Revert "Input: Add driver for PixArt PS/2 touchpad"

This reverts commit 740ff03d7238214a318cdcfd96dec51832b053d2 because
current PixArt detection is too greedy and claims devices that are
not PixArt

Revert "Input: Add driver for PixArt PS/2 touchpad"

This reverts commit 740ff03d7238214a318cdcfd96dec51832b053d2 because
current PixArt detection is too greedy and claims devices that are
not PixArt.

Reported-by: Benjamin Tissoires <[email protected]>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2314756
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: Add driver for PixArt PS/2 touchpad

This patch introduces a driver for the PixArt PS/2 touchpad, which
supports both clickpad and touchpad types.

At the same time, we extended the single dat

Input: Add driver for PixArt PS/2 touchpad

This patch introduces a driver for the PixArt PS/2 touchpad, which
supports both clickpad and touchpad types.

At the same time, we extended the single data packet length to 16,
because according to the current PixArt hardware and FW design, we need
11 bytes/15 bytes to represent the complete three-finger/four-finger data.

Co-developed-by: Jon Xie <[email protected]>
Signed-off-by: Jon Xie <[email protected]>
Co-developed-by: Jay Lee <[email protected]>
Signed-off-by: Jay Lee <[email protected]>
Signed-off-by: Binbin Zhou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: navpoint - remove driver

This driver does not use the SPI core as it should, instead tampering
with the SSP registers manually. Refactoring the driver is almost
certainly not worth it as the

Input: navpoint - remove driver

This driver does not use the SPI core as it should, instead tampering
with the SSP registers manually. Refactoring the driver is almost
certainly not worth it as the hardware seems to have been designed for
and used only in the HP iPAQ hx4700 removed more than a year ago in
d6df7df7ae5a ("ARM: pxa: remove unused board files"), so let's remove
it.

Signed-off-by: Duje Mihanović <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

input: remove pxa930_trkball driver

The pxa930 SoC support is getting removed, and no upstream
board ever provided the trkball device that this driver
relies on.

Cc: Dmitry Torokhov <dmitry.torokho

input: remove pxa930_trkball driver

The pxa930 SoC support is getting removed, and no upstream
board ever provided the trkball device that this driver
relies on.

Cc: Dmitry Torokhov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: [email protected]
Acked-by: Robert Jarzmik <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

Input: vsxxxaa - fix Kconfig spelling mistake

There is a spelling mistake in the Kconfig help text. Fix it by replacing
"theses" with "these".

Signed-off-by: Colin Ian King <[email protected]

Input: vsxxxaa - fix Kconfig spelling mistake

There is a spelling mistake in the Kconfig help text. Fix it by replacing
"theses" with "these".

Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzysztof K

Input: fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: gpio_mouse - switch to using input device polling mode

Now that instances of input_dev support polling mode natively,
we no longer need to create input_polled_dev instance.

Acked-by: Hans-Ch

Input: gpio_mouse - switch to using input device polling mode

Now that instances of input_dev support polling mode natively,
we no longer need to create input_polled_dev instance.

Acked-by: Hans-Christian Noren Egtvedt <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

docs: Fix some broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix

Manually checked if the pro

docs: Fix some broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Acked-by: Mathieu Poirier <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Acked-by: Jonathan Corbet <[email protected]>

show more ...

Input: elantech - add support for SMBus devices

Many of the Elantech devices are connected through PS/2 and a different
bus (SMBus or plain I2C).

To not break any existing device, we only enable SM

Input: elantech - add support for SMBus devices

Many of the Elantech devices are connected through PS/2 and a different
bus (SMBus or plain I2C).

To not break any existing device, we only enable SMBus based
on a module parameter. If some laptops require the quirk to
be set, we will have to rely on a list of PNPIds or MDI matching
to individually expose those hardware over SMBus.
the parameter mentioned above is elantech_smbus from the psmouse
module.

Signed-off-by: Benjamin Tissoires <[email protected]>
Acked-by: KT Liao <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: synaptics - add support for Intertouch devices

Most of the Synaptics devices are connected through PS/2 and a different
bus (SMBus or HID over I2C). The secondary bus capability is indicated

Input: synaptics - add support for Intertouch devices

Most of the Synaptics devices are connected through PS/2 and a different
bus (SMBus or HID over I2C). The secondary bus capability is indicated by
the InterTouch bit in extended capability 0x0C.

We only enable the InterTouch device to be created for the laptops
registered with the top software button property or those we know that are
functional. In the future, we might change the default to always rely on
the InterTouch bus. Currently, users can enable/disable the feature with
the psmouse parameter synaptics_intertouch.

Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: psmouse - add support for SMBus companions

This provides glue between PS/2 devices that enumerate the RMI4 devices
and Elan touchpads to the RMI4 (or Elan) SMBus driver.

The SMBus devices ke

Input: psmouse - add support for SMBus companions

This provides glue between PS/2 devices that enumerate the RMI4 devices
and Elan touchpads to the RMI4 (or Elan) SMBus driver.

The SMBus devices keep their PS/2 connection alive. If the initialization
process goes too far (psmouse_activate called), the device disconnects
from the I2C bus and stays on the PS/2 bus, that is why we explicitly
disable PS/2 device reporting (by calling psmouse_deactivate) before
trying to register SMBus companion device.

The HID over I2C devices are enumerated through the ACPI DSDT, and
their PS/2 device also exports the InterTouch bit in the extended
capability 0x0C. However, the firmware keeps its I2C connection open
even after going further in the PS/2 initialization. We don't need
to take extra precautions with those device, especially because they
block their PS/2 communication when HID over I2C is used.

Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: byd - add BYD PS/2 touchpad driver

Driver for the BYD BTP10463 touchpad, found in PC Specialist `Lafite'
laptops. This patch sends the magic command sequence which causes the
touchpad to stre

Input: byd - add BYD PS/2 touchpad driver

Driver for the BYD BTP10463 touchpad, found in PC Specialist `Lafite'
laptops. This patch sends the magic command sequence which causes the
touchpad to stream intellimouse-style packets.

Gestures are detected inside the touchpad, and exposed as special
values in the Z component of each packet - absolute coordinates are
not supported, even in the Windows driver. At present, this supports
two-finger vertical and horizontal scrolling, and provides the
framework to expose the other gestures it can recognize.

Signed-off-by: Chris Diamand <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consum

Input: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: vmmouse - do not reference non-existing version of X driver

The vmmouse Kconfig help text was referring to an incorrect user-space
driver version. Fix this.

Signed-off-by: Thomas Hellstrom <

Input: vmmouse - do not reference non-existing version of X driver

The vmmouse Kconfig help text was referring to an incorrect user-space
driver version. Fix this.

Signed-off-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: add vmmouse driver

VMMouse enables low-latency mouse-cursor-movements for VMWare and QEMU
guests. By removing the guest cursor and using the host as a guest cursor
the cursor movement appear

Input: add vmmouse driver

VMMouse enables low-latency mouse-cursor-movements for VMWare and QEMU
guests. By removing the guest cursor and using the host as a guest cursor
the cursor movement appears instant although in reality there is some lag.
To be able to do this, the host's view of the cursor position must exactly
match the guest's view and an absolute pointer device is needed. Enter the
VMMouse. While the VMMouse driver has historically been an Xorg user-space
driver, implementing it as a kernel imput driver enables rootless Xorg and
new compositing display servers for VMware guests.

Signed-off-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: elantech - remove stale comment from Kconfig

The fixes to the X.org driver have been applied long time ago and
the patch on kernel.org has long since gone so let's remove the
comment.

Signed

Input: elantech - remove stale comment from Kconfig

The fixes to the X.org driver have been applied long time ago and
the patch on kernel.org has long since gone so let's remove the
comment.

Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: cyapa - add gen5 trackpad firmware update support

Add firmware image update support for gen5 trackpad device, it can be used
through sysfs update_fw interface.

Signed-off-by: Dudley Du <dudl

Input: cyapa - add gen5 trackpad firmware update support

Add firmware image update support for gen5 trackpad device, it can be used
through sysfs update_fw interface.

Signed-off-by: Dudley Du <[email protected]>
Tested-by: Jeremiah Mahler <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: psmouse - support for the FocalTech PS/2 protocol extensions

Most of the protocol for these touchpads has been reverse engineered. This
commit adds a basic multitouch-capable driver.

A lot o

Input: psmouse - support for the FocalTech PS/2 protocol extensions

Most of the protocol for these touchpads has been reverse engineered. This
commit adds a basic multitouch-capable driver.

A lot of the protocol is still unknown. Especially, we don't know how to
identify the device yet apart from the PNP ID.

The previous workaround for these devices has been left in place in case
the driver is not compiled into the kernel or in case some other device
with the same PNP ID is not recognized by the driver yet still has the same
problems with the device probing code.

Signed-off-by: Mathias Gottschlag <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: add driver for Elan I2C/SMbus touchpad

This driver supports Elan I2C/SMbus touchpads found in some laptops and
also in many Chromebooks.

Signed-off-by: Duson Lin <[email protected]>
Review

Input: add driver for Elan I2C/SMbus touchpad

This driver supports Elan I2C/SMbus touchpads found in some laptops and
also in many Chromebooks.

Signed-off-by: Duson Lin <[email protected]>
Reviewed-by: Benson Leung <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: logips2pp - fix typo in Kconfig help

s/Logictech/Logitech/

Signed-off-by: Daniele Forsi <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

Input: fix ps2/serio module dependency

The ps2 mouse and keyboard drivers use the "serio" framework that they
correctly select in Kconfig, and that in turn depends on the i8042 driver,
which is also

Input: fix ps2/serio module dependency

The ps2 mouse and keyboard drivers use the "serio" framework that they
correctly select in Kconfig, and that in turn depends on the i8042 driver,
which is also allowed to be disabled for architectures that don't have an
i8042.

However, Kconfig also allows i8042 to be built as a module while
the serio framework is built-in, which causes this link error:

drivers/built-in.o: In function `ps2_begin_command':
:(.text+0x26b6cc): undefined reference to `i8042_check_port_owner'
:(.text+0x26b6d4): undefined reference to `i8042_lock_chip'
drivers/built-in.o: In function `ps2_end_command':
:(.text+0x26b734): undefined reference to `i8042_check_port_owner'
:(.text+0x26b73c): undefined reference to `i8042_unlock_chip'

On x86, a specific 'select SERIO_I8042' takes care of it, but
not on the other architecture that potentially have a i8042.

This patch changes the Kconfig logic to ensure that whenever
there is an i8042, it does get used for the serio driver, avoiding
the link error above.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Convert selectors of GENERIC_GPIO to GPIOLIB

GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.

Signed-o

Convert selectors of GENERIC_GPIO to GPIOLIB

GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.

Signed-off-by: Alexandre Courbot <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Grant Likely <[email protected]>

show more ...

input: drop unnecessary dependencies on TTY

Backing out changes made in earlier TTY removal patch. Switched
to only one dependency in SERPORT on TTY instead of many incorrect
dependencies.

Signed-

input: drop unnecessary dependencies on TTY

Backing out changes made in earlier TTY removal patch. Switched
to only one dependency in SERPORT on TTY instead of many incorrect
dependencies.

Signed-off-by: Joe Millenbach <[email protected]>
Reported-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Added a CONFIG_TTY option to allow removal of TTY

The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-m

tty: Added a CONFIG_TTY option to allow removal of TTY

The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.

The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer. Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.

bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY. The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.

add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function old new delta
chr_dev_init 166 170 +4
allow_signal 80 82 +2
static.__warned 143 142 -1
disallow_signal 63 62 -1
__set_special_pids 95 94 -1
unregister_console 126 121 -5
start_kernel 546 541 -5
register_console 593 588 -5
copy_from_user 45 40 -5
sys_setsid 128 120 -8
sys_vhangup 32 19 -13
do_exit 1543 1526 -17
bitmap_zero 60 40 -20
arch_local_irq_save 137 117 -20
release_task 674 652 -22
static.spin_unlock_irqrestore 308 260 -48

Signed-off-by: Joe Millenbach <[email protected]>
Reviewed-by: Jamey Sharp <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...