kbuild: use $(src) instead of $(srctree)/$(src) for source directory

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention withou

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:

src := $(obj)

When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.

This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.

To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.

Going forward, the variables used in Makefiles will have the following
meanings:

$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree

Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).

Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>

show more ...

HID: intel-ish-hid: Implement loading firmware from host feature

Starting from the Lunar Lake generation, the ISH firmware has been
divided into two components for better space optimization and incr

HID: intel-ish-hid: Implement loading firmware from host feature

Starting from the Lunar Lake generation, the ISH firmware has been
divided into two components for better space optimization and increased
flexibility. These components include a bootloader that is integrated
into the BIOS, and a main firmware that is stored within the operating
system's file system.

Introduce support for loading ISH main firmware from host. This feature is
applicable for Lunar Lake and later generation.

Current intel-ishtp-loader, is designed for Chrome OS based systems which
uses core boot and has different firmware loading method. For non chrome
systems the ISH firmware loading uses different method.

Key differences include:
1. The new method utilizes ISHTP capability/fixed client to enumerate the
firmware loader function. It does not require a connection or flow control,
unlike the method used in Chrome OS, which is enumerated as an ISHTP
dynamic client driver, necessitating connect/disconnect operations and flow
control.

2. The new method employs a table to describe firmware fragments, which are
sent to ISH in a single operation. Conversely, the Chrome OS method sends
firmware fragments in multiple operations within a loop, sending only one
fragment at a time.

Additionally, address potential error scenarios to ensure graceful failure
handling.
- Firmware Not Found: Triggers if request_firmware() fails, leaving ISH in
a waiting state.
Recovery: Re-insmod the ISH drivers to retry.

- DMA Buffer Allocation Failure: Occurs during prepare_dma_bufs(), leading
to ISH waiting state. Allocated resources are released.
Recovery: Re-insmod the ISH drivers to retry.

- Incorrect Firmware Image: Causes ISH to refuse loading after three failed
attempts.
Recovery: A platform reset is required.

Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst)
for the details on flows.

Signed-off-by: Zhang Lixu <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

show more ...

treewide: prefix header search paths with $(srctree)/

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree

treewide: prefix header search paths with $(srctree)/

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

HID: intel-ish-hid: ISH firmware loader client driver

This driver adds support for loading Intel Integrated Sensor Hub (ISH) firmware
from host file system to ISH SRAM and start execution.

At power

HID: intel-ish-hid: ISH firmware loader client driver

This driver adds support for loading Intel Integrated Sensor Hub (ISH) firmware
from host file system to ISH SRAM and start execution.

At power-on, the ISH subsystem shall boot to an interim Shim loader-firmware,
which shall expose an ISHTP loader device.

The driver implements an ISHTP client that communicates with the Shim ISHTP
loader device over the intel-ish-hid stack, to download the main ISH firmware.

Signed-off-by: Rushikesh S Kadam <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Acked-by: Nick Crews <[email protected]>
Tested-by: Jett Rink <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

HID: intel-ish-hid: ISH HID client driver

This driver is responsible for implementing ISH HID client, which
gets HID description and report. Once it has completely gets
report descriptors, it regist

HID: intel-ish-hid: ISH HID client driver

This driver is responsible for implementing ISH HID client, which
gets HID description and report. Once it has completely gets
report descriptors, it registers as a HID LL drivers. This implements
necessary callbacks so that it can be used by HID sensor hub driver.

Original-author: Daniel Drubin <[email protected]>
Reviewed-and-tested-by: Ooi, Joyce <[email protected]>
Tested-by: Grant Likely <[email protected]>
Tested-by: Rann Bar-On <[email protected]>
Tested-by: Atri Bhattacharya <[email protected]>
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

show more ...

HID: intel-ish-hid: ipc layer

This layer is responsible for
- Enumerating over PCI bus
- Inform FW about host readiness
- Provide HW interface to transport layer for control and messages
- Interrupt

HID: intel-ish-hid: ipc layer

This layer is responsible for
- Enumerating over PCI bus
- Inform FW about host readiness
- Provide HW interface to transport layer for control and messages
- Interrupt handling and routing

Original-author: Daniel Drubin <[email protected]>
Reviewed-and-tested-by: Ooi, Joyce <[email protected]>
Tested-by: Grant Likely <[email protected]>
Tested-by: Rann Bar-On <[email protected]>
Tested-by: Atri Bhattacharya <[email protected]>
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

show more ...

HID: intel_ish-hid: ISH Transport layer

The ISH transport layer (ishtp) is a bi-directional protocol implemented
on the top of PCI based inter processor communication layer. This layer
offers:
- Con

HID: intel_ish-hid: ISH Transport layer

The ISH transport layer (ishtp) is a bi-directional protocol implemented
on the top of PCI based inter processor communication layer. This layer
offers:
- Connection management
- Flow control with the firmware
- Multiple client sessions
- Client message transfer
- Client message reception
- DMA for RX and TX for fast data transfer

Refer to Documentation/hid/intel-ish-hid.txt for
overview of the functionality implemented in this layer.

Original-author: Daniel Drubin <[email protected]>
Reviewed-and-tested-by: Ooi, Joyce <[email protected]>
Tested-by: Grant Likely <[email protected]>
Tested-by: Rann Bar-On <[email protected]>
Tested-by: Atri Bhattacharya <[email protected]>
Signed-off-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

show more ...