Input: cobalt_btns - switch to using polled mode of input devices

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts cobalt_btns driver

Input: cobalt_btns - switch to using polled mode of input devices

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts cobalt_btns driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: cobalt_btns - convert to use managed resources

This simplifies error handling and allows to remove cobalt_buttons_remove()
method.

Link: https://lore.kernel.org/r/20191017204217.106453-12-dm

Input: cobalt_btns - convert to use managed resources

This simplifies error handling and allows to remove cobalt_buttons_remove()
method.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin street fifth floor boston ma 02110 1301 usa

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option [no]_[pad]_[ctrl] any later version this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin street fifth floor boston ma
02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 176 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Jilayne Lovejoy <[email protected]>
Reviewed-by: Steve Winslow <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

input: misc: drop owner assignment from platform_drivers

A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <[email protected]>

Input: delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left

Input: delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: cobalt_btns - remove redundant dev_set_drvdata

Driver core sets the data to NULL upon release or probe
failure. Hence explicit setting is not necessary.

Signed-off-by: Sachin Kamat <sachin.k

Input: cobalt_btns - remove redundant dev_set_drvdata

Driver core sets the data to NULL upon release or probe
failure. Hence explicit setting is not necessary.

Signed-off-by: Sachin Kamat <[email protected]>
Cc: Yoichi Yuasa <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: remove use of __devexit

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <[email protected]>
Acked-by: Mark Brown <broonie@opensourc

Input: remove use of __devexit

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <[email protected]>
Acked-by: Mark Brown <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: remove use of __devinit

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Acked-by: Mark Brown <broonie@opensourc

Input: remove use of __devinit

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: remove use of __devexit_p

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Acked-by: Russell King <rmk+kernel@

Input: remove use of __devexit_p

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <[email protected]>
Acked-by: Russell King <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: misc - use macro module_platform_driver()

Commit 940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to
save some platform_driver boilerplate code. Use it.

Signed-off-by: JJ Ding

Input: misc - use macro module_platform_driver()

Commit 940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to
save some platform_driver boilerplate code. Use it.

Signed-off-by: JJ Ding <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <[email protected]>
Guess-its-ok-by: Christoph Lameter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lee Schermerhorn <[email protected]>

show more ...

Input: use resource_size when allocating resources

Use the function resource_size, which reduces the chance of
introducing off-by-one errors in calculating the resource size.

The semantic patch tha

Input: use resource_size when allocating resources

Use the function resource_size, which reduces the chance of
introducing off-by-one errors in calculating the resource size.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct resource *res;
@@

- (res->end - res->start) + 1
+ resource_size(res)
// </smpl>

Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Update Yoichi Yuasa's e-mail address

Signed-off-by: Yoichi Yuasa <[email protected]>
Signed-off-by: Ralf Baechle <[email protected]>

Input: cobalt_btns - add missing MODULE_LICENSE

Export the module license and other information about the Cobalt
button module in order to avoid the following warning:

| WARNING: modpost: missing M

Input: cobalt_btns - add missing MODULE_LICENSE

Export the module license and other information about the Cobalt
button module in order to avoid the following warning:

| WARNING: modpost: missing MODULE_LICENSE() in drivers/input/misc/cobalt_btns.o

Signed-off-by: Martin Michlmayr <[email protected]>
Acked-by: Yoichi Yuasa <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: add MODULE_ALIAS() to hotpluggable platform modules

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias
is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable

Input: add MODULE_ALIAS() to hotpluggable platform modules

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias
is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable
"input" platform drivers, to re-enable auto loading.

[[email protected]: more drivers, registration fixes]
Signed-off-by: Kay Sievers <[email protected]>
Signed-off-by: David Brownell <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: cobalt_btns - assorted fixes

- fix compile errors (keymap is in bdev, not pdev)
- cdev is no more (must use dev.parent)
- update copiright notice

Signed-off-by: Yoichi Yuasa <yoichi_yuasa

Input: cobalt_btns - assorted fixes

- fix compile errors (keymap is in bdev, not pdev)
- cdev is no more (must use dev.parent)
- update copiright notice

Signed-off-by: Yoichi Yuasa <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: cobalt_btns - add support for loadable keymaps

Signed-off-by: Dmitry Torokhov <[email protected]>

get rid of input BIT* duplicate defines

get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT

get rid of input BIT* duplicate defines

get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <[email protected]>
Cc: <[email protected]>
Acked-by: Jiri Kosina <[email protected]>
Cc: <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Cc: <[email protected]>
Acked-by: Mauro Carvalho Chehab <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Input: cobalt_btns - convert to use polldev library

Signed-off-by: Dmitry Torokhov <[email protected]>
Acked-by: Yoichi Yuasa <[email protected]>

Input: cobalt buttons - separate device and driver registration

Create platform device for cobalt buttons as part of arch setup.
This makes the driver follow current driver model more closely.

Sign

Input: cobalt buttons - separate device and driver registration

Create platform device for cobalt buttons as part of arch setup.
This makes the driver follow current driver model more closely.

Signed-off-by: Dmitry Torokhov <[email protected]>
Acked-by: Yoichi Yuasa <[email protected]>

show more ...

Input: add driver for MIPS Cobalt back panel buttons

Tested on Cobalt Qube2.

Signed-off-by: Yoichi Yuasa <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>