gpu: host1x: Rewrite syncpoint interrupt handling

Move from the old, complex intr handling code to a new implementation
based on dma_fences. While there is a fair bit of churn to get there,
the new

gpu: host1x: Rewrite syncpoint interrupt handling

Move from the old, complex intr handling code to a new implementation
based on dma_fences. While there is a fair bit of churn to get there,
the new implementation is much simpler and likely faster as well due
to allowing signaling directly from interrupt context.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Add no-recovery mode

Add a new property for jobs to enable or disable recovery i.e.
CPU increments of syncpoints to max value on job timeout. This
allows for a more solid model for hang

gpu: host1x: Add no-recovery mode

Add a new property for jobs to enable or disable recovery i.e.
CPU increments of syncpoints to max value on job timeout. This
allows for a more solid model for hanged jobs, where userspace
doesn't need to guess if a syncpoint increment happened because
the job completed, or because job timeout was triggered.

On job timeout, we stop the channel, NOP all future jobs on the
channel using the same syncpoint, mark the syncpoint as locked
and resume the channel from the next job, if any.

The future jobs are NOPed, since because we don't do the CPU
increments, the value of the syncpoint is no longer synchronized,
and any waiters would become confused if a future job incremented
the syncpoint. The syncpoint is marked locked to ensure that any
future jobs cannot increment the syncpoint either, until the
application has recognized the situation and reallocated the
syncpoint.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Cleanup and refcounting for syncpoints

Add reference counting for allocated syncpoints to allow keeping
them allocated while jobs are referencing them. Additionally,
clean up various pl

gpu: host1x: Cleanup and refcounting for syncpoints

Add reference counting for allocated syncpoints to allow keeping
them allocated while jobs are referencing them. Additionally,
clean up various places using syncpoint IDs to use host1x_syncpt
pointers instead.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Allow syncpoints without associated client

Syncpoints don't need to be associated with any client,
so remove the property, and expose host1x_syncpt_alloc.
This will allow allocating syn

gpu: host1x: Allow syncpoints without associated client

Syncpoints don't need to be associated with any client,
so remove the property, and expose host1x_syncpt_alloc.
This will allow allocating syncpoints without prior knowledge
of the engine that it will be used with.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Steve Winslow <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

gpu: host1x: Remove wait check support

The job submission userspace ABI doesn't support this and there are no
plans to implement it, so all of this code is dead and can be removed.

Reviewed-by: Dmi

gpu: host1x: Remove wait check support

The job submission userspace ABI doesn't support this and there are no
plans to implement it, so all of this code is dead and can be removed.

Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: syncpt: Request syncpoints per client

Rather than request syncpoints for a struct device *, request them for a
struct host1x_client *. This is important because subsequent patches are
g

gpu: host1x: syncpt: Request syncpoints per client

Rather than request syncpoints for a struct device *, request them for a
struct host1x_client *. This is important because subsequent patches are
going to break the assumption that host1x will always be the parent for
devices requesting a syncpoint. It's also a more natural choice because
host1x clients are really the only ones that will know how to deal with
syncpoints.

Note that host1x clients are always guaranteed to be children of host1x,
regardless of their location in the device tree.

Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Use unsigned int consistently for IDs

IDs can never be negative so use unsigned int. In some instances an
explicitly sized type (such as u32) was used for no particular reason,
so turn

gpu: host1x: Use unsigned int consistently for IDs

IDs can never be negative so use unsigned int. In some instances an
explicitly sized type (such as u32) was used for no particular reason,
so turn those into unsigned int as well for consistency.

Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Consistently use unsigned int for counts

The number of channels, syncpoints, bases and mlocks can never be
negative, so use unsigned int instead of int. Also make loop variables
the sam

gpu: host1x: Consistently use unsigned int for counts

The number of channels, syncpoints, bases and mlocks can never be
negative, so use unsigned int instead of int. Also make loop variables
the same type for consistency.

Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Add syncpoint base support

This patch adds support for hardware syncpoint bases. This creates
a simple mechanism to stall the command FIFO until an operation is
completed.

Signed-off-b

gpu: host1x: Add syncpoint base support

This patch adds support for hardware syncpoint bases. This creates
a simple mechanism to stall the command FIFO until an operation is
completed.

Signed-off-by: Arto Merilainen <[email protected]>
Reviewed-by: Terje Bergstrom <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Expose syncpt and channel functionality

Expose the buffer objects, syncpoint and channel functionality in the
public public header so that drivers can use them.

Signed-off-by: Thierry

gpu: host1x: Expose syncpt and channel functionality

Expose the buffer objects, syncpoint and channel functionality in the
public public header so that drivers can use them.

Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Rework CPU syncpoint increment

This patch merges host1x_syncpt_cpu_incr to host1x_syncpt_incr() as
they are in practise doing the same thing. host1x_syncpt_incr() is
also modified to re

gpu: host1x: Rework CPU syncpoint increment

This patch merges host1x_syncpt_cpu_incr to host1x_syncpt_incr() as
they are in practise doing the same thing. host1x_syncpt_incr() is
also modified to return error codes. User space interface is modified
accordingly to pass return values.

Signed-off-by: Arto Merilainen <[email protected]>
Acked-By: Terje Bergstrom <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Fix client_managed type

client_managed field in syncpoint structure was defined as an
integer. The field holds, however, only a boolean value. This patch
modifies the type to boolean.

gpu: host1x: Fix client_managed type

client_managed field in syncpoint structure was defined as an
integer. The field holds, however, only a boolean value. This patch
modifies the type to boolean.

Signed-off-by: Arto Merilainen <[email protected]>
Acked-By: Terje Bergstrom <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Add channel support

Add support for host1x client modules, and host1x channels to submit
work to the clients.

Signed-off-by: Arto Merilainen <[email protected]>
Signed-off-by: Ter

gpu: host1x: Add channel support

Add support for host1x client modules, and host1x channels to submit
work to the clients.

Signed-off-by: Arto Merilainen <[email protected]>
Signed-off-by: Terje Bergstrom <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Tested-by: Erik Faye-Lund <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Add syncpoint wait and interrupts

Add support for sync point interrupts, and sync point wait. Sync
point wait used interrupts for unblocking wait.

Signed-off-by: Arto Merilainen <ameri

gpu: host1x: Add syncpoint wait and interrupts

Add support for sync point interrupts, and sync point wait. Sync
point wait used interrupts for unblocking wait.

Signed-off-by: Arto Merilainen <[email protected]>
Signed-off-by: Terje Bergstrom <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Tested-by: Erik Faye-Lund <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Add host1x driver

Add host1x, the driver for host1x and its client unit 2D. The Tegra
host1x module is the DMA engine for register access to Tegra's
graphics- and multimedia-related mod

gpu: host1x: Add host1x driver

Add host1x, the driver for host1x and its client unit 2D. The Tegra
host1x module is the DMA engine for register access to Tegra's
graphics- and multimedia-related modules. The modules served by
host1x are referred to as clients. host1x includes some other
functionality, such as synchronization.

Signed-off-by: Arto Merilainen <[email protected]>
Signed-off-by: Terje Bergstrom <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Tested-by: Erik Faye-Lund <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...