move asm/unaligned.h to linux/unaligned.h

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-

move asm/unaligned.h to linux/unaligned.h

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

show more ...

Input: elantech - fix touchpad state on resume for Lenovo N24

The Lenovo N24 on resume becomes stuck in a state where it
sends incorrect packets, causing elantech_packet_check_v4 to fail.
The only w

Input: elantech - fix touchpad state on resume for Lenovo N24

The Lenovo N24 on resume becomes stuck in a state where it
sends incorrect packets, causing elantech_packet_check_v4 to fail.
The only way for the device to resume sending the correct packets is for
it to be disabled and then re-enabled.

This change adds a dmi check to trigger this behavior on resume.

Signed-off-by: Jonathan Denose <[email protected]>
Link: https://lore.kernel.org/r/20240503155020.v2.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: psmouse - fix fast_reconnect function for PS/2 mode

When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initial

Input: psmouse - fix fast_reconnect function for PS/2 mode

When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.

The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.

Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.

Reported-by: Thorsten Leemhuis <[email protected]>
Tested-by: Thorsten Leemhuis <[email protected]>
Signed-off-by: Jeffery Miller <[email protected]>
Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: psmouse - fix OOB access in Elantech protocol

The kernel only allocate 5 MT slots; check that transmitted slot ID
falls within the acceptable range.

Link: https://lore.kernel.org/r/ZFnEL91nr

Input: psmouse - fix OOB access in Elantech protocol

The kernel only allocate 5 MT slots; check that transmitted slot ID
falls within the acceptable range.

Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - fix stack out of bound access in elantech_change_report_id()

The array param[] in elantech_change_report_id() must be at least 3
bytes, because elantech_read_reg_params() is callin

Input: elantech - fix stack out of bound access in elantech_change_report_id()

The array param[] in elantech_change_report_id() must be at least 3
bytes, because elantech_read_reg_params() is calling ps2_command() with
PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but
it's defined in the stack as an array of 2 bytes, therefore we have a
potential stack out-of-bounds access here, also confirmed by KASAN:

[ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0
[ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118

[ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110
[ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020
[ 6.512436] Workqueue: events_long serio_handle_event
[ 6.512453] Call Trace:
[ 6.512462] show_stack+0x52/0x58
[ 6.512474] dump_stack+0xa1/0xd3
[ 6.512487] print_address_description.constprop.0+0x1d/0x140
[ 6.512502] ? __ps2_command+0x372/0x7e0
[ 6.512516] __kasan_report.cold+0x7d/0x112
[ 6.512527] ? _raw_write_lock_irq+0x20/0xd0
[ 6.512539] ? __ps2_command+0x372/0x7e0
[ 6.512552] kasan_report+0x3c/0x50
[ 6.512564] __asan_load1+0x6a/0x70
[ 6.512575] __ps2_command+0x372/0x7e0
[ 6.512589] ? ps2_drain+0x240/0x240
[ 6.512601] ? dev_printk_emit+0xa2/0xd3
[ 6.512612] ? dev_vprintk_emit+0xc5/0xc5
[ 6.512621] ? __kasan_check_write+0x14/0x20
[ 6.512634] ? mutex_lock+0x8f/0xe0
[ 6.512643] ? __mutex_lock_slowpath+0x20/0x20
[ 6.512655] ps2_command+0x52/0x90
[ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse]
[ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse]
[ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse]
[ 6.512863] ? ps2_command+0x7f/0x90
[ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse]
[ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse]
[ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse]
[ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse]
[ 6.513122] ? phys_pmd_init+0x30e/0x521
[ 6.513137] elantech_init+0x8a/0x200 [psmouse]
[ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse]
[ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse]
[ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse]
[ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse]
[ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse]
[ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse]
[ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse]
[ 6.513519] ? mutex_unlock+0x22/0x40
[ 6.513526] ? ps2_command+0x7f/0x90
[ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse]
[ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse]
[ 6.513624] psmouse_connect+0x272/0x530 [psmouse]
[ 6.513669] serio_driver_probe+0x55/0x70
[ 6.513679] really_probe+0x190/0x720
[ 6.513689] driver_probe_device+0x160/0x1f0
[ 6.513697] device_driver_attach+0x119/0x130
[ 6.513705] ? device_driver_attach+0x130/0x130
[ 6.513713] __driver_attach+0xe7/0x1a0
[ 6.513720] ? device_driver_attach+0x130/0x130
[ 6.513728] bus_for_each_dev+0xfb/0x150
[ 6.513738] ? subsys_dev_iter_exit+0x10/0x10
[ 6.513748] ? _raw_write_unlock_bh+0x30/0x30
[ 6.513757] driver_attach+0x2d/0x40
[ 6.513764] serio_handle_event+0x199/0x3d0
[ 6.513775] process_one_work+0x471/0x740
[ 6.513785] worker_thread+0x2d2/0x790
[ 6.513794] ? process_one_work+0x740/0x740
[ 6.513802] kthread+0x1b4/0x1e0
[ 6.513809] ? set_kthread_struct+0x80/0x80
[ 6.513816] ret_from_fork+0x22/0x30

[ 6.513832] The buggy address belongs to the page:
[ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7
[ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 6.513860] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
[ 6.513867] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 6.513872] page dumped because: kasan: bad access detected

[ 6.513879] addr ffff8881024d77c2 is located in stack of task kworker/2:1/118 at offset 34 in frame:
[ 6.513887] elantech_change_report_id+0x0/0x256 [psmouse]

[ 6.513941] this frame has 1 object:
[ 6.513947] [32, 34) 'param'

[ 6.513956] Memory state around the buggy address:
[ 6.513962] ffff8881024d7680: f2 f2 f2 f2 f2 00 00 f3 f3 00 00 00 00 00 00 00
[ 6.513969] ffff8881024d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6.513976] >ffff8881024d7780: 00 00 00 00 f1 f1 f1 f1 02 f3 f3 f3 00 00 00 00
[ 6.513982] ^
[ 6.513988] ffff8881024d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6.513995] ffff8881024d7880: 00 f1 f1 f1 f1 03 f2 03 f2 03 f3 f3 f3 00 00 00
[ 6.514000] ==================================================================

Define param[] in elantech_change_report_id() as an array of 3 bytes to
prevent the out-of-bounds access in the stack.

Fixes: e4c9062717fe ("Input: elantech - fix protocol errors for some trackpoints in SMBus mode")
BugLink: https://bugs.launchpad.net/bugs/1945590
Signed-off-by: Andrea Righi <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantench - fix misreporting trackpoint coordinates

Some firmwares occasionally report bogus data from trackpoint, with X or Y
displacement being too large (outside of [-127, 127] range). Let

Input: elantench - fix misreporting trackpoint coordinates

Some firmwares occasionally report bogus data from trackpoint, with X or Y
displacement being too large (outside of [-127, 127] range). Let's drop such
packets so that we do not generate jumps.

Signed-off-by: Phoenix Huang <[email protected]>
Tested-by: Yufei Du <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - Prepare a complete software node for the device

Creating a software node and supplying that for the device
instead of only the device properties in it. A software
node was always c

Input: elantech - Prepare a complete software node for the device

Creating a software node and supplying that for the device
instead of only the device properties in it. A software
node was always created in any case to hold the additional
device properties, so this change does not have any real
effect.

This change makes it possible to remove support for the
problematic "dangling" device properties from i2c subsystem,
i.e. the "properties" member from struct i2c_board_info. The
problems caused by them are not related to this driver.

Signed-off-by: Heikki Krogerus <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

show more ...

Input: elantech - fix protocol errors for some trackpoints in SMBus mode

There are some version of Elan trackpads that send incorrect data when
in SMbus mode, unless they are switched to use 0x5f re

Input: elantech - fix protocol errors for some trackpoints in SMBus mode

There are some version of Elan trackpads that send incorrect data when
in SMbus mode, unless they are switched to use 0x5f reports instead of
standard 0x5e. This patch implements querying device to retrieve chips
identifying data, and switching it, when needed to the alternative
report.

Signed-off-by: Jingle Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - demote obvious abuse of kernel-doc header

Fixes the following W=1 kernel build warning(s):

drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'psmouse' no

Input: elantech - demote obvious abuse of kernel-doc header

Fixes the following W=1 kernel build warning(s):

drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'psmouse' not described in 'elantech_setup_smbus'
drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'info' not described in 'elantech_setup_smbus'
drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'leave_breadcrumbs' not described in 'elantech_setup_smbus'

Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markin

Input: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedor
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - remove redundant assignments to variable error

The variable error is being initialized with a value that is
never read and it is being updated later with a new value. The
initializ

Input: elantech - remove redundant assignments to variable error

The variable error is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Revert "Input: elantech - enable SMBus on new (2018+) systems"

This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c.

Apparently use dmi_get_bios_year() as manufacturing date isn't accurate

Revert "Input: elantech - enable SMBus on new (2018+) systems"

This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c.

Apparently use dmi_get_bios_year() as manufacturing date isn't accurate
and this breaks older laptops with new BIOS update.

So let's revert this patch.

There are still new HP laptops still need to use SMBus to support all
features, but it'll be enabled via a whitelist.

Signed-off-by: Kai-Heng Feng <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - annotate fall-through case in elantech_use_host_notify()

This avoids a warning when building with -Wimplicit-fallthrough.

Fixes: 883a2a80f79c ("Input: elantech - enable SMBus on n

Input: elantech - annotate fall-through case in elantech_use_host_notify()

This avoids a warning when building with -Wimplicit-fallthrough.

Fixes: 883a2a80f79c ("Input: elantech - enable SMBus on new (2018+) systems")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - enable SMBus on new (2018+) systems

There are some new HP laptops with Elantech touchpad that don't support
multitouch.

Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if

Input: elantech - enable SMBus on new (2018+) systems

There are some new HP laptops with Elantech touchpad that don't support
multitouch.

Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported,
but in addition to firmware version, the bus type also informs us whether the IC
can support SMBus. To avoid breaking old ICs, we will only enable SMbus support
based the bus type on systems manufactured after 2018.

Lastly, let's consolidate all checks into elantech_use_host_notify() and use it
to determine whether to use PS/2 or SMBus.

Signed-off-by: Kai-Heng Feng <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Enrico Weigelt <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

Input: elantech - remove P52 and P72 from SMBus blacklist

Both now works correctly over SMBus. Let's use this driver so we can
update all five fingers every 8ms.

Signed-off-by: Benjamin Tissoires <

Input: elantech - remove P52 and P72 from SMBus blacklist

Both now works correctly over SMBus. Let's use this driver so we can
update all five fingers every 8ms.

Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech/SMBus - export all capabilities from the PS/2 node

The recent touchpads might not have all the information regarding the
characteristics through the I2C port.
On some Lenovo t480s, t

Input: elantech/SMBus - export all capabilities from the PS/2 node

The recent touchpads might not have all the information regarding the
characteristics through the I2C port.
On some Lenovo t480s, this results in the touchpad not being detected
as a clickpad, and on the Lenovo P52, this results in a failure while
fetching the resolution through I2C.

We need to imitate the Windows behavior: fetch the data under PS/2, and
limit the querries under I2C.

This patch prepares this by exporting the info from PS/2.

Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - detect middle button based on firmware version

Looks like the new generation of Lenovo machine also need to
be added to the PnPID whitelist. This is definitively not going
to scale

Input: elantech - detect middle button based on firmware version

Looks like the new generation of Lenovo machine also need to
be added to the PnPID whitelist. This is definitively not going
to scale, as there is nothing that tells us currently if a
touchpad supports a true physical middle button.

Consider that all new touchpads that are not clickpads
(so matching ETP_NEW_IC_SMBUS_HOST_NOTIFY) are handling 3 physical
buttons.

Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - add helper function elantech_is_buttonpad()

We check for this bit all over the code, better have it defined once
for all.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@red

Input: elantech - add helper function elantech_is_buttonpad()

We check for this bit all over the code, better have it defined once
for all.

Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - query the min/max information beforehand too

For the latest generation of Elantech touchpads, we need to forward
the min/max information from PS/2 to SMBus. Prepare this work
by fe

Input: elantech - query the min/max information beforehand too

For the latest generation of Elantech touchpads, we need to forward
the min/max information from PS/2 to SMBus. Prepare this work
by fetching the information before creating the SMBus companion
device.

Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - enable middle button support on 2 ThinkPads

Adding 2 new touchpad PNPIDs to enable middle button support.

Signed-off-by: Aaron Ma <[email protected]>
Signed-off-by: Dmitry To

Input: elantech - enable middle button support on 2 ThinkPads

Adding 2 new touchpad PNPIDs to enable middle button support.

Signed-off-by: Aaron Ma <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780

Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech
touchpad, but the driver needs to be told so to enable the mi

Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780

Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech
touchpad, but the driver needs to be told so to enable the middle touchpad
button.

The elantech_dmi_force_crc_enabled quirk was not necessary with the H780.

Also document the fw_version and caps values detected for both H760 and
H780 models.

Signed-off-by: Matti Kurkela <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - disable elan-i2c for P52 and P72

The current implementation of elan_i2c is known to not support those
2 laptops.

A proper fix is to tweak both elantech and elan_i2c to transmit th

Input: elantech - disable elan-i2c for P52 and P72

The current implementation of elan_i2c is known to not support those
2 laptops.

A proper fix is to tweak both elantech and elan_i2c to transmit the
correct information from PS/2, which would make a bad candidate for
stable.

So to give us some time for fixing the root of the problem, disable
elan_i2c for the devices we know are not behaving properly.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600
Link: https://bugs.archlinux.org/task/59714
Fixes: df077237cf55 Input: elantech - detect new ICs and setup Host Notify for them

Cc: [email protected] # v4.18+
Signed-off-by: Benjamin Tissoires <[email protected]>
Acked-by: Peter Hutterer <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - enable middle button of touchpad on ThinkPad P72

Adding 2 new touchpad IDs to support middle button support.

Cc: [email protected]
Signed-off-by: Aaron Ma <aaron.ma@canonical

Input: elantech - enable middle button of touchpad on ThinkPad P72

Adding 2 new touchpad IDs to support middle button support.

Cc: [email protected]
Signed-off-by: Aaron Ma <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used: -Wimplicit-fallthrou

Input: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used: -Wimplicit-fallthrough=2

Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...