
If both CONFIG_SENSORS_AMS_PMU and CONFIG_SENSORS_AMS_I2C are unset, there is an unused variable warning in the ams driver:
drivers/macintosh/ams/ams-co
macintosh/ams: Fix unused variable warning
If both CONFIG_SENSORS_AMS_PMU and CONFIG_SENSORS_AMS_I2C are unset, there is an unused variable warning in the ams driver:
drivers/macintosh/ams/ams-core.c: In function 'ams_init': drivers/macintosh/ams/ams-core.c:181:29: warning: unused variable 'np' 181 | struct device_node *np;
The driver needs at least one of the configs enabled in order to actually function. So fix the compiler warning by ensuring at least one of the configs is enabled.
Suggested-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
show more ...
|
|
Revision tags: v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1, v6.8, v6.8-rc7, v6.8-rc6, v6.8-rc5, v6.8-rc4, v6.8-rc3, v6.8-rc2, v6.8-rc1, v6.7, v6.7-rc8, v6.7-rc7, v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1 |
|
| #
05dce4ba |
| 23-Feb-2023 |
Randy Dunlap <[email protected]> |
macintosh: via-pmu-led: requires ATA to be set
LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK when ATA is not set/enabled causes a Kconfig warning:
WARNING: unmet direct dependenc
macintosh: via-pmu-led: requires ATA to be set
LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK when ATA is not set/enabled causes a Kconfig warning:
WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n] Selected by [y]: - ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y]
Fix this by making ADB_PMU_LED_DISK depend on ATA.
Seen on both PPC32 and PPC64.
Fixes: 0e865a80c135 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
show more ...
|
|
Revision tags: v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5, v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2 |
|
| #
9a9c5ff5 |
| 10-Apr-2022 |
Randy Dunlap <[email protected]> |
macintosh: via-pmu and via-cuda need RTC_LIB
Fix build when RTC_LIB is not set/enabled. Eliminates these build errors:
m68k-linux-ld: drivers/macintosh/via-pmu.o: in function `pmu_set_rtc_time': dr
macintosh: via-pmu and via-cuda need RTC_LIB
Fix build when RTC_LIB is not set/enabled. Eliminates these build errors:
m68k-linux-ld: drivers/macintosh/via-pmu.o: in function `pmu_set_rtc_time': drivers/macintosh/via-pmu.c:1769: undefined reference to `rtc_tm_to_time64' m68k-linux-ld: drivers/macintosh/via-cuda.o: in function `cuda_set_rtc_time': drivers/macintosh/via-cuda.c:797: undefined reference to `rtc_tm_to_time64'
Fixes: 0792a2c8e0bb ("macintosh: Use common code to access RTC") Reported-by: kernel test robot <[email protected]> Suggested-by: Christophe Leroy <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
show more ...
|
| #
86ce436e |
| 07-Apr-2022 |
Finn Thain <[email protected]> |
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event': via-pmu-event.c:(.text+0x44): undefined reference to `input_event'
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event': via-pmu-event.c:(.text+0x44): undefined reference to `input_event' via-pmu-event.c:(.text+0x68): undefined reference to `input_event' via-pmu-event.c:(.text+0x94): undefined reference to `input_event' via-pmu-event.c:(.text+0xb8): undefined reference to `input_event' drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init': via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device' via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device' via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device' make[1]: *** [Makefile:1155: vmlinux] Error 1 make: *** [Makefile:350: __build_one_by_one] Error 2
Don't call into the input subsystem unless CONFIG_INPUT is built-in.
Reported-by: kernel test robot <[email protected]> Signed-off-by: Finn Thain <[email protected]> Tested-by: Randy Dunlap <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/5edbe76ce68227f71e09af4614cc4c1bd61c7ec8.1649326292.git.fthain@linux-m68k.org
show more ...
|
|
Revision tags: v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1, v5.10, v5.10-rc7, v5.10-rc6, v5.10-rc5, v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6, v5.9-rc5, v5.9-rc4, v5.9-rc3, v5.9-rc2, v5.9-rc1, v5.8, v5.8-rc7, v5.8-rc6, v5.8-rc5, v5.8-rc4, v5.8-rc3, v5.8-rc2, v5.8-rc1 |
|
| #
a7f7f624 |
| 13-Jun-2020 |
Masahiro Yamada <[email protected]> |
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasi
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines, I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <[email protected]>
show more ...
|
|
Revision tags: v5.7, v5.7-rc7, v5.7-rc6, v5.7-rc5, v5.7-rc4, v5.7-rc3, v5.7-rc2, v5.7-rc1, v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5, v5.6-rc4, v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7, v5.5-rc6, v5.5-rc5, v5.5-rc4, v5.5-rc3, v5.5-rc2, v5.5-rc1, v5.4, v5.4-rc8, v5.4-rc7, v5.4-rc6, v5.4-rc5, v5.4-rc4, v5.4-rc3, v5.4-rc2 |
|
| #
0c444d98 |
| 02-Oct-2019 |
Dmitry Torokhov <[email protected]> |
macintosh/ams-input: switch to using input device polling mode
Now that instances of input_dev support polling mode natively, we no longer need to create input_polled_dev instance.
Signed-off-by: D
macintosh/ams-input: switch to using input device polling mode
Now that instances of input_dev support polling mode natively, we no longer need to create input_polled_dev instance.
Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/20191002214854.GA114387@dtor-ws
show more ...
|
| #
25dd118f |
| 20-Nov-2019 |
Krzysztof Kozlowski <[email protected]> |
macintosh: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzyszt
macintosh: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
show more ...
|
|
Revision tags: v5.4-rc1, v5.3, v5.3-rc8, v5.3-rc7, v5.3-rc6, v5.3-rc5, v5.3-rc4, v5.3-rc3, v5.3-rc2, v5.3-rc1, v5.2, v5.2-rc7, v5.2-rc6, v5.2-rc5, v5.2-rc4, v5.2-rc3, v5.2-rc2, v5.2-rc1 |
|
| #
ec8f24b7 |
| 19-May-2019 |
Thomas Gleixner <[email protected]> |
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project
treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v5.1, v5.1-rc7, v5.1-rc6, v5.1-rc5, v5.1-rc4, v5.1-rc3, v5.1-rc2, v5.1-rc1, v5.0, v5.0-rc8, v5.0-rc7, v5.0-rc6, v5.0-rc5, v5.0-rc4, v5.0-rc3, v5.0-rc2, v5.0-rc1, v4.20, v4.20-rc7, v4.20-rc6, v4.20-rc5, v4.20-rc4, v4.20-rc3, v4.20-rc2, v4.20-rc1, v4.19, v4.19-rc8, v4.19-rc7, v4.19-rc6, v4.19-rc5, v4.19-rc4, v4.19-rc3, v4.19-rc2, v4.19-rc1, v4.18, v4.18-rc8, v4.18-rc7, v4.18-rc6, v4.18-rc5, v4.18-rc4 |
|
| #
ebd72227 |
| 02-Jul-2018 |
Finn Thain <[email protected]> |
macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver
Now that the PowerMac via-pmu driver supports m68k PowerBooks, switch over to that driver and remove the via-pmu68k driver.
Tested-b
macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver
Now that the PowerMac via-pmu driver supports m68k PowerBooks, switch over to that driver and remove the via-pmu68k driver.
Tested-by: Stan Johnson <[email protected]> Signed-off-by: Finn Thain <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
show more ...
|
| #
c2f028b6 |
| 02-Jul-2018 |
Finn Thain <[email protected]> |
macintosh/via-pmu: Explicitly specify CONFIG_PPC_PMAC dependencies
At present, CONFIG_ADB_PMU depends on CONFIG_PPC_PMAC. When this gets relaxed to CONFIG_PPC_PMAC || CONFIG_MAC, those Kconfig symbo
macintosh/via-pmu: Explicitly specify CONFIG_PPC_PMAC dependencies
At present, CONFIG_ADB_PMU depends on CONFIG_PPC_PMAC. When this gets relaxed to CONFIG_PPC_PMAC || CONFIG_MAC, those Kconfig symbols with implicit deps on PPC_PMAC will need explicit deps. Add them now. No functional change.
Tested-by: Stan Johnson <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
show more ...
|
| #
c16a85a5 |
| 02-Jul-2018 |
Finn Thain <[email protected]> |
macintosh/via-pmu: Add support for m68k PowerBooks
Put #ifdefs around the Open Firmware, xmon, interrupt dispatch, battery and suspend code. Add the necessary interrupt handling to support m68k Powe
macintosh/via-pmu: Add support for m68k PowerBooks
Put #ifdefs around the Open Firmware, xmon, interrupt dispatch, battery and suspend code. Add the necessary interrupt handling to support m68k PowerBooks.
The pmu_kind value is available to userspace using the PMU_IOC_GET_MODEL ioctl. It is not clear yet what hardware classes are be needed to describe m68k PowerBook models, so pmu_kind is given the provisional value PMU_UNKNOWN.
To find out about the hardware, user programs can use /proc/bootinfo or /proc/hardware, or send the PMU_GET_VERSION command using /dev/adb.
Tested-by: Stan Johnson <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
show more ...
|
|
Revision tags: v4.18-rc3, v4.18-rc2, v4.18-rc1, v4.17, v4.17-rc7, v4.17-rc6, v4.17-rc5, v4.17-rc4, v4.17-rc3, v4.17-rc2, v4.17-rc1, v4.16, v4.16-rc7, v4.16-rc6, v4.16-rc5, v4.16-rc4, v4.16-rc3, v4.16-rc2, v4.16-rc1, v4.15, v4.15-rc9, v4.15-rc8, v4.15-rc7, v4.15-rc6, v4.15-rc5, v4.15-rc4, v4.15-rc3, v4.15-rc2, v4.15-rc1, v4.14, v4.14-rc8, v4.14-rc7, v4.14-rc6, v4.14-rc5, v4.14-rc4, v4.14-rc3, v4.14-rc2, v4.14-rc1, v4.13, v4.13-rc7, v4.13-rc6, v4.13-rc5, v4.13-rc4, v4.13-rc3, v4.13-rc2, v4.13-rc1, v4.12, v4.12-rc7, v4.12-rc6, v4.12-rc5, v4.12-rc4, v4.12-rc3, v4.12-rc2, v4.12-rc1, v4.11, v4.11-rc8, v4.11-rc7, v4.11-rc6, v4.11-rc5, v4.11-rc4, v4.11-rc3, v4.11-rc2, v4.11-rc1, v4.10, v4.10-rc8, v4.10-rc7, v4.10-rc6, v4.10-rc5, v4.10-rc4, v4.10-rc3, v4.10-rc2 |
|
| #
f74faec6 |
| 01-Jan-2017 |
Finn Thain <[email protected]> |
m68k/mac: Replace via-maciisi driver with via-cuda driver
Change the device probe test in the via-cuda.c driver so it will load on Egret-based machines too. Remove the now redundant via-maciisi.c dr
m68k/mac: Replace via-maciisi driver with via-cuda driver
Change the device probe test in the via-cuda.c driver so it will load on Egret-based machines too. Remove the now redundant via-maciisi.c driver.
Tested-by: Stan Johnson <[email protected]> Signed-off-by: Finn Thain <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
show more ...
|
|
Revision tags: v4.10-rc1, v4.9, v4.9-rc8, v4.9-rc7, v4.9-rc6, v4.9-rc5, v4.9-rc4, v4.9-rc3, v4.9-rc2, v4.9-rc1, v4.8, v4.8-rc8, v4.8-rc7 |
|
| #
0e865a80 |
| 18-Sep-2016 |
Elimar Riesebieter <[email protected]> |
macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected
We can use the front led of powerbooks/ibooks to visualize disk activity without the deprecated IDE_GD_ATA.
Signed-off-by:
macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected
We can use the front led of powerbooks/ibooks to visualize disk activity without the deprecated IDE_GD_ATA.
Signed-off-by: Elimar Riesebieter <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
show more ...
|
|
Revision tags: v4.8-rc6, v4.8-rc5, v4.8-rc4, v4.8-rc3, v4.8-rc2, v4.8-rc1, v4.7, v4.7-rc7, v4.7-rc6, v4.7-rc5, v4.7-rc4, v4.7-rc3 |
|
| #
83e2c70e |
| 10-Jun-2016 |
Stephan Linz <[email protected]> |
powerpc: use the new LED disk activity trigger
- dts: rename 'ide-disk' to 'disk-activity' - defconfig: rename 'ADB_PMU_LED_IDE' to 'ADB_PMU_LED_DISK'
Cc: Joseph Jezak <[email protected]> Cc: Jörg
powerpc: use the new LED disk activity trigger
- dts: rename 'ide-disk' to 'disk-activity' - defconfig: rename 'ADB_PMU_LED_IDE' to 'ADB_PMU_LED_DISK'
Cc: Joseph Jezak <[email protected]> Cc: Jörg Sommer <[email protected]> Signed-off-by: Stephan Linz <[email protected]> Signed-off-by: Jacek Anaszewski <[email protected]>
show more ...
|
|
Revision tags: v4.7-rc2, v4.7-rc1, v4.6, v4.6-rc7, v4.6-rc6, v4.6-rc5, v4.6-rc4, v4.6-rc3, v4.6-rc2, v4.6-rc1, v4.5, v4.5-rc7, v4.5-rc6, v4.5-rc5, v4.5-rc4, v4.5-rc3, v4.5-rc2, v4.5-rc1, v4.4, v4.4-rc8, v4.4-rc7, v4.4-rc6, v4.4-rc5, v4.4-rc4, v4.4-rc3, v4.4-rc2, v4.4-rc1, v4.3, v4.3-rc7, v4.3-rc6, v4.3-rc5, v4.3-rc4 |
|
| #
f27b86dc |
| 01-Oct-2015 |
Aaro Koskinen <[email protected]> |
drivers/macintosh: adb: fix misleading Kconfig help text
CONFIG_INPUT_KEYBDEV does not exist and no additional keyboard-specific options are needed to get the keyboard working.
Signed-off-by: Aaro
drivers/macintosh: adb: fix misleading Kconfig help text
CONFIG_INPUT_KEYBDEV does not exist and no additional keyboard-specific options are needed to get the keyboard working.
Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
show more ...
|
|
Revision tags: v4.3-rc3, v4.3-rc2, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4 |
|
| #
b074cf80 |
| 05-Nov-2014 |
Wolfram Sang <[email protected]> |
macintosh: therm_pm72: delete deprecated driver
The new driver is around for more than 2 years now, so the old one can go. Getting rid of it helps the removal of the legacy .attach_adapter callback
macintosh: therm_pm72: delete deprecated driver
The new driver is around for more than 2 years now, so the old one can go. Getting rid of it helps the removal of the legacy .attach_adapter callback of the I2C subsystem.
Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]>
show more ...
|
|
Revision tags: v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3 |
|
| #
6cf30b35 |
| 24-May-2013 |
Geert Uytterhoeven <[email protected]> |
m68k/mac: Mark Mac IIsi ADB driver BROKEN
As reported by Finn Thain, the Mac IIsi ADB driver should be disabled because it will crash.
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
| #
de00b30d |
| 30-Oct-2013 |
Christian Kujau <[email protected]> |
powerpc/pmu: Fix ADB_PMU_LED_IDE dependencies
for quite some time the following is printed (twice) after doing "make oldconfig":
[...] scripts/kconfig/conf --oldconfig Kconfig warning: (ADB_PMU_LED
powerpc/pmu: Fix ADB_PMU_LED_IDE dependencies
for quite some time the following is printed (twice) after doing "make oldconfig":
[...] scripts/kconfig/conf --oldconfig Kconfig warning: (ADB_PMU_LED_IDE) selects LEDS_TRIGGER_IDE_DISK which has unmet direct dependencies (NEW_LEDS && IDE_GD_ATA && LEDS_TRIGGERS) warning: (ADB_PMU_LED_IDE) selects LEDS_TRIGGER_IDE_DISK which has unmet direct dependencies (NEW_LEDS && IDE_GD_ATA && LEDS_TRIGGERS)
The following patch causes ADB_PMU_LED to depend on IDE_GD_ATA, so that the options above are only available when IDE_GD_ATA is actually selected and thus eliminates the warning.
Signed-off-by: Christian Kujau <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
show more ...
|
|
Revision tags: v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4 |
|
| #
80ec2135 |
| 17-Jan-2013 |
Kees Cook <[email protected]> |
drivers/macintosh: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during th
drivers/macintosh: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5 |
|
| #
6cd32099 |
| 29-Apr-2012 |
Benjamin Herrenschmidt <[email protected]> |
powerpc/powermac: New windfarm driver for PowerMac G5 (AGP) and Xserve G5
This replaces the old therm_pm72 using the same windfarm infrastructure that was used for other PowerMac G5 models. The fan
powerpc/powermac: New windfarm driver for PowerMac G5 (AGP) and Xserve G5
This replaces the old therm_pm72 using the same windfarm infrastructure that was used for other PowerMac G5 models. The fan speeds and sensors should now be visible in the same location in sysfs.
The driver is split into separate core modules for PowerMac7,2 (and 7,3) and RackMac3,1, with a lot of the shared code now in the separate sensor and control modules.
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
show more ...
|
|
Revision tags: v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5 |
|
| #
0bae35e1 |
| 02-Dec-2010 |
Johannes Berg <[email protected]> |
leds: fix up dependencies
It's not useful to build LED triggers when there's no LEDs that can be triggered by them. Therefore, fix up the dependencies so that this cannot happen, and fix a few user
leds: fix up dependencies
It's not useful to build LED triggers when there's no LEDs that can be triggered by them. Therefore, fix up the dependencies so that this cannot happen, and fix a few users that select triggers to depend on LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS, which is OK).
Signed-off-by: Johannes Berg <[email protected]> Reported-by: Randy Dunlap <[email protected]> Acked-by: Randy Dunlap <[email protected]> Tested-by: Ingo Molnar <[email protected]> Cc: Arnd Hannemann <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
show more ...
|
|
Revision tags: v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1 |
|
| #
bd5f47ec |
| 28-Oct-2010 |
Jean Delvare <[email protected]> |
Move ams driver to macintosh
The ams driver isn't a hardware monitoring driver, so it shouldn't live under driver/hwmon. drivers/macintosh seems much more appropriate, as the driver is only useful o
Move ams driver to macintosh
The ams driver isn't a hardware monitoring driver, so it shouldn't live under driver/hwmon. drivers/macintosh seems much more appropriate, as the driver is only useful on PowerBooks and iBooks.
Signed-off-by: Jean Delvare <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Stelian Pop <[email protected]> Cc: Michael Hanselmann <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Grant Likely <[email protected]>
show more ...
|
|
Revision tags: v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7 |
|
| #
429722e1 |
| 30-Jan-2010 |
Dmitry Torokhov <[email protected]> |
Input: Mac button emulation - allow compiling as a module
Not all systems require Mac-style button emulation, however distributions enable it by default so it is readily available. Allow compiling
Input: Mac button emulation - allow compiling as a module
Not all systems require Mac-style button emulation, however distributions enable it by default so it is readily available. Allow compiling it as a module so it can be loaded only on systems that actually require it.
Signed-off-by: Dmitry Torokhov <[email protected]>
show more ...
|
| #
99b089c3 |
| 30-Jan-2010 |
Dmitry Torokhov <[email protected]> |
Input: Mac button emulation - implement as an input filter
Current implementation of Mac mouse button emulation plugs into legacy keyboard driver, converts certain keys into button events on a separ
Input: Mac button emulation - implement as an input filter
Current implementation of Mac mouse button emulation plugs into legacy keyboard driver, converts certain keys into button events on a separate device, and suppresses the real events from reaching tty. This worked well enough until user space started using evdev which was completely unaware of this arrangement and kept sending original key presses to its users. Change the implementation to use newly added input filter framework so that original key presses are not transmitted to any handlers.
As a bonus remove SYSCTL dependencies from the code and use Kconfig instead; also do not create the emulated mouse device until user activates emulation.
Signed-off-by: Dmitry Torokhov <[email protected]>
show more ...
|