i915: fix DRM_I915_GVT_KVMGT dependencies

Depending on x86 and KVM is not enough, as the kvm helper functions
that get called here are controlled by CONFIG_KVM_X86, which is
disabled if both KVM_INT

i915: fix DRM_I915_GVT_KVMGT dependencies

Depending on x86 and KVM is not enough, as the kvm helper functions
that get called here are controlled by CONFIG_KVM_X86, which is
disabled if both KVM_INTEL and KVM_AMD are turned off.

ERROR: modpost: "kvm_write_track_remove_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_register_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_unregister_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_write_track_add_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!

Change the dependency to CONFIG_KVM_X86 instead.

Fixes: ea4290d77bda ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 341e4023032fba6c02326bfc6babd63ef4039712)
Signed-off-by: Joonas Lahtinen <[email protected]>

show more ...

drm/i915: Select DRM_CLIENT_SELECTION

The Kconfig token DRM_CLIENT_SELECTION will make DRM clients
available to drivers. Select it from i915.

Signed-off-by: Thomas Zimmermann <[email protected]>

drm/i915: Select DRM_CLIENT_SELECTION

The Kconfig token DRM_CLIENT_SELECTION will make DRM clients
available to drivers. Select it from i915.

Signed-off-by: Thomas Zimmermann <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

i915: fix DRM_I915_GVT_KVMGT dependencies

Depending on x86 and KVM is not enough, as the kvm helper functions
that get called here are controlled by CONFIG_KVM_X86, which is
disabled if both KVM_INT

i915: fix DRM_I915_GVT_KVMGT dependencies

Depending on x86 and KVM is not enough, as the kvm helper functions
that get called here are controlled by CONFIG_KVM_X86, which is
disabled if both KVM_INTEL and KVM_AMD are turned off.

ERROR: modpost: "kvm_write_track_remove_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_register_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_unregister_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_write_track_add_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!

Change the dependency to CONFIG_KVM_X86 instead.

Fixes: ea4290d77bda ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>

show more ...

drm/display: split DSC helpers from DP helpers

Currently the DRM DSC functions are selected by the
DRM_DISPLAY_DP_HELPER Kconfig symbol. This is not optimal, since the DSI
code (both panel and host

drm/display: split DSC helpers from DP helpers

Currently the DRM DSC functions are selected by the
DRM_DISPLAY_DP_HELPER Kconfig symbol. This is not optimal, since the DSI
code (both panel and host drivers) end up selecting the seemingly
irrelevant DP helpers. Split the DSC code to be guarded by the separate
DRM_DISPLAY_DSC_HELPER Kconfig symbol.

Reviewed-by: Jessica Zhang <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Acked-by: Rodrigo Vivi <[email protected]> #i915
Acked-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>

show more ...

drm/i915: do not select ACPI_BUTTON

We stopped using ACPI button in commit 05c72e77ccda ("drm/i915: Nuke the
LVDS lid notifier"). Also stop force enabling the ACPI_BUTTON config.

Cc: Ville Syrjälä

drm/i915: do not select ACPI_BUTTON

We stopped using ACPI button in commit 05c72e77ccda ("drm/i915: Nuke the
LVDS lid notifier"). Also stop force enabling the ACPI_BUTTON config.

Cc: Ville Syrjälä <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/060d687c3a80cd94f065e637200dd10fea7b979f.1717747542.git.jani.nikula@intel.com

show more ...

Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"

This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
conv

Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"

This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Switch DRM_DISPLAY_DP_HELPER to depends on"

This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
c

Revert "drm: Switch DRM_DISPLAY_DP_HELPER to depends on"

This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Switch DRM_DISPLAY_HDCP_HELPER to depends on"

This reverts commit 3166e7e6d935caaef07605a5c90773fbf9ffeaf4, as helper
code should always be selected by the driver that needs it, for the

Revert "drm: Switch DRM_DISPLAY_HDCP_HELPER to depends on"

This reverts commit 3166e7e6d935caaef07605a5c90773fbf9ffeaf4, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/a40e70a0abd3d841c23c107d452a43fdd70ef37a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

Revert "drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on"

This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the

Revert "drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on"

This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.

The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/bd288a5943dab8609f2d1f2bf413595a61df727a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some

drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDMI_HELPER to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_HDCP_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some

drm: Switch DRM_DISPLAY_HDCP_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDCP_HELPER to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_DP_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some de

drm: Switch DRM_DISPLAY_DP_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm: Switch DRM_DISPLAY_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depen

drm: Switch DRM_DISPLAY_HELPER to depends on

Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.

Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.

Reviewed-by: Jani Nikula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>

show more ...

drm/i915/dp: Add support for DP tunnel BW allocation

Add support to enable the DP tunnel BW allocation mode. Follow-up
patches will call the required helpers added here to prepare for a
modeset on a

drm/i915/dp: Add support for DP tunnel BW allocation

Add support to enable the DP tunnel BW allocation mode. Follow-up
patches will call the required helpers added here to prepare for a
modeset on a link with DP tunnels, the last change in the patchset
actually enabling BWA.

With BWA enabled, the driver will expose the full mode list a display
supports, regardless of any BW limitation on a shared (Thunderbolt)
link. Such BW limits will be checked against only during a modeset, when
the driver has the full knowledge of each display's BW requirement.

If the link BW changes in a way that a connector's modelist may also
change, userspace will get a hotplug notification for all the connectors
sharing the same link (so it can adjust the mode used for a display).

The BW limitation can change at any point, asynchronously to modesets
on a given connector, so a modeset can fail even though the atomic check
for it passed. In such scenarios userspace will get a bad link
notification and in response is supposed to retry the modeset.

v2:
- Fix old vs. new connector state in intel_dp_tunnel_atomic_check_state().
(Ville)
- Fix propagating the error from
intel_dp_tunnel_atomic_compute_stream_bw(). (Ville)
- Move tunnel==NULL checks from driver to DRM core helpers. (Ville)
- Simplify return flow from intel_dp_tunnel_detect(). (Ville)
- s/dp_tunnel_state/inherited_dp_tunnels (Ville)
- Simplify struct intel_dp_tunnel_inherited_state. (Ville)
- Unconstify object pointers (vs. states) where possible. (Ville)
- Init crtc_state while declaring it in check_group_state(). (Ville)
- Join obj->base.id, obj->name arg lines in debug prints to reduce LOC.
(Ville)
- Add/rework intel_dp_tunnel_atomic_alloc_bw() to prepare for moving the
BW allocation from encoder hooks up to intel_atomic_commit_tail()
later in the patchset.
- Disable BW alloc mode during system suspend.
- Allocate the required BW for all tunnels during system resume.
- Add intel_dp_tunnel_atomic_clear_stream_bw() instead of the open-coded
sequence in a follow-up patch.
- Add function documentation to all exported functions.
- Add CONFIG_USB4 dependency to CONFIG_DRM_I915_DP_TUNNEL.

v3:
- Rebase on intel_dp_get_active_pipes() change in previous patch.

Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/i915: Replace dead 01.org link

01.org is dead so replace old gvt link with current wiki page.

Acked-by: Jani Nikula <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Sign

drm/i915: Replace dead 01.org link

01.org is dead so replace old gvt link with current wiki page.

Acked-by: Jani Nikula <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/i915: update in-source bug filing URLs

The bug filing documentation has been moved from the gitlab wiki to
gitlab pages at https://drm.pages.freedesktop.org/intel-docs/.

Cc: Joonas Lahtinen <jo

drm/i915: update in-source bug filing URLs

The bug filing documentation has been moved from the gitlab wiki to
gitlab pages at https://drm.pages.freedesktop.org/intel-docs/.

Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

fbdev: Use _IOMEM_ infix for I/O-memory helpers

Change the infix for fbdev's I/O-memory helpers from _IO_ to _IOMEM_
to distiguish them from other types of I/O, such as file operations.
The helpers

fbdev: Use _IOMEM_ infix for I/O-memory helpers

Change the infix for fbdev's I/O-memory helpers from _IO_ to _IOMEM_
to distiguish them from other types of I/O, such as file operations.
The helpers operate on memory ranges in the I/O address space and the
naming should make this clear. Adapt all users. No functional changes.

Suggested-by: Helge Deller <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Helge Deller <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/i915: Implement dedicated fbdev I/O helpers

Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the fbde

drm/i915: Implement dedicated fbdev I/O helpers

Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the fbdev callbacks. i915 was the only
caller of the DRM helpers, so remove them from the helper module.

i915's fbdev emulation is still incomplete as it doesn't implement
deferred I/O and damage handling for mmaped pages.

v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_IO_HELPERS options

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: "Ville Syrjälä" <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/i915: taint kernel when force probing unsupported devices

For development and testing purposes, the i915.force_probe module
parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of
dev

drm/i915: taint kernel when force probing unsupported devices

For development and testing purposes, the i915.force_probe module
parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of
devices that aren't supported by the driver.

The i915.force_probe module parameter is "unsafe" and setting it taints
the kernel. However, using the kconfig option does not.

Always taint the kernel when force probing a device that is not
supported.

v2: Drop "depends on EXPERT" to avoid build breakage (kernel test robot)

Fixes: 7ef5ef5cdead ("drm/i915: add force_probe module parameter to replace alpha_support")
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3312bb4ad09ca6423bd4a5b15a94588a8962fb8e)
Signed-off-by: Joonas Lahtinen <[email protected]>

show more ...

drm/i915: taint kernel when force probing unsupported devices

For development and testing purposes, the i915.force_probe module
parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of
dev

drm/i915: taint kernel when force probing unsupported devices

For development and testing purposes, the i915.force_probe module
parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of
devices that aren't supported by the driver.

The i915.force_probe module parameter is "unsafe" and setting it taints
the kernel. However, using the kconfig option does not.

Always taint the kernel when force probing a device that is not
supported.

v2: Drop "depends on EXPERT" to avoid build breakage (kernel test robot)

Fixes: 7ef5ef5cdead ("drm/i915: add force_probe module parameter to replace alpha_support")
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dave Airlie <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/i915: remove unused config DRM_I915_UNSTABLE

Essentially this is a revert of commit d9d54a530a70 ("drm/i915: Put
future HW and their uAPIs under STAGING & BROKEN").

We currently have no users f

drm/i915: remove unused config DRM_I915_UNSTABLE

Essentially this is a revert of commit d9d54a530a70 ("drm/i915: Put
future HW and their uAPIs under STAGING & BROKEN").

We currently have no users for this config option. The last one was
removed in commit 8c26491f5853 ("drm/i915: Kill the fake lmem
support"). Drop it altogether; it's easy enough to resurrect if need
arises.

Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/i915: move a Kconfig symbol to unbreak the menu presentation

Inserting a Kconfig symbol that does not have a dependency (DRM_I915_GVT)
into a list of other symbols that do have a dependency (on

drm/i915: move a Kconfig symbol to unbreak the menu presentation

Inserting a Kconfig symbol that does not have a dependency (DRM_I915_GVT)
into a list of other symbols that do have a dependency (on DRM_I915)
breaks the driver menu presentation in 'make *config'.

Relocate the DRM_I915_GVT symbol so that it does not cause this
problem.

Fixes: 8b750bf74418 ("drm/i915/gvt: move the gvt code into kvmgt.ko")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Zhi Wang <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Zhenyu Wang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

vfio-mdev: add back CONFIG_VFIO dependency

CONFIG_VFIO_MDEV cannot be selected when VFIO itself is
disabled, otherwise we get a link failure:

WARNING: unmet direct dependencies detected for VFIO_MD

vfio-mdev: add back CONFIG_VFIO dependency

CONFIG_VFIO_MDEV cannot be selected when VFIO itself is
disabled, otherwise we get a link failure:

WARNING: unmet direct dependencies detected for VFIO_MDEV
Depends on [n]: VFIO [=n]
Selected by [y]:
- SAMPLE_VFIO_MDEV_MTTY [=y] && SAMPLES [=y]
- SAMPLE_VFIO_MDEV_MDPY [=y] && SAMPLES [=y]
- SAMPLE_VFIO_MDEV_MBOCHS [=y] && SAMPLES [=y]
/home/arnd/cross/arm64/gcc-13.0.1-nolibc/x86_64-linux/bin/x86_64-linux-ld: samples/vfio-mdev/mdpy.o: in function `mdpy_remove':
mdpy.c:(.text+0x1e1): undefined reference to `vfio_unregister_group_dev'
/home/arnd/cross/arm64/gcc-13.0.1-nolibc/x86_64-linux/bin/x86_64-linux-ld: samples/vfio-mdev/mdpy.o: in function `mdpy_probe':
mdpy.c:(.text+0x149e): undefined reference to `_vfio_alloc_device'

Fixes: 8bf8c5ee1f38 ("vfio-mdev: turn VFIO_MDEV into a selectable symbol")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio-mdev: turn VFIO_MDEV into a selectable symbol

VFIO_MDEV is just a library with helpers for the drivers. Stop making
it a user choice and just select it by the drivers that use the helpers.

Si

vfio-mdev: turn VFIO_MDEV into a selectable symbol

VFIO_MDEV is just a library with helpers for the drivers. Stop making
it a user choice and just select it by the drivers that use the helpers.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Tony Krowiak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

drm: Only select I2C_ALGOBIT for drivers that actually need it

While working on a drm driver that doesn't need the i2c algobit stuff I
noticed that DRM selects this code even though only 8 drivers a

drm: Only select I2C_ALGOBIT for drivers that actually need it

While working on a drm driver that doesn't need the i2c algobit stuff I
noticed that DRM selects this code even though only 8 drivers actually use
it. While also only some drivers use i2c, keep the select for I2C for the
next cleanup patch. Still prepare this already by also selecting I2C for
the individual drivers.

Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...