Input: max77693 - add max77705 haptic support

Add support for haptic controller on MAX77705 Multifunction
device.

This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User ca

Input: max77693 - add max77705 haptic support

Add support for haptic controller on MAX77705 Multifunction
device.

This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User can control the haptic device via force feedback framework.

Signed-off-by: Dzmitry Sankouski <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-6-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <[email protected]>

show more ...

Input: add driver for the input part of qnap-mcu devices

The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
powe

Input: add driver for the input part of qnap-mcu devices

The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
power-button needs to be polled. To generate an event the power-button
also needs to be held for 1-2 seconds, so the polling interval does
not need to be overly fast.

Signed-off-by: Heiko Stuebner <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

input: Add onkey driver for Marvell 88PM886 PMIC

Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting a

input: Add onkey driver for Marvell 88PM886 PMIC

Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting additional functions found in the vendor version, such as long
onkey and GPIO integration.

Signed-off-by: Karel Balej <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

Input: cs40l50 - Add support for the CS40L50 haptic driver

Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The i

Input: cs40l50 - Add support for the CS40L50 haptic driver

Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The input driver provides the interface for control of
haptic effects through the device.

Signed-off-by: James Ogletree <[email protected]>
Reviewed-by: Jeff LaBundy <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

Input: iqs7222 - add support for Azoteq IQS7222D

The vendor has introduced a new variant of silicon which is highly
similar to the existing IQS7222A, but with its independent sliders
essentially rep

Input: iqs7222 - add support for Azoteq IQS7222D

The vendor has introduced a new variant of silicon which is highly
similar to the existing IQS7222A, but with its independent sliders
essentially replaced with a single-contact trackpad.

Update the common driver to support this new device's register map
and report trackpad events. As with the IQS7222A, the new IQS7222D
can report both raw coordinates as well as gestures.

Signed-off-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/ZKrpRh6RT6+6KrMQ@nixie71
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <[email protected]> # for RTC
Tested-by: Diederik

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <[email protected]> # for RTC
Tested-by: Diederik de Haas <[email protected]> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <[email protected]> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

Input: bbnsm_pwrkey - add bbnsm power key support

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signa

Input: bbnsm_pwrkey - add bbnsm power key support

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signal and a wakeup request input signal. It also
has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an
active-low PMIC enable (pmic_en_b) output.

Add the power key support for the ON/OFF button function found in
BBNSM module.

Signed-off-by: Jacky Bai <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: Add tps65219 interrupt driven powerbutton

TPS65219 has different interrupts compared to other TPS6521* chips.
TPS65219 defines two interrupts for the powerbutton one for push and one
for rele

Input: Add tps65219 interrupt driven powerbutton

TPS65219 has different interrupts compared to other TPS6521* chips.
TPS65219 defines two interrupts for the powerbutton one for push and one
for release.

This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.

Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Signed-off-by: Jerome Neanne <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

mfd: Remove dm355evm_msp driver

The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.

Signed-off-by

mfd: Remove dm355evm_msp driver

The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.

Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

Input: wistron_btns - disable on UML

The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.

Prevents this build error:

ld: drivers/inp

Input: wistron_btns - disable on UML

The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.

Prevents this build error:

ld: drivers/input/misc/wistron_btns.o: in function `poll_bios':
wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read'

Fixes: 0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: atmel_captouch - drop obsolete dependency on COMPILE_TEST

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any

Input: atmel_captouch - drop obsolete dependency on COMPILE_TEST

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.

It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.

As a matter of fact, dropping the alternative dependency on
COMPILE_TEST allows removing preprocessor directives, which will
speed up the build.

Signed-off-by: Jean Delvare <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: rt5120 - add power key support

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <[email protected]>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u00845

Input: rt5120 - add power key support

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: Add IBM Operation Panel driver

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bu

Input: Add IBM Operation Panel driver

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.

Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]> # I2C slave parts
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: add support for Azoteq IQS7222A/B/C

This patch adds support for the Azoteq IQS7222A/B/C family of
capacitive touch controllers.

Signed-off-by: Jeff LaBundy <[email protected]>
Link: https://l

Input: add support for Azoteq IQS7222A/B/C

This patch adds support for the Azoteq IQS7222A/B/C family of
capacitive touch controllers.

Signed-off-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: remove dead CSR Prima2 PWRC driver

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corr

Input: remove dead CSR Prima2 PWRC driver

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code.
Remove this dead driver.

Signed-off-by: Lukas Bulwahn <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: ixp4xx-beeper - delete driver

The NSLU2 has been migrated to devicetree and there we use
the gpio-beeper.c driver instead, the boardfile will be deleted
for kernel v5.15 so drop this custom a

Input: ixp4xx-beeper - delete driver

The NSLU2 has been migrated to devicetree and there we use
the gpio-beeper.c driver instead, the boardfile will be deleted
for kernel v5.15 so drop this custom and now unneeded driver.

Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: Add support for Azoteq IQS626A

This patch adds support for the Azoteq IQS626A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/2021

Input: Add support for Azoteq IQS626A

This patch adds support for the Azoteq IQS626A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

input: atc260x: Add onkey driver for ATC260x PMICs

The Actions Semi ATC260x PMICs are able to manage an onkey button.
This driver exposes the ATC260x onkey as an input device. It can also
be configu

input: atc260x: Add onkey driver for ATC260x PMICs

The Actions Semi ATC260x PMICs are able to manage an onkey button.
This driver exposes the ATC260x onkey as an input device. It can also
be configured to force a system reset on a long key-press with an
adjustable duration.

The currently supported chip variants are ATC2603C and ATC2609A.

Signed-off-by: Cristian Ciocaltea <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

Input: new da7280 haptic driver

Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with
multiple mode and integrated waveform memory and wideband support.
It communicates via an I2C bus to the

Input: new da7280 haptic driver

Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with
multiple mode and integrated waveform memory and wideband support.
It communicates via an I2C bus to the device.

Signed-off-by: Roy Im <[email protected]>
Reviewed-by: Jes Sorensen <[email protected]>.
Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: add driver for power button on Dell Wyse 3020

This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.

The Embedded Controller's SPI inte

Input: add driver for power button on Dell Wyse 3020

This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.

The Embedded Controller's SPI interface is actually capable sending and
receiving the PS/2 keyboard and mouse protocol data, which looks like
a good fit for a serio driver. Howerver, I don't know of any machines where
this is actually used.

My board only has a single power button and no way to connect an actual
keyboard or a mouse. Using the atkbd driver with serio would be an overkill
and would be inconvenient for the userspace. Therefore this driver
registers an input device that is only capable of reporting the power
button presses and releases.

Signed-off-by: Lubomir Rintel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: iqs269a - add missing I2C dependency

If CONFIG_INPUT_IQS269A is selected yet CONFIG_I2C is not, the build
fails. To solve this problem, add I2C as a dependency.

Signed-off-by: Jeff LaBundy <

Input: iqs269a - add missing I2C dependency

If CONFIG_INPUT_IQS269A is selected yet CONFIG_I2C is not, the build
fails. To solve this problem, add I2C as a dependency.

Signed-off-by: Jeff LaBundy <[email protected]>
Reported-by: kbuild test robot <[email protected]>
Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: add support for Azoteq IQS269A

This patch adds support for the Azoteq IQS269A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/1588

Input: add support for Azoteq IQS269A

This patch adds support for the Azoteq IQS269A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: remove msm-vibrator driver

The address referenced by this driver is within the Qualcomm Clock
namespace so let's drop the msm-vibrator bindings so that a more generic
solution can be used ins

Input: remove msm-vibrator driver

The address referenced by this driver is within the Qualcomm Clock
namespace so let's drop the msm-vibrator bindings so that a more generic
solution can be used instead. No one is currently using driver so this
won't affect any users.

Signed-off-by: Brian Masney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: delete unused GP2AP002A00F driver

There is now an IIO driver for GP2AP002A00F and GP2AP002S00F in
drivers/iio/light/gp2ap002.c.

Delete this driver, it is unused in the kernel tree and new us

Input: delete unused GP2AP002A00F driver

There is now an IIO driver for GP2AP002A00F and GP2AP002S00F in
drivers/iio/light/gp2ap002.c.

Delete this driver, it is unused in the kernel tree and new users can make
use of the IIO driver.

Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...

Input: kxtj9 - switch to using polled mode of input devices

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts kxtj9 driver to use the

Input: kxtj9 - switch to using polled mode of input devices

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts kxtj9 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.

note that with regular input devices handling polling, there is no longer a
benefit in having separate INPUT_KXTJ9_POLLED_MODE config option.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>

show more ...