iio: accel: kx022a: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' an

iio: accel: kx022a: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Signed-off-by: Javier Carrasco <[email protected]>
Acked-by: Matti Vaittinen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: add ADXL380 driver

The ADXL380/ADXL382 is a low noise density, low power, 3-axis
accelerometer with selectable measurement ranges. The ADXL380 supports
the +/-4 g, +/-8 g, and +/-16 g ra

iio: accel: add ADXL380 driver

The ADXL380/ADXL382 is a low noise density, low power, 3-axis
accelerometer with selectable measurement ranges. The ADXL380 supports
the +/-4 g, +/-8 g, and +/-16 g ranges, and the ADXL382 supports
+/-15 g, +/-30 g and +/-60 g ranges.
The ADXL380/ADXL382 offers industry leading noise, enabling precision
applications with minimal calibration. The low noise, and low power
ADXL380/ADXL382 enables accurate measurement in an environment with
high vibration, heart sounds and audio.

In addition to its low power consumption, the ADXL380/ADXL382 has many
features to enable true system level performance. These include a
built-in micropower temperature sensor, single / double / triple tap
detection and a state machine to prevent a false triggering. In
addition, the ADXL380/ADXL382 has provisions for external control of
the sampling time and/or an external clock.

Signed-off-by: Ramona Gradinariu <[email protected]>
Signed-off-by: Antoniu Miclaus <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF

Provide missing symbols to the module:
ERROR: modpost: iio_push_to_buffers [drivers/iio/accel/fxls8962af-core.ko] undefined!
ERROR: modpost:

iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF

Provide missing symbols to the module:
ERROR: modpost: iio_push_to_buffers [drivers/iio/accel/fxls8962af-core.ko] undefined!
ERROR: modpost: devm_iio_kfifo_buffer_setup_ext [drivers/iio/accel/fxls8962af-core.ko] undefined!

Cc: [email protected]
Fixes: 79e3a5bdd9ef ("iio: accel: fxls8962af: add hw buffered sampling")
Signed-off-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Sean Nyekjaer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bma400: Fix a compilation problem

The kernel fails when compiling without `CONFIG_REGMAP_I2C` but with
`CONFIG_BMA400`.
```
ld: drivers/iio/accel/bma400_i2c.o: in function `bma400_i2c_pr

iio: accel: bma400: Fix a compilation problem

The kernel fails when compiling without `CONFIG_REGMAP_I2C` but with
`CONFIG_BMA400`.
```
ld: drivers/iio/accel/bma400_i2c.o: in function `bma400_i2c_probe':
bma400_i2c.c:(.text+0x23): undefined reference to `__devm_regmap_init_i2c'
```

Link: https://download.01.org/0day-ci/archive/20240131/[email protected]/config
Fixes: 465c811f1f20 ("iio: accel: Add driver for the BMA400")
Fixes: 9bea10642396 ("iio: accel: bma400: add support for bma400 spi")
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bmi088: add i2c support for bmi088 accel driver

The BMI088, BMI085 and BMI090L accelerometer also support
I2C protocol, so let's add the missing I2C support.

The I2C interface of the {B

iio: accel: bmi088: add i2c support for bmi088 accel driver

The BMI088, BMI085 and BMI090L accelerometer also support
I2C protocol, so let's add the missing I2C support.

The I2C interface of the {BMI085,BMI088,BMI090L} is compatible with
the I2C Specification UM10204 Rev. 03 (19 June 2007), available at
http://www.nxp.com. The {BMI085,BMI088,BMI090L} supports I2C standard
mode and fast mode, only 7-bit address mode is supported.

Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi085-ds001.pdf
Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
Datasheet: https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/4807/BST-BMI090L-DS000-00.pdf
Signed-off-by: Jun Yan <[email protected]>

Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bmi088: update comments and Kconfig

update the comments and Kconfig file with more descriptive and
accurate information about newly added device: BMI085, BMI090L.

Signed-off-by: Jun Yan

iio: accel: bmi088: update comments and Kconfig

update the comments and Kconfig file with more descriptive and
accurate information about newly added device: BMI085, BMI090L.

Signed-off-by: Jun Yan <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: kx022a: Support ROHM KX132ACR-LBZ

dt-bindings: iio: Add KX132ACR-LBZ accelerometer

ROHM KX132ACR-LBZ is an accelerometer for industrial applications. It
has a subset of KX022A functionalities,

iio: kx022a: Support ROHM KX132ACR-LBZ

dt-bindings: iio: Add KX132ACR-LBZ accelerometer

ROHM KX132ACR-LBZ is an accelerometer for industrial applications. It
has a subset of KX022A functionalities, dropping support for tap, free
fall and tilt detection engines. Also, the register interface is an exact
subset of what is found on KX022A (except the WHO_AM_I register value).

Add support for KX132ACR-LBZ.

Signed-off-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/272065b9f35b817aff86b7760ff1aaaaaaa969f5.1695879676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

Kionix KX132-1211 is a tri-axis 16-bit accelerometer that can support
ranges from ±2G to ±16G, digital output through I²C/SPI.
Add su

iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer

Kionix KX132-1211 is a tri-axis 16-bit accelerometer that can support
ranges from ±2G to ±16G, digital output through I²C/SPI.
Add support for basic accelerometer features such as reading acceleration
via IIO using raw reads, triggered buffer (data-ready), or the WMI IRQ.

Datasheet: https://kionixfs.azureedge.net/en/document/KX132-1211-Technical-Reference-Manual-Rev-5.0.pdf
Acked-by: Matti Vaittinen <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mehdi Djait <[email protected]>
Link: https://lore.kernel.org/r/389a7d6100ff2e71b1c5d60bebe662d09435996a.1694867379.git.mehdi.djait.k@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: st_accel: Add LSM303C

The accelerometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS2HH12 accelerometer, so just
add the new st,lsm303c-

iio: accel: st_accel: Add LSM303C

The accelerometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS2HH12 accelerometer, so just
add the new st,lsm303c-accel compatible for the existing definitions.

Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: Support Kionix/ROHM KX022A accelerometer

KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features
include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,

iio: accel: Support Kionix/ROHM KX022A accelerometer

KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features
include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,
tap/motion detection, wake-up & back-to-sleep events, four acceleration
ranges (2, 4, 8 and 16g), and probably some other cool features.

Add support for the basic accelerometer features such as getting the
acceleration data via IIO. (raw reads, triggered buffer [data-ready] or
using the WMI IRQ).

Important things to be added include the double-tap, motion
detection and wake-up as well as the runtime power management.

Signed-off-by: Matti Vaittinen <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/758b00d6aea0a6431a5a3a78d557d449c113b21e.1666614295.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: add MEMSensing MSA311 3-axis accelerometer driver

MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
sensitivity consumer applications. It has dynamic user-selectable full
s

iio: add MEMSensing MSA311 3-axis accelerometer driver

MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
sensitivity consumer applications. It has dynamic user-selectable full
scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
with output data rates from 1Hz to 1000Hz.

This driver supports following MSA311 features:
- IIO interface
- Different power modes: NORMAL and SUSPEND (using pm_runtime)
- ODR (Output Data Rate) selection
- Scale and samp_freq selection
- IIO triggered buffer, IIO reg access
- NEW_DATA interrupt + trigger

Below features to be done:
- Motion Events: ACTIVE, TAP, ORIENT, FREEFALL
- Low Power mode

Datasheet: https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
Signed-off-by: Dmitry Rokosov <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bma400: Add triggered buffer support

Added trigger buffer support to read continuous acceleration
and temperature data from device with data ready interrupt which
is mapped to INT1 pin.

iio: accel: bma400: Add triggered buffer support

Added trigger buffer support to read continuous acceleration
and temperature data from device with data ready interrupt which
is mapped to INT1 pin.

Signed-off-by: Jagath Jog J <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: dmard06: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchen

iio: accel: dmard06: Drop dependency on OF

Nothing in this driver depends on OF firmware so drop the dependency
to remove the false impression such a dependency exists.

Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: add ADXL367 driver

The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.

The ADXL367 does not alias input signals to achieve ultralow power
consumption, it samples the full bandw

iio: accel: add ADXL367 driver

The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.

The ADXL367 does not alias input signals to achieve ultralow power
consumption, it samples the full bandwidth of the sensor at all
data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
with a resolution of 0.25mg/LSB on the +-2 g range.

In addition to its ultralow power consumption, the ADXL367
has many features to enable true system level power reduction.
It includes a deep multimode output FIFO, a built-in micropower
temperature sensor, and an internal ADC for synchronous conversion
of an additional analog input.

Signed-off-by: Cosmin Tanislav <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: st_sensors: don't always auto-enable I2C and SPI interface drivers

This patch makes I2C and SPI interface drivers for STMicroelectronics
sensor chips individually selectable via Kconfig.

The d

iio: st_sensors: don't always auto-enable I2C and SPI interface drivers

This patch makes I2C and SPI interface drivers for STMicroelectronics
sensor chips individually selectable via Kconfig.

The default is kept unchanged - I2C and SPI interface drivers are still
selected by default if the corresponding bus support is available.

However, the patch makes it possible to explicitly disable drivers
that are not needed for a particular target.

Signed-off-by: Nikita Yushchenko <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: adxl355: Add triggered buffer support

Provide a way for continuous data capture by setting up buffer support. The
data ready signal exposed at the DRDY pin of the ADXL355 is exploited as

iio: accel: adxl355: Add triggered buffer support

Provide a way for continuous data capture by setting up buffer support. The
data ready signal exposed at the DRDY pin of the ADXL355 is exploited as
a hardware interrupt which triggers to fill the buffer.

Signed-off-by: Puranjay Mohan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: Add driver support for ADXL313

ADXL313 is a small, thin, low power, 3-axis accelerometer with high
resolution measurement up to +/-4g. It includes an integrated 32-level
FIFO and has act

iio: accel: Add driver support for ADXL313

ADXL313 is a small, thin, low power, 3-axis accelerometer with high
resolution measurement up to +/-4g. It includes an integrated 32-level
FIFO and has activity and inactivity sensing capabilities.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf
Signed-off-by: Lucas Stankus <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/d16e2d1967e46bb2b1024b6d23bc4889da77dc6b.1630523106.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: Add driver support for ADXL355

ADXL355 is a 3-axis MEMS Accelerometer. It offers low noise density,
low 0g offset drift, low power with selectable measurement ranges.
It also features pr

iio: accel: Add driver support for ADXL355

ADXL355 is a 3-axis MEMS Accelerometer. It offers low noise density,
low 0g offset drift, low power with selectable measurement ranges.
It also features programmable high-pass and low-pass filters.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf
Reviewed-by: Alexandru Ardelean <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Puranjay Mohan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bmc150: Add support for BMC156

BMC156 is another accelerometer that works just fine with the bmc150-accel
driver. It's very similar to BMC150 (also a accelerometer + magnetometer
combo)

iio: accel: bmc150: Add support for BMC156

BMC156 is another accelerometer that works just fine with the bmc150-accel
driver. It's very similar to BMC150 (also a accelerometer + magnetometer
combo) but with only one accelerometer interrupt pin. It would make sense
if only INT1 was exposed but someone at Bosch decided to only have an
INT2 pin.

Try to deal with this by making use of the INT2 support introduced
in the previous commit and force using INT2 for BMC156. To detect
that we need to bring up a simplified version of the previous type IDs.

Note that unlike the type IDs removed in commit c06a6aba6835
("iio: accel: bmc150: Drop misleading/duplicate chip identifiers")
here I only add one for the special case of BMC156. Everything else
still happens by reading the CHIP_ID register since the chip type
information often is not accurate in ACPI tables.

Tested-by: Nikita Travkin <[email protected]> # BMC156
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: fxls8962af: fix i2c dependency

With CONFIG_SPI=y and CONFIG_I2C=m, building fxls8962af into vmlinux
causes a link error against the I2C module:

aarch64-linux-ld: drivers/iio/accel/fxls8

iio: accel: fxls8962af: fix i2c dependency

With CONFIG_SPI=y and CONFIG_I2C=m, building fxls8962af into vmlinux
causes a link error against the I2C module:

aarch64-linux-ld: drivers/iio/accel/fxls8962af-core.o: in function `fxls8962af_fifo_flush':
fxls8962af-core.c:(.text+0x3a0): undefined reference to `i2c_verify_client'

Work around it by adding a Kconfig dependency that forces the SPI driver
to be a loadable module whenever I2C is a module.

Fixes: af959b7b96b8 ("iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bma180/bmc150: Move BMA254 to bmc150-accel driver

Commit c1d1c4a62db5 ("iio: accel: bma180: BMA254 support") added
BMA254 support to the bma180 driver and changed some naming to BMA25x
t

iio: accel: bma180/bmc150: Move BMA254 to bmc150-accel driver

Commit c1d1c4a62db5 ("iio: accel: bma180: BMA254 support") added
BMA254 support to the bma180 driver and changed some naming to BMA25x
to make it easier to add support for BMA253 and BMA255.

Unfortunately, there is quite some overlap between the bma180 driver
and the bmc150-accel driver. Back when the commit was made, the
bmc150-accel driver actually already had support for BMA255, and
adding support for BMA254 would have been as simple as adding a new
compatible to bmc150-accel.

The bmc150-accel driver is a bit better for BMA254 since it also
supports the motion trigger/interrupt functionality. Fortunately,
moving BMA254 support over to bmc150-accel is fairly simple because
the drivers have compatible device tree bindings.

Revert most of the changes for BMA254 support in bma180 and move
BMA254 over to bmc150-accel. This has the following advantages:

- Support for motion trigger/interrupt
- Fix incorrect scale values (BMA254 currently uses the same as
BMA250 but actually they're different because of 10 vs 12 bits
data size)
- Less code than before :)

BMA250 could be potentially also moved but it's more complicated
because its chip_id conflicts with the one for BMA222 in bmc150-accel.
Perhaps there are also other register differences, I did not investigate
further yet (and I have no way to test it).

Cc: Peter Meerwald <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bmc150: Add device IDs for BMA253

BMA253 is mostly like BMA255 and has exactly the same register layout
as used by the bmc150-accel driver as far I can tell. Making it work
is as simple

iio: accel: bmc150: Add device IDs for BMA253

BMA253 is mostly like BMA255 and has exactly the same register layout
as used by the bmc150-accel driver as far I can tell. Making it work
is as simple as adding new device IDs for it since it has the same
chip_id = 0xFA (250) as BMA255 and others.

Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: bmc150: Clarify combo modules in Kconfig

The Kconfig option currently says that all Bosch accelerometers
supported by the bmc150-accel driver are combo chips with both
accelerometer and

iio: accel: bmc150: Clarify combo modules in Kconfig

The Kconfig option currently says that all Bosch accelerometers
supported by the bmc150-accel driver are combo chips with both
accelerometer and magnetometer. This is wrong: actually only BMC150
is such a combo. The BMA* variants only contain an accelerometer
and the BMI055 actually is a accelerometer + gyroscope combo.

Clarify this in the help text and also make the list of supported
variants complete and sorted for consistency.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers

Add basic support for NXP FXLS8962AF/FXLS8964AF Automotive
accelerometers.
It will allow setting up scale/gain and reading x,y,z
axis

iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers

Add basic support for NXP FXLS8962AF/FXLS8964AF Automotive
accelerometers.
It will allow setting up scale/gain and reading x,y,z
axis.

Datasheet: https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
Datasheet: https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
Signed-off-by: Sean Nyekjaer <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...

iio: accel: Add driver for Murata SCA3300 accelerometer

Add initial support for Murata SCA3300 3-axis industrial
accelerometer with digital SPI interface. This device also
provides a temperature mea

iio: accel: Add driver for Murata SCA3300 accelerometer

Add initial support for Murata SCA3300 3-axis industrial
accelerometer with digital SPI interface. This device also
provides a temperature measurement.

Datasheet: https://www.murata.com/en-global/products/sensor/accel/sca3300
Signed-off-by: Tomas Melin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>

show more ...