drm/rockchip: Add MIPI DSI2 glue driver for RK3588

This adds the glue code for the MIPI DSI2 bridge on Rockchip SoCs and
enables its use on the RK3588.

Right now the DSI2 controller is always paire

drm/rockchip: Add MIPI DSI2 glue driver for RK3588

This adds the glue code for the MIPI DSI2 bridge on Rockchip SoCs and
enables its use on the RK3588.

Right now the DSI2 controller is always paired with a DC-phy based on a
Samsung IP, so the interface values are set statically for now.
This stays true for the upcoming RK3576 as well.

Tested-by: Daniel Semkowicz <[email protected]>
Tested-by: Dmitry Yashin <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Andy Yan <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/rockchip: Add basic RK3588 HDMI output support

The RK3588 SoC family integrates the newer Synopsys DesignWare HDMI 2.1
Quad-Pixel (QP) TX controller IP and a HDMI/eDP TX Combo PHY based on a
Sam

drm/rockchip: Add basic RK3588 HDMI output support

The RK3588 SoC family integrates the newer Synopsys DesignWare HDMI 2.1
Quad-Pixel (QP) TX controller IP and a HDMI/eDP TX Combo PHY based on a
Samsung IP block.

Add just the basic support for now, i.e. RGB output up to 4K@60Hz,
without audio, CEC or any of the HDMI 2.1 specific features.

Co-developed-by: Algea Cao <[email protected]>
Signed-off-by: Algea Cao <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Reviewed-by: Maxime Ripard <[email protected]>
Signed-off-by: Cristian Ciocaltea <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016-b4-rk3588-bridge-upstream-v10-3-87ef92a6d14e@collabora.com
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/rockchip: Add VOP2 driver

The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.

This driver has been derived from the

drm/rockchip: Add VOP2 driver

The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.

This driver has been derived from the downstream Rockchip Kernel and
heavily modified:

- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs

The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.

Signed-off-by: Andy Yan <[email protected]>
Co-Developed-by: Sascha Hauer <[email protected]>
Signed-off-by: Sascha Hauer <[email protected]>
Tested-by: Michael Riesch <[email protected]>
[dt-binding-header:]
Acked-by: Rob Herring <[email protected]>
[moved dt-binding header from dt-nodes patch to here
and made checkpatch --strict happier]
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/rockchip: Make VOP driver optional

With upcoming VOP2 support VOP won't be the only choice anymore, so make
the VOP driver optional.

This also adds a dependency from ROCKCHIP_ANALOGIX_DP to ROC

drm/rockchip: Make VOP driver optional

With upcoming VOP2 support VOP won't be the only choice anymore, so make
the VOP driver optional.

This also adds a dependency from ROCKCHIP_ANALOGIX_DP to ROCKCHIP_VOP,
because that driver currently only links and works with the VOP driver.

Signed-off-by: Sascha Hauer <[email protected]>
Tested-by: Michael Riesch <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/rockchip: use generic fbdev setup

The Rockchip fbdev code does not add anything compared to
drm_fbdev_generic_setup(); the one custom function for .fb_mmap does the
same thing as gem_prime_mmap

drm/rockchip: use generic fbdev setup

The Rockchip fbdev code does not add anything compared to
drm_fbdev_generic_setup(); the one custom function for .fb_mmap does the
same thing as gem_prime_mmap which is called by the helper.

Signed-off-by: John Keeping <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/rockchip: Use the helpers for PSR

Instead of rolling our own implementation for tracking when PSR should
be [in]active, use the new self refresh helpers to do the heavy lifting.

Changes in v2:

drm/rockchip: Use the helpers for PSR

Instead of rolling our own implementation for tracking when PSR should
be [in]active, use the new self refresh helpers to do the heavy lifting.

Changes in v2:
- updated to reflect changes made in the helpers
Changes in v3:
- use the new atomic hooks to inspect crtc state instead of needing conn state (Daniel)
Changes in v4:
- Use Laurent's get_new_connector_for_encoder helper (Daniel)
- Exit vop disable early if it's already off
Changes in v5:
- Rebase on latest drm-misc-next
- Resolve conflict with s/edp_vsc_psr/dp_sdp/ rename
- Resolve conflict with drm_atomic.h header inclusion

Link to v1: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link to v2: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link to v3: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link to v4: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Cc: Zain Wang <[email protected]>
Cc: Tomasz Figa <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
[seanpaul resolved some conflicts with drmP.h work and Helen's async fixes]
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm: rockchip: introduce rk3066 hdmi

The RK3066 HDMI TX serves as interface between a LCD Controller and
a HDMI bus. A HDMI TX consists of one HDMI transmitter controller and
one HDMI transmitter PH

drm: rockchip: introduce rk3066 hdmi

The RK3066 HDMI TX serves as interface between a LCD Controller and
a HDMI bus. A HDMI TX consists of one HDMI transmitter controller and
one HDMI transmitter PHY. The interface has three (3) 8-bit data channels
which can be configured for a number of bus widths (8/10/12/16/20/24-bit)
and different video formats (RGB, YCbCr).

Features:
HDMI version 1.4a, HDCP revision 1.4 and
DVI version 1.0 compliant transmitter.
Supports DTV resolutions from 480i to 1080i/p HD.
Master I2C interface for a DDC connection.
HDMI TX supports multiple power save modes.
The HDMI TX input can switch between LCDC0 and LCDC1.
(Sound support is not included in this patch)

Signed-off-by: Zheng Yang <[email protected]>
Signed-off-by: Johan Jonker <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver

Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge and remove the old separate one.

drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver

Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge and remove the old separate one.

changes:

v2:
add err_pllref, remove unnecessary encoder.enable & disable
correct spelling mistakes
v3:
call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind()
fix typo, use of_device_get_match_data(),
change some bind() logic into probe()
add 'dev_set_drvdata()'
v4:
return -EINVAL when can not get best_freq
add a clarifying comment when get vco
add review tag
v5:
keep our power domain enabled while touching GRF
v6:
change func name dw_mipi_encoder_disable to
dw_mipi_dsi_encoder_disable
v7:
none
v8: Heiko
add Archit's Review tag
adapt to recent changes in the original rockchip-dsi driver
beautify grf-handling
split hw-setup (resources, dsi-host) from bind into probe
v2-new: Heiko
add SPDX header instead of license blurb
drop old versioning to not confuse people
v3-new: Heiko
include ordering
moved hwaccess from mode_set to enable callback
move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps)
v4-new: Heiko
rebase against recent rockchip-dsi changes
move to call component_add in the new glue host-attach

Signed-off-by: Nickey Yang <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Reviewed-by: Archit Taneja <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/rockchip: Add support for Rockchip Soc RGB output interface

Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel
and serial RGB data to panel or conversion chip.

So add a fea

drm/rockchip: Add support for Rockchip Soc RGB output interface

Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel
and serial RGB data to panel or conversion chip.

So add a feature-bit for vops to mark the ability for these direct
outputs and add an internal encoder in that case, that can attach to
bridge chipsor panels.

Changes in v7:
1. forget to delete rockchip_rgb_driver and delete it.
Changes in v6:
1. Update according to Heiko Stuebner' implemention, rgb output is
part of vop's feature, should not register as a independent
driver.
Changes in v5:
1. add SPDX-License-Identifier tag
Changes in v4:
1. add support px30;
Changes in v3:
1. update for rgb-mode move to panel node.
Changes in v2:
1. add error log when probe failed;
2. update name_to_output_mode() according to sean's suggest;
3. Fix uninitialized use of ret.

Signed-off-by: Sandy Huang <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drm/rockchip: Add support for Rockchip Soc LVDS

This adds support for Rockchip soc lvds found on rk3288
Based on the patches from Mark yao and Heiko Stuebner.

Signed-off-by: Mark Yao <mark.yao@rock

drm/rockchip: Add support for Rockchip Soc LVDS

This adds support for Rockchip soc lvds found on rk3288
Based on the patches from Mark yao and Heiko Stuebner.

Signed-off-by: Mark Yao <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sandy Huang <[email protected]>
Reviewed-by: Mark Yao <[email protected]>
Tested-by: Wadim Egorov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Mark Yao <[email protected]>

show more ...

drm/rockchip: Refactor the component match logic.

Currently we are adding all components from the dts, if one of their
drivers been disabled, we would not be able to bring up others.

Refactor compo

drm/rockchip: Refactor the component match logic.

Currently we are adding all components from the dts, if one of their
drivers been disabled, we would not be able to bring up others.

Refactor component match logic, follow exynos drm.

Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Acked-by: Mark Yao <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/rockchip: cdn-dp: add cdn DP support for rk3399

Add support for cdn DP controller which is embedded in the rk3399
SoCs. The DP is compliant with DisplayPort Specification,
Version 1.3, This IP i

drm/rockchip: cdn-dp: add cdn DP support for rk3399

Add support for cdn DP controller which is embedded in the rk3399
SoCs. The DP is compliant with DisplayPort Specification,
Version 1.3, This IP is compatible with the rockchip type-c PHY IP.
There is a uCPU in DP controller, it need a firmware to work,
please put the firmware file to /lib/firmware/rockchip/dptx.bin. The
uCPU in charge of aux communication and link training, the host use
mailbox to communicate with the ucpu.
The dclk pin_pol of vop must not be invert for DP.

Signed-off-by: Chris Zhong <[email protected]>
[seanpaul fixed up some races between the worker and modeset]
[seanpaul squashed ~15 commits from chromium.org gerrit]
Signed-off-by: Sean Paul <[email protected]>
[groeck fixed compilation errors when building as module]
Signed-off-by: Guenter Roeck <[email protected]>

show more ...

drm/rockchip: add an common abstracted PSR driver

The PSR driver have exported four symbols for specific device driver, and
it's safe to call them in interrupt context:
- rockchip_drm_psr_register()

drm/rockchip: add an common abstracted PSR driver

The PSR driver have exported four symbols for specific device driver, and
it's safe to call them in interrupt context:
- rockchip_drm_psr_register()
- rockchip_drm_psr_unregister()
- rockchip_drm_psr_enable()
- rockchip_drm_psr_disable()
- rockchip_drm_psr_flush()

Encoder driver should call the register/unregister interfaces to hook
itself into common PSR driver, encoder have implement the 'psr_set'
callback which use the set PSR state in hardware side.

Crtc driver would call the enable/disable interfaces when vblank is
enable/disable, after that the common PSR driver would call the encoder
registered callback to set the PSR state.

Fb driver would call the flush interface in 'fb->dirty' callback, this
helper function would force all PSR enabled encoders to exit from PSR
for 3 seconds.

Signed-off-by: Yakir Yang <[email protected]>
[seanpaul removed leftover psr_enabled/psr_work kruft from drm_vop.c]
Signed-off-by: Sean Paul <[email protected]>

show more ...

drm: rockchip: dp: add rockchip platform dp driver

Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform d

drm: rockchip: dp: add rockchip platform dp driver

Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.

Acked-by: Mark Yao <[email protected]>
Tested-by: Caesar Wang <[email protected]>
Tested-by: Douglas Anderson <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Signed-off-by: Yakir Yang <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>

show more ...

drm/rockchip: hdmi: add Innosilicon HDMI support

The Innosilicon HDMI is a low power HDMI 1.4 transmitter
IP, and it have been integrated on some rockchip CPUs
(like RK3036, RK312x).

Signed-off-by:

drm/rockchip: hdmi: add Innosilicon HDMI support

The Innosilicon HDMI is a low power HDMI 1.4 transmitter
IP, and it have been integrated on some rockchip CPUs
(like RK3036, RK312x).

Signed-off-by: Yakir Yang <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>

show more ...

drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATION

If DRM_FBDEV_EMULATION is not selected in the config then we can save a
bit of space by not including the framebuffer code.

Signed-off-by: John Keep

drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATION

If DRM_FBDEV_EMULATION is not selected in the config then we can save a
bit of space by not including the framebuffer code.

Signed-off-by: John Keeping <[email protected]>

show more ...

drm/rockchip: Don't build rockchip_drm_vop as modules

rockchip_drm_vop's module init had moved to rockchip_vop_reg.c
so no need to build rockchip_drm_vop.ko

Signed-off-by: Mark Yao <mark.yao@rock-c

drm/rockchip: Don't build rockchip_drm_vop as modules

rockchip_drm_vop's module init had moved to rockchip_vop_reg.c
so no need to build rockchip_drm_vop.ko

Signed-off-by: Mark Yao <[email protected]>

show more ...

drm: rockchip: Support Synopsys DW MIPI DSI

Add support for Synopsys DesignWare MIPI DSI controller which is
embedded in the rk3288 SoCs.

Signed-off-by: Chris Zhong <[email protected]>
Acked-by: M

drm: rockchip: Support Synopsys DW MIPI DSI

Add support for Synopsys DesignWare MIPI DSI controller which is
embedded in the rk3288 SoCs.

Signed-off-by: Chris Zhong <[email protected]>
Acked-by: Mark Yao <[email protected]>

show more ...

drm/rockchip: vop: spilt register related into rockchip_reg_vop.c

No functional updates. Spilt register related into another file
would be nice to multi vop driver,

Signed-off-by: Mark Yao <mark.ya

drm/rockchip: vop: spilt register related into rockchip_reg_vop.c

No functional updates. Spilt register related into another file
would be nice to multi vop driver,

Signed-off-by: Mark Yao <[email protected]>

show more ...

drm: bridge/dw_hdmi: add rockchip rk3288 support

Rockchip RK3288 hdmi is compatible with dw_hdmi

Signed-off-by: Andy Yan <[email protected]>
Tested-by: Russell King <[email protected].

drm: bridge/dw_hdmi: add rockchip rk3288 support

Rockchip RK3288 hdmi is compatible with dw_hdmi

Signed-off-by: Andy Yan <[email protected]>
Tested-by: Russell King <[email protected]>
Acked-by: Russell King <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>

show more ...

drm: rockchip: Add basic drm driver

This patch adds the basic structure of a DRM Driver for Rockchip Socs.

Signed-off-by: Mark Yao <[email protected]>
Signed-off-by: Daniel Kurtz <djkurtz@chr

drm: rockchip: Add basic drm driver

This patch adds the basic structure of a DRM Driver for Rockchip Socs.

Signed-off-by: Mark Yao <[email protected]>
Signed-off-by: Daniel Kurtz <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Rob Clark <[email protected]>

show more ...