leds: triggers: Flush pending brightness before activating trigger

The race fixed in timer_trig_activate() between a blocking
set_brightness() call and trigger->activate() can affect any trigger.
So

leds: triggers: Flush pending brightness before activating trigger

The race fixed in timer_trig_activate() between a blocking
set_brightness() call and trigger->activate() can affect any trigger.
So move the call to flush_work() into led_trigger_set() where it can
avoid the race for all triggers.

Fixes: 0db37915d912 ("leds: avoid races with workqueue")
Fixes: 8c0f693c6eff ("leds: avoid flush_work in atomic context")
Cc: [email protected]
Tested-by: Dustin L. Howett <[email protected]>
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

leds: trigger: remove redundant assignment to variable ret

The variable ret is being assigned with a value that is never read
and it is being updated later with a new value. The initialization is
re

leds: trigger: remove redundant assignment to variable ret

The variable ret is being assigned with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Pavel Machek <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Enrico Weigelt <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

leds: avoid flush_work in atomic context

It turns out that various triggers use led_blink_setup() from atomic
context, so we can't do a flush_work there. Flush is still needed for
slow LEDs, but we

leds: avoid flush_work in atomic context

It turns out that various triggers use led_blink_setup() from atomic
context, so we can't do a flush_work there. Flush is still needed for
slow LEDs, but we can move it to sysfs code where it is safe.

WARNING: inconsistent lock state
5.2.0-rc1 #1 Tainted: G W
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
000000006e30541b
((work_completion)(&led_cdev->set_brightness_work)){+.?.}, at:
+__flush_work+0x3b/0x38a
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x146/0x1a1
__flush_work+0x5b/0x38a
flush_work+0xb/0xd
led_blink_setup+0x1e/0xd3
led_blink_set+0x3f/0x44
tpt_trig_timer+0xdb/0x106
ieee80211_mod_tpt_led_trig+0xed/0x112

Fixes: 0db37915d912 ("leds: avoid races with workqueue")
Signed-off-by: Pavel Machek <[email protected]>
Tested-by: Hugh Dickins <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>

show more ...

leds: avoid flush_work in atomic context

It turns out that various triggers use led_blink_setup() from atomic
context, so we can't do a flush_work there. Flush is still needed for
slow LEDs, but we

leds: avoid flush_work in atomic context

It turns out that various triggers use led_blink_setup() from atomic
context, so we can't do a flush_work there. Flush is still needed for
slow LEDs, but we can move it to sysfs code where it is safe.

WARNING: inconsistent lock state
5.2.0-rc1 #1 Tainted: G W
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
000000006e30541b
((work_completion)(&led_cdev->set_brightness_work)){+.?.}, at:
+__flush_work+0x3b/0x38a
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x146/0x1a1
__flush_work+0x5b/0x38a
flush_work+0xb/0xd
led_blink_setup+0x1e/0xd3
led_blink_set+0x3f/0x44
tpt_trig_timer+0xdb/0x106
ieee80211_mod_tpt_led_trig+0xed/0x112

Fixes: 0db37915d912 ("leds: avoid races with workqueue")
Signed-off-by: Pavel Machek <[email protected]>
Tested-by: Hugh Dickins <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>

show more ...

leds: trigger: timer: Add initialization from Device Tree

Allow initialization of delays used in timer trigger from Device
Tree property.

This is especially useful for embedded systems where the tr

leds: trigger: timer: Add initialization from Device Tree

Allow initialization of delays used in timer trigger from Device
Tree property.

This is especially useful for embedded systems where the trigger might
be used early, before bringing up user-space.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>

show more ...

leds: timer trigger: simplifications from core changes

The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
cons

leds: timer trigger: simplifications from core changes

The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .trigger_data being non-NULL can go away.

Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>

show more ...

leds: triggers: let struct led_trigger::activate() return an error code

Given that activating a trigger can fail, let the callback return an
indication. This prevents to have a trigger active accord

leds: triggers: let struct led_trigger::activate() return an error code

Given that activating a trigger can fail, let the callback return an
indication. This prevents to have a trigger active according to the
"trigger" sysfs attribute but not functional.

All users are changed accordingly to return 0 for now. There is no intended
change in behaviour.

Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>

show more ...

leds: triggers: make the MODULE_LICENSE string match the actual license

These files are licensed under GPL version 2 only. So use "GPL v2"
instead of "GPL" (which means v2 or later).

Also remove an

leds: triggers: make the MODULE_LICENSE string match the actual license

These files are licensed under GPL version 2 only. So use "GPL v2"
instead of "GPL" (which means v2 or later).

Also remove an empty (but commented) line at the end of the license
header which nicely proves in the context that the drivers are really v2
only :-)

Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>

show more ...

leds: move LED trigger drivers into new subdirectory

For better driver management, new subdirectory, 'trigger' is created.
All LED trigger drivers are moved into this directory.

Internal header, 'l

leds: move LED trigger drivers into new subdirectory

For better driver management, new subdirectory, 'trigger' is created.
All LED trigger drivers are moved into this directory.

Internal header, 'leds.h' is included in each LED trigger drivers.
Fix the location of header file, "leds.h" -> "../leds.h" in driver files.
One exception is here, 'ledtrig-timer.c'.
There is no need to include 'leds.h'. so '#include "leds.h"' line was removed.

Signed-off-by: Milo(Woogyom) Kim <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>

show more ...