iio: humidity: Add support for ENS210

Add support for ENS210/ENS210A/ENS211/ENS212/ENS213A/ENS215.

The ENS21x is a family of temperature and relative humidity sensors with
accuracies tailored to th

iio: humidity: Add support for ENS210

Add support for ENS210/ENS210A/ENS211/ENS212/ENS213A/ENS215.

The ENS21x is a family of temperature and relative humidity sensors with
accuracies tailored to the needs of specific applications.

Signed-off-by: Joshua Felmeden <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry

Something when wrong when applying the original patch and only the
c file made it in. Here the rest of the changes are applied.

iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry

Something when wrong when applying the original patch and only the
c file made it in. Here the rest of the changes are applied.

Fixes: c9180b8e39be ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reported-by: Lars-Peter Clausen <[email protected]>
Cc: Javier Carrasco <[email protected]>
Cc: Li peiyu <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Lars-Peter Clausen <[email protected]>

show more ...

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_trigge

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.

The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.

Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.

All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.

Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <[email protected]>
Cc: Srinivas Pandruvada <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: Add TI HDC20x0 support

Add driver support for HDC2010/2080 series devices and sysfs
documentation for their heater element.

HDC2010 is an integrated high-accuracy humidity and temper

iio: humidity: Add TI HDC20x0 support

Add driver support for HDC2010/2080 series devices and sysfs
documentation for their heater element.

HDC2010 is an integrated high-accuracy humidity and temperature sensor
with very low power consumption. The device includes a resistive heating
element. The temperature range is -40C to 125C with 0.2C
accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy.

Signed-off-by: Eugene Zaikonnikov <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers: iio: Kconfig: pedantic cleanup

Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>

drivers: iio: Kconfig: pedantic cleanup

Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: hts221: add regmap API support

Introduce regmap API support to access to i2c/spi bus instead of
using a custom support.
Remove lock mutex since concurrency is already managed by regma

iio: humidity: hts221: add regmap API support

Introduce regmap API support to access to i2c/spi bus instead of
using a custom support.
Remove lock mutex since concurrency is already managed by regmap API

Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: hdc100x: document compatible HDC10xx devices

Include datasheet links, add i2c_device_id entries, and update
kconfig help for compatible HDC10xx devices: HDC1000, HDC1008,
HDC1010, HDC

iio: humidity: hdc100x: document compatible HDC10xx devices

Include datasheet links, add i2c_device_id entries, and update
kconfig help for compatible HDC10xx devices: HDC1000, HDC1008,
HDC1010, HDC1050, and HDC1080.

Signed-off-by: Michael Stecklein <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: hid: Add humidity sensor support

Environmental humidity sensor is a hid defined sensor,
it shows raw humidity measurement of air.

More information can be found in:
http://www.usb.org/developer

iio: hid: Add humidity sensor support

Environmental humidity sensor is a hid defined sensor,
it shows raw humidity measurement of air.

More information can be found in:
http://www.usb.org/developers/hidpage/HUTRR39b.pdf

According to IIO ABI definition, humidityrelative data output unit is
milli percent. Add the unit convert from percent to milli percent.

Signed-off-by: Song Hongyan <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: hdc100x: add triggered buffer support for HDC100X

Triggered buffer support uses the HDC100X's dual acquisition mode
to read both humidity and temperature in one shot.

This patch depe

iio: humidity: hdc100x: add triggered buffer support for HDC100X

Triggered buffer support uses the HDC100X's dual acquisition mode
to read both humidity and temperature in one shot.

This patch depends on
447136effbf4 ("iio: humidity: hdc100x: fix sensor data reads of
temp and humidity")

Signed-off-by: Alison Schofield <[email protected]>
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: add support to hts221 rh/temp combo device

Add support to STM HTS221 humidity + temperature sensor

http://www.st.com/resource/en/datasheet/hts221.pdf

- continuous mode support
- i2c

iio: humidity: add support to hts221 rh/temp combo device

Add support to STM HTS221 humidity + temperature sensor

http://www.st.com/resource/en/datasheet/hts221.pdf

- continuous mode support
- i2c support
- spi support
- trigger mode support

Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: hdc100x: add HDC1000 and HDC1008 to Kconfig

hdc100x supports Texas Instruments HDC1000 and HDC1008 relative
humidity and temperature sensors. Add these product names to
Kconfig.

Sign

iio: humidity: hdc100x: add HDC1000 and HDC1008 to Kconfig

hdc100x supports Texas Instruments HDC1000 and HDC1008 relative
humidity and temperature sensors. Add these product names to
Kconfig.

Signed-off-by: Alison Schofield <[email protected]>
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: add Kconfig selects needed for triggered buffer compiles

Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile.
Remove IIO_TRIGGER if present since IIO_BUFFER selects it.

Signed-off-by: Alison

iio: add Kconfig selects needed for triggered buffer compiles

Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile.
Remove IIO_TRIGGER if present since IIO_BUFFER selects it.

Signed-off-by: Alison Schofield <[email protected]>
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: Add support for AM2315

Add basic support for the Aosong AM2315 relative humidity
and ambient temperature sensor.
Includes support for raw readings and ACPI detection.

Datasheet:
http

iio: humidity: Add support for AM2315

Add basic support for the Aosong AM2315 relative humidity
and ambient temperature sensor.
Includes support for raw readings and ACPI detection.

Datasheet:
http://www.aosong.com/asp_bin/Products/en/AM2315.pdf

Signed-off-by: Tiberiu Breana <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: si7020: add support for Hoperf th06

This patch adds support for Hoperf th06 humidity and
temperature sensor as it uses same register definitions
as si7020

th06 Datasheet: http://www.hoperf.com

iio: si7020: add support for Hoperf th06

This patch adds support for Hoperf th06 humidity and
temperature sensor as it uses same register definitions
as si7020

th06 Datasheet: http://www.hoperf.com/upload/sensor/TH06.pdf

Signed-off-by: Cristina Moraru <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: si7005: add support for Hoperf th02

This patch adds support for Hoperf th02 humidity and
temperature sensor as it uses same register definitions
as si7005

th02 Datasheet: http://www.anglia-liv

iio: si7005: add support for Hoperf th02

This patch adds support for Hoperf th02 humidity and
temperature sensor as it uses same register definitions
as si7005

th02 Datasheet: http://www.anglia-live.com/netalogue/pdfs/hrf/datasheets/TH02_V1.1.pdf

Signed-off-by: Cristina Moraru <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

Add ms8607 meas-spec driver support

Support for MS8607 temperature, pressure & humidity sensor.
This part is using functions from MS5637 for temperature and pressure
and HTU21 for humidity

Signed-o

Add ms8607 meas-spec driver support

Support for MS8607 temperature, pressure & humidity sensor.
This part is using functions from MS5637 for temperature and pressure
and HTU21 for humidity

Signed-off-by: Ludovic Tancerel <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

Add htu21 meas-spec driver support

Support for HTU21 temperature & humidity sensor

Signed-off-by: Ludovic Tancerel <[email protected]>
Signed-off-by: Jonathan Cameron <jic23@kernel

Add htu21 meas-spec driver support

Support for HTU21 temperature & humidity sensor

Signed-off-by: Ludovic Tancerel <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: humidity: add HDC100x support

Add support for the HDC100x temperature and humidity sensors
including the resistive heater element.

Signed-off-by: Matt Ranostay <[email protected]>
Signed-off

iio: humidity: add HDC100x support

Add support for the HDC100x temperature and humidity sensors
including the resistive heater element.

Signed-off-by: Matt Ranostay <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer

iio: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: [email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

IIO: add si7020 driver

This patch adds support to the Industrial IO subsystem
for the Silicon Labs Si7013/20/21 Relative Humidity and
Temperature Sensors.

Website: http://www.silabs.com/products/se

IIO: add si7020 driver

This patch adds support to the Industrial IO subsystem
for the Silicon Labs Si7013/20/21 Relative Humidity and
Temperature Sensors.

Website: http://www.silabs.com/products/sensors/humidity-sensors/Pages/si7013-20-21.aspx

These are i2c devices which measure relative humidity
and temperature and all use the same protocol. The
Si7013 has an additional input with programmable
linearization which is not supported because that's
complicated and I didn't need it.

Signed-off-by: David Barksdale <[email protected]>

--
Changes since v1:
* Renamed to si7020 and replaced Si701x/2x with Si7013/20/21.
* Removed unneeded mutex.
* Pre-computed floating-point constant expressions.
* Removed address_list and I2C_CLASS_HWMON.

Changes since v2:
* Return correct raw sensor values.
* Rename dev variable to indio_dev.
* Issue a software reset command during probe.
* Un-broke string literal.

Changes since v3:
* enum changed to #define
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: Add si7005 relative humidity and temperature sensor driver

sensor provides 12-bit relative humidity and 14-bit temperature
via I2C interface; temperature and linearity compensation is not
imple

iio: Add si7005 relative humidity and temperature sensor driver

sensor provides 12-bit relative humidity and 14-bit temperature
via I2C interface; temperature and linearity compensation is not
implemented (yet)

driver also supports the Si7015, but not the 2nd generation
sensors Si7013/Si7020/Si7021

datasheet is here
http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7005.pdf

v2: (thanks to Lars-Peter Clausen)
* fix coding style
* use devm_iio_device_register()
* change copyright year to 2014

Signed-off-by: Peter Meerwald <[email protected]>
Reviewed-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: Add new driver dht11

This driver handles DHT11 and DHT22 sensors.

Signed-off-by: Harald Geyer <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>