drm/amd/display: Move all linux includes into OS types

Move all linux includes into OS types.

Acked-by: Alan Liu <[email protected]>
Signed-off-by: Harry Wentland <[email protected]>
Tested-

drm/amd/display: Move all linux includes into OS types

Move all linux includes into OS types.

Acked-by: Alan Liu <[email protected]>
Signed-off-by: Harry Wentland <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Fix issue with dynamic bpp change for DCN3x

Why:
Screen sometimes would have artifacts or blink once at the time when bpp
is dynamically changed.

How:
1. Changed to update PPS info

drm/amd/display: Fix issue with dynamic bpp change for DCN3x

Why:
Screen sometimes would have artifacts or blink once at the time when bpp
is dynamically changed.

How:
1. Changed to update PPS infopacket in frame mode instead of immediate mode
since other updates for bpp change are double-buffered.
2. Changed double-buffering enablement programming for DCN30 as advised by
ASIC team

Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Bing Guo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Add DPCD writes at key points

This reverts commit "Revert "Add DPCD writes at key points" ".
The following patch will fix the system hang issue.

v2: squash in indentation warning f

drm/amd/display: Add DPCD writes at key points

This reverts commit "Revert "Add DPCD writes at key points" ".
The following patch will fix the system hang issue.

v2: squash in indentation warning fix

Signed-off-by: Leo (Hanghong) Ma <[email protected]>
Acked-by: Mikita Lipski <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Add dp_set_dsc_pps_info_packet to virtual stream encoder

Signed-off-by: Eric Bernstein <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by

drm/amd/display: Add dp_set_dsc_pps_info_packet to virtual stream encoder

Signed-off-by: Eric Bernstein <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Rename set_mst_bandwidth to align with DP spec

[Why]
The function set_mst_bandwidth is poorly name since it isn't clear what
it does, and it also does not reflect any part of the al

drm/amd/display: Rename set_mst_bandwidth to align with DP spec

[Why]
The function set_mst_bandwidth is poorly name since it isn't clear what
it does, and it also does not reflect any part of the allocation sequence
described in the DP spec.

[How]
Rename the function set_mst_bandwidth to set_throttled_vcp_size.

Signed-off-by: George Shen <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Update virtual stream encoder

Signed-off-by: Eric Bernstein <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Aurabindo Pillai <aurabin

drm/amd/display: Update virtual stream encoder

Signed-off-by: Eric Bernstein <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTED

[Why]

DCN2 and DSC are stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The foll

drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTED

[Why]

DCN2 and DSC are stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The following commands were executed
in sequence:

$ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'
$ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'

In addition:

* Remove from kconfig, and replace any dependencies with DCN1_0.
* Remove from any makefiles.
* Fix and cleanup NV defninitions in dal_asic_id.h
* Expand DCN1 ifdef to include DCN2 code in the following files:
* clk_mgr/clk_mgr.c: dc_clk_mgr_create()
* core/dc_resources.c: dc_create_resource_pool()
* dce/dce_dmcu.c: dcn20_*lock_phy()
* dce/dce_dmcu.c: dcn20_funcs
* dce/dce_dmcu.c: dcn20_dmcu_create()
* gpio/hw_factory.c: dal_hw_factory_init()
* gpio/hw_translate.c: dal_hw_translate_init()

Signed-off-by: Leo Li <[email protected]>
Signed-off-by: Bhawanpreet Lakha <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: set MSA MISC1 bit 6 while sending colorimetry in VSC SDP

[Why]
It is confusing to sinks if we send VSC SDP only on some format. Today we
signal colorimetry format using MSA while in

drm/amd/display: set MSA MISC1 bit 6 while sending colorimetry in VSC SDP

[Why]
It is confusing to sinks if we send VSC SDP only on some format. Today we
signal colorimetry format using MSA while in formats like sRGB.
But when we switch to BT2020 we set the bit to ignore MSA colorimetry and
instead use the colorimetry information in the VSC SDP.

But if sink supports signaling of colorimetry via VSC SDP we should always
set the MSA MISC1 bit 6, instead of doing so selectively.

[How]
If sink supports signaling of colorimetry via VSC SDP, and we are sending
the colorimetry info via VSC SDP with packet revision 05h, then always
set MSA MISC1 bit 6.

Signed-off-by: Anthony Koo <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Bhawanpreet Lakha <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: reset hdmi tmds rate and data scramble on pipe reset

[why]
hdmi data scramble and tmds rate is not reset during pipe reset.

[how]
reset hdmi tmds rate and data scramble on pipe res

drm/amd/display: reset hdmi tmds rate and data scramble on pipe reset

[why]
hdmi data scramble and tmds rate is not reset during pipe reset.

[how]
reset hdmi tmds rate and data scramble on pipe reset

Signed-off-by: Wenjing Liu <[email protected]>
Reviewed-by: Chris Park <[email protected]>
Acked-by: Leo Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Add DSC support for Navi (v2)

Add support for DCN2 DSC (Display Stream Compression)

HW Blocks:

+--------++------+ +----------+
| HUBBUB || HUBP | <-- | MMHUBBUB |
+----

drm/amd/display: Add DSC support for Navi (v2)

Add support for DCN2 DSC (Display Stream Compression)

HW Blocks:

+--------++------+ +----------+
| HUBBUB || HUBP | <-- | MMHUBBUB |
+--------++------+ +----------+
| ^
v |
+--------+ +--------+
| DPP | | DWB |
+--------+ +--------+
|
v ^
+--------+ |
| MPC | |
+--------+ |
| |
v |
+-------+ +-------+ |
| OPP | <--> | DSC | |
+-------+ +-------+ |
| |
v |
+--------+ /
| OPTC | --------------
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+

v2: rebase (Alex)

Signed-off-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Add DCN2 DIO

Add support for the DIO (Display IO) block of DCN2, which entails our
stream and link encoders.

HW Blocks:

+--------+
| DIO |
+--------+

Signed-off-b

drm/amd/display: Add DCN2 DIO

Add support for the DIO (Display IO) block of DCN2, which entails our
stream and link encoders.

HW Blocks:

+--------+
| DIO |
+--------+

Signed-off-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd: drop use of drmp.h in os_types.h

Drop use of the deprecated drmP.h from display/dc/os_types.h

Fix all fallout after this change.
Most of the fixes was adding a missing include of vmalloc.h

drm/amd: drop use of drmp.h in os_types.h

Drop use of the deprecated drmP.h from display/dc/os_types.h

Fix all fallout after this change.
Most of the fixes was adding a missing include of vmalloc.h.

Signed-off-by: Sam Ravnborg <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: "David (ChunMing) Zhou" <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm/amd/display: Pass SDP spliting in parameters

pass SDP splitting when setting stream attributes for future use

Signed-off-by: Nikola Cornij <[email protected]>
Reviewed-by: Tony Cheng <Tony.

drm/amd/display: Pass SDP spliting in parameters

pass SDP splitting when setting stream attributes for future use

Signed-off-by: Nikola Cornij <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Bhawanpreet Lakha <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: Use kernel alloc/free

Abstractions are frowned upon.

cocci script:
virtual context
virtual patch
virtual org
virtual report

@@
expression ptr;
@@

- dm_alloc(ptr)
+ kzalloc(ptr, G

drm/amd/display: Use kernel alloc/free

Abstractions are frowned upon.

cocci script:
virtual context
virtual patch
virtual org
virtual report

@@
expression ptr;
@@

- dm_alloc(ptr)
+ kzalloc(ptr, GFP_KERNEL)

@@
expression ptr, size;
@@

- dm_realloc(ptr, size)
+ krealloc(ptr, size, GFP_KERNEL)

@@
expression ptr;
@@

- dm_free(ptr)
+ kfree(ptr)

v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script

Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/display: fix aviInfoFrame bar Info and add set_avMute

Signed-off-by: Charlene Liu <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Harry Wentland

drm/amd/display: fix aviInfoFrame bar Info and add set_avMute

Signed-off-by: Charlene Liu <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...

drm/amd/dc: Add dc display driver (v2)

Supported DCE versions: 8.0, 10.0, 11.0, 11.2

v2: rebase against 4.11

Signed-off-by: Harry Wentland <[email protected]>
Acked-by: Alex Deucher <alexande

drm/amd/dc: Add dc display driver (v2)

Supported DCE versions: 8.0, 10.0, 11.0, 11.2

v2: rebase against 4.11

Signed-off-by: Harry Wentland <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

show more ...