drm/tegra: Run DRM default client setup

Rework fbdev probing to support fbdev_probe in struct drm_driver
and remove the old fb_probe callback. Provide an initializer macro
for struct drm_driver that

drm/tegra: Run DRM default client setup

Rework fbdev probing to support fbdev_probe in struct drm_driver
and remove the old fb_probe callback. Provide an initializer macro
for struct drm_driver that sets the callback according to the kernel
configuration.

Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.

The tegra driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.

v5:
- select DRM_CLIENT_SELECTION

Signed-off-by: Thomas Zimmermann <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mikko Perttunen <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Acked-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.

Suggested-by: Maxime Ripard <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"

This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
conv

Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"

This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Switch DRM_DISPLAY_DP_AUX_BUS to depends on"

This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper
code should always be selected by the driver that needs it, for the

Revert "drm: Switch DRM_DISPLAY_DP_AUX_BUS to depends on"

This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Switch DRM_DISPLAY_DP_HELPER to depends on"

This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
c

Revert "drm: Switch DRM_DISPLAY_DP_HELPER to depends on"

This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on"

This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the

Revert "drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on"

This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/bd288a5943dab8609f2d1f2bf413595a61df727a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some

drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDMI_HELPER to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_DP_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some de

drm: Switch DRM_DISPLAY_DP_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_DP_AUX_BUS to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some d

drm: Switch DRM_DISPLAY_DP_AUX_BUS to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_AUX_BUS to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depen

drm: Switch DRM_DISPLAY_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/display: Make DisplayPort AUX bus Kconfig name consistent

While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort AUX bus implementation uses DRM_DP_AUX_BUS.

Sin

drm/display: Make DisplayPort AUX bus Kconfig name consistent

While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort AUX bus implementation uses DRM_DP_AUX_BUS.

Since the number of users is limited and it's a selected symbol, we can
easily rename it to make it consistent.

Reviewed-by: Jani Nikula <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

fbdev: Use _DMAMEM_ infix for DMA-memory helpers

Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform

fbdev: Use _DMAMEM_ infix for DMA-memory helpers

Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Helge Deller <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/tegra: Use fbdev DMA helpers

Use fbdev's DMA helpers for fbdev emulation. They are equivalent to the
previously used system-memory helpers, so no functional changes here.

Signed-off-by: Thomas

drm/tegra: Use fbdev DMA helpers

Use fbdev's DMA helpers for fbdev emulation. They are equivalent to the
previously used system-memory helpers, so no functional changes here.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mikko Perttunen <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/tegra: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Tegra does not use damage handling, so DRM's fbdev helpers
are mere wrappers arou

drm/tegra: Use regular fbdev I/O helpers

Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Tegra does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.

By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.

v4:
* use initializer macros for struct fb_ops
v2:
* use FB_SYS_HELPERS option

Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mikko Perttunen <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/tegra: Allow compile test on !ARM v2

This compile tests on x86 just perfectly fine.

v2: fix missing include complained by kernel test robot

Signed-off-by: Christian König <christian.koenig@amd

drm/tegra: Allow compile test on !ARM v2

This compile tests on x86 just perfectly fine.

v2: fix missing include complained by kernel test robot

Signed-off-by: Christian König <[email protected]>
CC: Thierry Reding <[email protected]>
CC: Jonathan Hunter <[email protected]>
CC: [email protected]
Signed-off-by: Thierry Reding <[email protected]>

show more ...

drm/display: Move SCDC helpers into display-helper library

SCDC is the Status and Control Data Channel for HDMI. Move the SCDC
helpers into display/ and split the header into files for core and
help

drm/display: Move SCDC helpers into display-helper library

SCDC is the Status and Control Data Channel for HDMI. Move the SCDC
helpers into display/ and split the header into files for core and
helpers. Update all affected drivers. No functional changes.

To avoid the proliferation of Kconfig options, SCDC is part of DRM's
support for HDMI. If necessary, a new option could make SCDC an
independent feature.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/display: Introduce a DRM display-helper module

Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Upda

drm/display: Introduce a DRM display-helper module

Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Update all related Kconfig and Makefile rules.

Besides the existing code for DisplayPort, the new module will
contain helpers for other video-output standards, such as HDMI.
Drivers will have to select their required video-output helpers.

Linking all display-related code into a single module avoids the
proliferation of small kernel modules.

The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz,
and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace
to drm_display_helper.

v2:
* mention module parameters in commit message (Javier)
* distiguish between display module and DP support in Kconfig
* update Makefile rules for DP helpers
* move Kconfig rules into separate file under display/

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/tegra: dpaux: Populate AUX bus

The DPAUX hardware block exposes an DP AUX interface that provides
access to an AUX bus and the devices on that bus. Use the DP AUX bus
infrastructure that was rec

drm/tegra: dpaux: Populate AUX bus

The DPAUX hardware block exposes an DP AUX interface that provides
access to an AUX bus and the devices on that bus. Use the DP AUX bus
infrastructure that was recently introduced to probe devices on this
bus from DT.

Signed-off-by: Thierry Reding <[email protected]>

show more ...

drm/dp: Move DisplayPort helpers into separate helper module

Move DisplayPort functions into a separate module to reduce the size
of the KMS helpers. Select DRM_DP_HELPER for all users of the code.

drm/dp: Move DisplayPort helpers into separate helper module

Move DisplayPort functions into a separate module to reduce the size
of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To
avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c

This change can help to reduce the size of the kernel binary. Some
numbers from a x86-64 test build:

Before:
drm_kms_helper.ko: 447480 bytes

After:
drm_dp_helper.ko: 216632 bytes
drm_kms_helper.ko: 239424 bytes

For early-boot graphics, generic DRM drivers, such as simpledrm,
require DRM KMS helpers to be built into the kernel. Generic helper
functions for DisplayPort take up a significant portion of DRM KMS
helper library. These functions are not used by generic drivers and
can be loaded as a module.

v3:
* fix include statement in DRM selftests
v2:
* move DP helper code into dp/ (Jani)

Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Lyude Paul <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/tegra: hdmi: Register audio CODEC on Tegra20

Tegra20 SoC supports only S/PDIF source for HDMI audio. Register ASoC HDMI
S/PDIF CODEC for Tegra20, it will be linked with the S/PDIF CPU DAI.

Sign

drm/tegra: hdmi: Register audio CODEC on Tegra20

Tegra20 SoC supports only S/PDIF source for HDMI audio. Register ASoC HDMI
S/PDIF CODEC for Tegra20, it will be linked with the S/PDIF CPU DAI.

Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

drm/tegra: dc: Support memory bandwidth management

Display controller (DC) performs isochronous memory transfers, and thus,
has a requirement for a minimum memory bandwidth that shall be fulfilled,

drm/tegra: dc: Support memory bandwidth management

Display controller (DC) performs isochronous memory transfers, and thus,
has a requirement for a minimum memory bandwidth that shall be fulfilled,
otherwise framebuffer data can't be fetched fast enough and this results
in a DC's data-FIFO underflow that follows by a visual corruption.

The Memory Controller drivers provide facility for memory bandwidth
management via interconnect API. Let's wire up the interconnect API
support to the DC driver in order to fix the distorted display output
on T30 Ouya, T124 TK1 and other Tegra devices.

Tested-by: Peter Geis <[email protected]> # Ouya T30
Tested-by: Matt Merhar <[email protected]> # Ouya T30
Tested-by: Nicolas Chauvet <[email protected]> # PAZ00 T20 and TK1 T124
Signed-off-by: Dmitry Osipenko <[email protected]>
[[email protected]: unbreak Tegra186+ display support]
Signed-off-by: Thierry Reding <[email protected]>

show more ...

drm/tegra: Unconditionally select IOMMU_IOVA

Currently configurations can be generated where IOMMU_SUPPORT is
disabled but IOMMU_IOVA is built as a module and DRM_TEGRA as built-in.
In such a case,

drm/tegra: Unconditionally select IOMMU_IOVA

Currently configurations can be generated where IOMMU_SUPPORT is
disabled but IOMMU_IOVA is built as a module and DRM_TEGRA as built-in.
In such a case, the symbols guarded by IOMMU_IOVA will not be available
when linking the Tegra DRM driver and cause a linking failure.

Simplify this by unconditionally selecting IOMMU_IOVA, which makes sure
that it will be forced to =y if DRM_TEGRA=y. Technically we can now get
IOMMU_IOVA code built-in even if we don't use it (Tegra DRM only uses it
when IOMMU_SUPPORT is also enabled), but such configuration are of a
mostly academic nature. In all practical configurations we want IOMMU
support anyway.

Signed-off-by: Thierry Reding <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drm/tegra: hdmi: Add cec-notifier support

In order to support CEC the HDMI driver has to inform the CEC driver
whenever the physical address changes. So when the EDID is read the
CEC driver has to b

drm/tegra: hdmi: Add cec-notifier support

In order to support CEC the HDMI driver has to inform the CEC driver
whenever the physical address changes. So when the EDID is read the
CEC driver has to be informed and whenever the hotplug detect goes
away.

This is done through the cec-notifier framework.

The link between the HDMI driver and the CEC driver is done through
the hdmi-phandle property in the tegra-cec node in the device tree.

Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

drm/tegra: Add CONFIG_OF dependency

Without CONFIG_OF, we can run into a build error:

drivers/gpu/drm/tegra/dpaux.c:378:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a f

drm/tegra: Add CONFIG_OF dependency

Without CONFIG_OF, we can run into a build error:

drivers/gpu/drm/tegra/dpaux.c:378:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function); did you mean 'pinconf_generic_params'?
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pinconf_generic_params
drivers/gpu/drm/tegra/dpaux.c:379:17: error: 'pinconf_generic_dt_free_map' undeclared here (not in a function); did you mean 'pinconf_generic_params'?

This adds an explicit dependency.

Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...