RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS

hns driver used to support hip06 and hip08 devices with
CONFIG_INFINIBAND_HNS_HIP06 and CONFIG_INFINIBAND_HNS_HIP08
respectively, which both depen

RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS

hns driver used to support hip06 and hip08 devices with
CONFIG_INFINIBAND_HNS_HIP06 and CONFIG_INFINIBAND_HNS_HIP08
respectively, which both depended on CONFIG_INFINIBAND_HNS.

But we no longer provide support for hip06 and only support
hip08 and higher since the commit in fixes line, so there is
no need to have CONFIG_INFINIBAND_HNS any more. Remove it and
only keep CONFIG_INFINIBAND_HNS_HIP08.

Fixes: 38d220882426 ("RDMA/hns: Remove support for HIP06")
Signed-off-by: Junxian Huang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>

show more ...

RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Add a RDMA VF driver for Microsoft Azure Network Adapter (MANA).

Co-developed-by: Ajay Sharma <[email protected]>
Signed-off-by

RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter

Add a RDMA VF driver for Microsoft Azure Network Adapter (MANA).

Co-developed-by: Ajay Sharma <[email protected]>
Signed-off-by: Ajay Sharma <[email protected]>
Reviewed-by: Dexuan Cui <[email protected]>
Signed-off-by: Long Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>

show more ...

RDMA/erdma: Add driver to kernel build environment

Add erdma to the kernel build environment, and sort the source
order in drivers/infiniband/Kconfig.

Link: https://lore.kernel.org/r/20220727014927

RDMA/erdma: Add driver to kernel build environment

Add erdma to the kernel build environment, and sort the source
order in drivers/infiniband/Kconfig.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cheng Xu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw

Add Kconfig and Makefile to build irdma driver.

Remove i40iw driver and add an alias in irdma.

Remove legacy exported symbols i40e_register_

RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw

Add Kconfig and Makefile to build irdma driver.

Remove i40iw driver and add an alias in irdma.

Remove legacy exported symbols i40e_register_client
and i40e_unregister_client from i40e as they are no
longer used.

irdma is the replacement driver that supports X722.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

RDMA/iw_cxgb3: Remove the iw_cxgb3 module from kernel

Remove iw_cxgb3 module from kernel as the corresponding HW Chelsio T3 has
reached EOL.

Link: https://lore.kernel.org/r/20190930074252.20133-1-b

RDMA/iw_cxgb3: Remove the iw_cxgb3 module from kernel

Remove iw_cxgb3 module from kernel as the corresponding HW Chelsio T3 has
reached EOL.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Potnuri Bharat Teja <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

rdma: Remove nes

This driver was first merged over 10 years ago and has not seen major
activity by the authors in the last 7 years. However, in that time it has
been patched 150 times to adapt it to

rdma: Remove nes

This driver was first merged over 10 years ago and has not seen major
activity by the authors in the last 7 years. However, in that time it has
been patched 150 times to adapt it to changing kernel APIs.

Further, the hardware has several issues, like not supporting 64 bit DMA,
that make it rather uninteresting for use with modern systems and RDMA.

Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Shiraz Saleem <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

RDMA/efa: Add driver to Kconfig/Makefile

Add EFA Makefile and Kconfig.

Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Steve Wise <[email protected]>
Signed-off-by: Jason G

RDMA/efa: Add driver to Kconfig/Makefile

Add EFA Makefile and Kconfig.

Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Steve Wise <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

RDMA/bnxt_re: Add bnxt_re driver build support

Makefile and Kconfig changes for enabling bnxt_re compilation

Signed-off-by: Devesh Sharma <[email protected]>
Signed-off-by: Somnath Kotur <

RDMA/bnxt_re: Add bnxt_re driver build support

Makefile and Kconfig changes for enabling bnxt_re compilation

Signed-off-by: Devesh Sharma <[email protected]>
Signed-off-by: Somnath Kotur <[email protected]>
Signed-off-by: Sriharsha Basavapatna <[email protected]>
Signed-off-by: Selvin Xavier <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

IB: Add vmw_pvrdma driver

This patch series adds a driver for a paravirtual RDMA device. The
device is developed for VMware's Virtual Machines and allows existing RDMA
applications to continue to us

IB: Add vmw_pvrdma driver

This patch series adds a driver for a paravirtual RDMA device. The
device is developed for VMware's Virtual Machines and allows existing RDMA
applications to continue to use existing Verbs API when deployed in VMs
on ESXi. We recently did a presentation in the OFA Workshop [1] regarding
this device.

Description and RDMA Support
============================
The virtual device is exposed as a dual function PCIe device. One part
is a virtual network device (VMXNet3) which provides networking properties
like MAC, IP addresses to the RDMA part of the device. The networking
properties are used to register GIDs required by RDMA applications to
communicate.

These patches add support and the all required infrastructure for
letting applications use such a device. We support the mandatory Verbs API as
well as the base memory management extensions (Local Inv, Send with Inv and
Fast Register Work Requests). We currently support both Reliable Connected
and Unreliable Datagram QPs but do not support Shared Receive Queues
(SRQs).

Also, we support the following types of Work Requests:
o Send/Receive (with or without Immediate Data)
o RDMA Write (with or without Immediate Data)
o RDMA Read
o Local Invalidate
o Send with Invalidate
o Fast Register Work Requests

This version only adds support for version 1 of RoCE. We will add RoCEv2
support in a future patch. We do support registration of both MAC-based
and IP-based GIDs. I have also created a git tree for our user-level driver
[2].

Testing
=======
We have tested this internally for various types of Guest OS - Red Hat,
Centos, Ubuntu 12.04/14.04/16.04, Oracle Enterprise Linux, SLES 12
using backported versions of this driver. The tests included several
runs of the performance tests (included with OFED), Intel MPI PingPong
benchmark on OpenMPI, krping for FRWRs. Mellanox has been kind enough
to test the backported version of the driver internally on their hardware
using a VMware provided ESX build. I have also applied and tested this
with Doug's k.o/for-4.9 branch (commit 5603910b). Note, that this patch
series should be applied all together. I split out the commits so that
it may be easier to review.

PVRDMA Resources
================
[1] OFA Workshop Presentation -
https://openfabrics.org/images/eventpresos/2016presentations/102parardma.pdf

[2] Libpvrdma User-level library -
http://git.openfabrics.org/?p=~aditr/libpvrdma.git;a=summary

Reviewed-by: Jorgen Hansen <[email protected]>
Reviewed-by: George Zhang <[email protected]>
Reviewed-by: Aditya Sarwade <[email protected]>
Reviewed-by: Bryan Tan <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Adit Ranadive <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

qedr: Add RoCE driver framework

Adds a skeletal implementation of the qed* RoCE driver -
basically the ability to communicate with the qede driver and
receive notifications from it regarding various

qedr: Add RoCE driver framework

Adds a skeletal implementation of the qed* RoCE driver -
basically the ability to communicate with the qede driver and
receive notifications from it regarding various init/exit events.

Signed-off-by: Rajesh Borundia <[email protected]>
Signed-off-by: Ram Amrani <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

IB/hns: Kconfig and Makefile for RoCE module

This patch added Kconfig and Makefile for building RoCE module.

Signed-off-by: Wei Hu <[email protected]>
Signed-off-by: Nenglong Zhao <zhaonenglo

IB/hns: Kconfig and Makefile for RoCE module

This patch added Kconfig and Makefile for building RoCE module.

Signed-off-by: Wei Hu <[email protected]>
Signed-off-by: Nenglong Zhao <[email protected]>
Signed-off-by: Lijun Ou <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

IB/hfi1: Move driver out of staging

The TODO list for the hfi1 driver was completed during 4.6. In addition
other objections raised (which are far beyond what was in the TODO list)
have been address

IB/hfi1: Move driver out of staging

The TODO list for the hfi1 driver was completed during 4.6. In addition
other objections raised (which are far beyond what was in the TODO list)
have been addressed as well. It is now time to remove the driver from
staging and into the drivers/infiniband sub-tree.

Reviewed-by: Jubin John <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

i40iw: changes for build of i40iw module

MAINTAINERS, Kconfig, and Makefile to build i40iw module

Signed-off-by: Faisal Latif <[email protected]>
Signed-off-by: Doug Ledford <[email protected]

i40iw: changes for build of i40iw module

MAINTAINERS, Kconfig, and Makefile to build i40iw module

Signed-off-by: Faisal Latif <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

IB/ehca: Deprecate driver, move to staging, schedule deletion

The ehca driver is only supported on IBM machines with a custom EBus.
As they have opted to build their newer machines using more indust

IB/ehca: Deprecate driver, move to staging, schedule deletion

The ehca driver is only supported on IBM machines with a custom EBus.
As they have opted to build their newer machines using more industry
standard technology and haven't really been pushing EBus capable
machines for a while, this driver can now safely be moved to the
staging area and scheduled for eventual removal. This plan was brought
to IBM's attention and received their sign-off.

Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Doug Ledford <[email protected]>

show more ...

RDMA/amso1100: Deprecate the amso1100 driver and move to staging

The HW hasn't been sold since 2005, and the SW has definite bit rot.
Its time to remove it. So move it to staging for a few releases

RDMA/amso1100: Deprecate the amso1100 driver and move to staging

The HW hasn't been sold since 2005, and the SW has definite bit rot.
Its time to remove it. So move it to staging for a few releases and
then remove it after that.

Signed-off-by: Steve Wise <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

IB/ipath: Deprecate ipath driver and move to staging.

It is now time for the ipath driver to begin to be phased out of the kernel.
This patch moves the ipath driver from the Infiniband sub tree to t

IB/ipath: Deprecate ipath driver and move to staging.

It is now time for the ipath driver to begin to be phased out of the kernel.
This patch moves the ipath driver from the Infiniband sub tree to the staging
area where it will remain until the code is removed from the kernel in a few
releases.

Reviewed-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>

show more ...

IB: Allow build of hw/ and ulp/ subdirectories independently

It is not possible to build only the drivers/infiniband/hw/ (or ulp/)
subdirectory with command such as:

$ make ARCH=x86_64 O=./obj-

IB: Allow build of hw/ and ulp/ subdirectories independently

It is not possible to build only the drivers/infiniband/hw/ (or ulp/)
subdirectory with command such as:

$ make ARCH=x86_64 O=./obj-x86_64/ drivers/infiniband/hw/

This fails with following error messages:

make[2]: Nothing to be done for `all'.
make[2]: Nothing to be done for `relocs'.
CHK include/config/kernel.release
Using /home/ydroneaud/src/linux as source for kernel
GEN /home/ydroneaud/src/linux/obj-x86_64/Makefile
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
CALL /home/ydroneaud/src/linux/scripts/checksyscalls.sh
/home/ydroneaud/src/linux/scripts/Makefile.build:44: /home/ydroneaud/src/linux/drivers/infiniband/hw/Makefile: No such file or directory
make[2]: *** No rule to make target `/home/ydroneaud/src/linux/drivers/infiniband/hw/Makefile'. Stop.
make[1]: *** [drivers/infiniband/hw/] Error 2
make: *** [sub-make] Error 2

This patch creates a Makefile in hw/ and ulp/ and moves each
corresponding parts of drivers/infiniband/Makefile in the new
Makefiles.

It should not break build except if some hw/ drivers or ulp/ were
allowed previously to be built while CONFIG_INFINIBAND is set to 'n',
but according to drivers/infiniband/Kconfig, it's not possible. So it
should be safe to apply.

Signed-off-by: Yann Droneaud <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Roland Dreier <[email protected]>

show more ...