gpu: host1x: Do not assume that a NULL domain means no DMA IOMMU

Previously with tegra-smmu, even with CONFIG_IOMMU_DMA, the default domain
could have been left as NULL. The NULL domain is specially

gpu: host1x: Do not assume that a NULL domain means no DMA IOMMU

Previously with tegra-smmu, even with CONFIG_IOMMU_DMA, the default domain
could have been left as NULL. The NULL domain is specially recognized by
host1x_iommu_attach() as meaning it is not the DMA domain and
should be replaced with the special shared domain.

This happened prior to the below commit because tegra-smmu was using the
NULL domain to mean IDENTITY.

Now that the domain is properly labled the test in DRM doesn't see NULL.
Check for IDENTITY as well to enable the special domains.

This is the same issue and basic fix as seen in
commit fae6e669cdc5 ("drm/tegra: Do not assume that a NULL domain means no
DMA IOMMU").

Fixes: c8cc2655cc6c ("iommu/tegra-smmu: Implement an IDENTITY domain")
Reported-by: Diogo Ivo <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Tested-by: Diogo Ivo <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: Fix a use of uninitialized mutex

commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXE

gpu: host1x: Fix a use of uninitialized mutex

commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled.

[ 41.662843] ------------[ cut here ]------------
[ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878
[ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod
[ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1
[ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024
[ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 41.679636] pc : __mutex_lock+0x670/0x878
[ 41.683834] lr : __mutex_lock+0x670/0x878
[ 41.688035] sp : ffff800084b77090
[ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000
[ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000
[ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0
[ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000
[ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3
[ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc
[ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001
[ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000
[ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000
[ 41.764251] Call trace:
[ 41.766695] __mutex_lock+0x670/0x878
[ 41.770373] mutex_lock_nested+0x2c/0x40
[ 41.774134] host1x_intr_start+0x54/0xf8 [host1x]
[ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x]
[ 41.783935] pm_generic_runtime_resume+0x84/0xc8
[ 41.788485] __rpm_callback+0xa0/0x478
[ 41.792422] rpm_callback+0x15c/0x1a8
[ 41.795922] rpm_resume+0x698/0xc08
[ 41.799597] __pm_runtime_resume+0xa8/0x140
[ 41.803621] host1x_probe+0x810/0xbc0 [host1x]
[ 41.807909] platform_probe+0xcc/0x1a8
[ 41.811845] really_probe+0x188/0x800
[ 41.815347] __driver_probe_device+0x164/0x360
[ 41.819810] driver_probe_device+0x64/0x1a8
[ 41.823834] __driver_attach+0x180/0x490
[ 41.827773] bus_for_each_dev+0x104/0x1a0
[ 41.831797] driver_attach+0x44/0x68
[ 41.835296] bus_add_driver+0x23c/0x4e8
[ 41.839235] driver_register+0x15c/0x3a8
[ 41.843170] __platform_register_drivers+0xa4/0x208
[ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x]
[ 41.853147] do_one_initcall+0xd4/0x380
[ 41.856997] do_init_module+0x1dc/0x698
[ 41.860758] load_module+0xc70/0x1300
[ 41.864435] __do_sys_init_module+0x1a8/0x1d0
[ 41.868721] __arm64_sys_init_module+0x74/0xb0
[ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8
[ 41.877997] do_el0_svc+0x154/0x1d0
[ 41.881671] el0_svc+0x54/0x140
[ 41.884820] el0t_64_sync_handler+0x120/0x130
[ 41.889285] el0t_64_sync+0x1a4/0x1a8
[ 41.892960] irq event stamp: 69737
[ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8
[ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198
[ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890
[ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28
[ 41.931289] ---[ end trace 0000000000000000 ]---

Inside the probe function when pm_runtime_enable() is called,
the PM core invokes a resume callback if the device Host1x is
in a suspended state. As it can be seen in the logs above,
this leads to host1x_intr_start() function call which is
trying to acquire a mutex lock. But, the function
host_intr_init() only gets called after the pm_runtime_enable()
where mutex is initialised leading to the use of mutex
prior to its initialisation.

Fix this by moving the mutex initialisation prior to the runtime
PM enablement function pm_runtime_enable() in probe.

Fixes: c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
Signed-off-by: Rupinderjit Singh <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Tested-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/[email protected]/

show more ...

Get rid of 'remove_new' relic from platform driver struct

The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
func

Get rid of 'remove_new' relic from platform driver struct

The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds <[email protected]>

show more ...

gpu: host1x: Fix boot regression for Tegra

Commit 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the f

gpu: host1x: Fix boot regression for Tegra

Commit 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the function host1x_intr_init() now calls
host1x_hw_intr_disable_all_syncpt_intrs() during probe. However,
host1x_intr_init() is called before runtime power-management is enabled
for Host1x and the function host1x_hw_intr_disable_all_syncpt_intrs() is
accessing hardware registers. So if the Host1x hardware is not enabled
prior to probing then the device will now hang on attempting to access
the registers. So far this is only observed on Tegra186, but potentially
could be seen on other devices.

Fix this by moving the call to the function host1x_intr_init() in probe
to after enabling the runtime power-management in the probe and update
the failure path in probe as necessary.

Fixes: 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during probe")
Signed-off-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit dc56f8428e5f34418f3243a60cec13166efe4fdb)
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Fix boot regression for Tegra

Commit 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the f

gpu: host1x: Fix boot regression for Tegra

Commit 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the function host1x_intr_init() now calls
host1x_hw_intr_disable_all_syncpt_intrs() during probe. However,
host1x_intr_init() is called before runtime power-management is enabled
for Host1x and the function host1x_hw_intr_disable_all_syncpt_intrs() is
accessing hardware registers. So if the Host1x hardware is not enabled
prior to probing then the device will now hang on attempting to access
the registers. So far this is only observed on Tegra186, but potentially
could be seen on other devices.

Fix this by moving the call to the function host1x_intr_init() in probe
to after enabling the runtime power-management in the probe and update
the failure path in probe as necessary.

Fixes: 4c27ac45e622 ("gpu: host1x: Request syncpoint IRQs only during probe")
Signed-off-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: Complete stream ID entry tables

These tables contain fixed values to program the host1x hardware
with, so fill in the missing entries.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia

gpu: host1x: Complete stream ID entry tables

These tables contain fixed values to program the host1x hardware
with, so fill in the missing entries.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: Use iommu_paging_domain_alloc()

An iommu domain is allocated in host1x_iommu_attach() and is attached to
host->dev. Use iommu_paging_domain_alloc() to make it explicit.

Signed-off-by:

gpu: host1x: Use iommu_paging_domain_alloc()

An iommu domain is allocated in host1x_iommu_attach() and is attached to
host->dev. Use iommu_paging_domain_alloc() to make it explicit.

Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error h

gpu: host1x: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Acked-by: Thierry Reding <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Link: https://lore.kernel.org/r/7e31909b1e536f0ddbb060b1aaa0a9e943687c8a.1712681770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <[email protected]>

show more ...

gpu: host1x: Add Tegra SE to SID table

Add Tegra Security Engine details to the SID table in host1x driver.
These entries are required to be in place to configure the stream ID
for SE. Register writ

gpu: host1x: Add Tegra SE to SID table

Add Tegra Security Engine details to the SID table in host1x driver.
These entries are required to be in place to configure the stream ID
for SE. Register writes to stream ID registers fail otherwise.

Signed-off-by: Akhil R <[email protected]>
Acked-by: Mikko Perttunen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

gpu: host1x: Skip reset assert on Tegra186

On Tegra186, secure world applications may need to access host1x
during suspend/resume, and rely on the kernel to keep Host1x out
of reset during the suspe

gpu: host1x: Skip reset assert on Tegra186

On Tegra186, secure world applications may need to access host1x
during suspend/resume, and rely on the kernel to keep Host1x out
of reset during the suspend cycle. As such, as a quirk,
skip asserting Host1x's reset on Tegra186.

We don't need to keep the clocks enabled, as BPMP ensures the clock
stays on while Host1x is being used. On newer SoC's, the reset line
is inaccessible, so there is no need for the quirk.

Fixes: b7c00cdf6df5 ("gpu: host1x: Enable system suspend callbacks")
Signed-off-by: Mikko Perttunen <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Tested-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: Syncpoint interrupt sharding

Support sharded syncpoint interrupts on Tegra234+. This feature
allows specifying one of eight interrupt lines for each syncpoint
to lower processing latenc

gpu: host1x: Syncpoint interrupt sharding

Support sharded syncpoint interrupts on Tegra234+. This feature
allows specifying one of eight interrupt lines for each syncpoint
to lower processing latency of syncpoint threshold
interrupts.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: Enable system suspend callbacks

With the previous CDMA stop fix, executing runtime PM ops around
system suspend now makes channel submissions work after system
suspend, so do that.

Sig

gpu: host1x: Enable system suspend callbacks

With the previous CDMA stop fix, executing runtime PM ops around
system suspend now makes channel submissions work after system
suspend, so do that.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: Stop CDMA before suspending

Before going into suspend, wait all CDMA to go idle and stop it.
This will ensure no channel is still active while we enter
suspend, and ensures the driver d

gpu: host1x: Stop CDMA before suspending

Before going into suspend, wait all CDMA to go idle and stop it.
This will ensure no channel is still active while we enter
suspend, and ensures the driver doesn't think that CDMA is still
active when coming back from suspend (as HW state has been reset).

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu/host1x: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of t

gpu/host1x: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: fix uninitialized variable use

The error handling for platform_get_irq() failing no longer
works after a recent change, clang now points this out with
a warning:

drivers/gpu/host1x/dev

gpu: host1x: fix uninitialized variable use

The error handling for platform_get_irq() failing no longer
works after a recent change, clang now points this out with
a warning:

drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~

Fix this by removing the variable and checking the correct
error status.

Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling")
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Mikko Perttunen <[email protected]>
Reported-by: "kernelci.org bot" <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

gpu: host1x: fix uninitialized variable use

The error handling for platform_get_irq() failing no longer works after
a recent change, clang now points this out with a warning:

drivers/gpu/host1x/d

gpu: host1x: fix uninitialized variable use

The error handling for platform_get_irq() failing no longer works after
a recent change, clang now points this out with a warning:

drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~

Fix this by removing the variable and checking the correct error status.

Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Mikko Perttunen <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

gpu: host1x: Rewrite syncpoint interrupt handling

Move from the old, complex intr handling code to a new implementation
based on dma_fences. While there is a fair bit of churn to get there,
the new

gpu: host1x: Rewrite syncpoint interrupt handling

Move from the old, complex intr handling code to a new implementation
based on dma_fences. While there is a fair bit of churn to get there,
the new implementation is much simpler and likely faster as well due
to allowing signaling directly from interrupt context.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Add stream ID register data for NVDEC on Tegra234

Add entries for NVDEC to the Tegra234 SID table.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding

gpu: host1x: Add stream ID register data for NVDEC on Tegra234

Add entries for NVDEC to the Tegra234 SID table.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Avoid trying to use GART on Tegra20

Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with
bus") quite some time ago, the GART driver has effectively disabled
itself to avo

gpu: host1x: Avoid trying to use GART on Tegra20

Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with
bus") quite some time ago, the GART driver has effectively disabled
itself to avoid issues with the GPU driver expecting it to work in ways
that it doesn't. As of commit 57365a04c921 ("iommu: Move bus setup to
IOMMU device registration") that bodge no longer works, but really the
GPU driver should be responsible for its own behaviour anyway. Make the
workaround explicit.

Reported-by: Jon Hunter <[email protected]>
Suggested-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Tested-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Tegra234 device data and headers

Add device data and chip headers for Tegra234.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

gpu: host1x: Allow reset to be missing

Host1x on Tegra234 does not have a software-controllable reset line.
As such, don't bail out if we don't find one in the device tree.

Signed-off-by: Mikko Per

gpu: host1x: Allow reset to be missing

Host1x on Tegra234 does not have a software-controllable reset line.
As such, don't bail out if we don't find one in the device tree.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Program virtualization tables

Program virtualization tables specifying which VMs have access to which
Host1x hardware resources. Programming these has become mandatory in
Tegra234.

For

gpu: host1x: Program virtualization tables

Program virtualization tables specifying which VMs have access to which
Host1x hardware resources. Programming these has become mandatory in
Tegra234.

For now, since the driver does not operate as a Host1x hypervisor, we
basically allow access to everything to everyone.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Simplify register mapping and add common aperture

Refactor 'regs' property loading using devm_platform_ioremap_*
and add loading of the 'common' region found on Tegra234.

Signed-off-by

gpu: host1x: Simplify register mapping and add common aperture

Refactor 'regs' property loading using devm_platform_ioremap_*
and add loading of the 'common' region found on Tegra234.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Add context device management code

Add code to register context devices from device tree, allocate them
out and manage their refcounts.

Signed-off-by: Mikko Perttunen <mperttunen@nvidi

gpu: host1x: Add context device management code

Add code to register context devices from device tree, allocate them
out and manage their refcounts.

Signed-off-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

gpu: host1x: Fix a memory leak in 'host1x_remove()'

Add a missing 'host1x_channel_list_free()' call in the remove function,
as already done in the error handling path of the probe function.

Fixes:

gpu: host1x: Fix a memory leak in 'host1x_remove()'

Add a missing 'host1x_channel_list_free()' call in the remove function,
as already done in the error handling path of the probe function.

Fixes: 8474b02531c4 ("gpu: host1x: Refactor channel allocation code")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...