PM / devfreq: exynos: Rename Exynos to lowercase

Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.

"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore

PM / devfreq: exynos: Rename Exynos to lowercase

Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.

"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>

show more ...

PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency

To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ
and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And AR

PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency

To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ
and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ
used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent
the build break.

Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

PM / devfreq: exynos-nocp: Select REGMAP_MMIO

This driver uses devm_regmap_init_mmio(), so select REGMAP_MMIO to avoid
build failure.

Signed-off-by: Axel Lin <[email protected]>
Acked-by: Chanwoo

PM / devfreq: exynos-nocp: Select REGMAP_MMIO

This driver uses devm_regmap_init_mmio(), so select REGMAP_MMIO to avoid
build failure.

Signed-off-by: Axel Lin <[email protected]>
Acked-by: Chanwoo Choi <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM / devfreq: event: support rockchip dfi controller

on rk3399 platform, there is dfi conroller can monitor
ddr load, base on this result, we can do ddr freqency
scaling.

Signed-off-by: Lin Huang <

PM / devfreq: event: support rockchip dfi controller

on rk3399 platform, there is dfi conroller can monitor
ddr load, base on this result, we can do ddr freqency
scaling.

Signed-off-by: Lin Huang <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
Acked-by: Chanwoo Choi <[email protected]>

show more ...

PM / devfreq: Add COMPILE_TEST for build coverage

The SoC-specific devfreq and devfreq-event drivers can be build tested
on all architectures.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsun

PM / devfreq: Add COMPILE_TEST for build coverage

The SoC-specific devfreq and devfreq-event drivers can be build tested
on all architectures.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chanwoo Choi <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>

show more ...

PM / devfreq: make event/exynos-ppmu DEVFREQ_EVENT_EXYNOS_PPMU tristate

The Kconfig currently controlling compilation of this code is:

config DEVFREQ_EVENT_EXYNOS_PPMU
bool "EXYNOS PPMU (Platform

PM / devfreq: make event/exynos-ppmu DEVFREQ_EVENT_EXYNOS_PPMU tristate

The Kconfig currently controlling compilation of this code is:

config DEVFREQ_EVENT_EXYNOS_PPMU
bool "EXYNOS PPMU (Platform Performance Monitoring Unit) DEVFREQ event Driver"

...meaning that it currently is not being built as a module by anyone.

Rather than rip out the existing modular code, Chanwoo indicated
that he'd rather see the driver offered as tristate.

I don't have the hardware for runtime validation, so this change
is only validated for compile and modpost.

Signed-off-by: Paul Gortmaker <[email protected]>
Acked-by: Chanwoo Choi <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>

show more ...

PM / devfreq: make event/exynos-nocp DEVFREQ_EVENT_EXYNOS_NOCP tristate

The Kconfig currently controlling compilation of this code is:

event/Kconfig:config DEVFREQ_EVENT_EXYNOS_NOCP
event/Kconfig:

PM / devfreq: make event/exynos-nocp DEVFREQ_EVENT_EXYNOS_NOCP tristate

The Kconfig currently controlling compilation of this code is:

event/Kconfig:config DEVFREQ_EVENT_EXYNOS_NOCP
event/Kconfig: bool "EXYNOS NoC (Network On Chip) Probe DEVFREQ event Driver"

...meaning that it currently is not being built as a module by anyone.

Rather than rip out the existing modular code, Chanwoo indicated
that he'd rather see the driver offered as tristate.

I don't have the hardware for runtime validation, so this change
is only validated for compile and modpost.

Signed-off-by: Paul Gortmaker <[email protected]>
Acked-by: Chanwoo Choi <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>

show more ...

PM / devfreq: event: Add new Exynos NoC probe driver

This patch adds NoC (Network on Chip) Probe driver which provides
the primitive values to get the performance data. The packets that the Network

PM / devfreq: event: Add new Exynos NoC probe driver

This patch adds NoC (Network on Chip) Probe driver which provides
the primitive values to get the performance data. The packets that the Network
on Chip (NoC) probes detects are transported over the network infrastructure.
Exynos542x bus has multiple NoC probes to provide bandwidth information about
behavior of the SoC that you can use while analyzing system performance.

Signed-off-by: Chanwoo Choi <[email protected]>
Tested-by: Markus Reichl <[email protected]>
Tested-by: Anand Moon <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>

show more ...

PM / devfreq: event: Add devfreq_event class

This patch adds a new class in devfreq, devfreq_event, which provides
raw data (e.g., memory bus utilization, GPU utilization) for devfreq
governors.

-

PM / devfreq: event: Add devfreq_event class

This patch adds a new class in devfreq, devfreq_event, which provides
raw data (e.g., memory bus utilization, GPU utilization) for devfreq
governors.

- devfreq_event device : Provides raw data for a governor of a devfreq device
- devfreq device : Monitors device state and changes frequency/voltage
of the device using the raw data from its
devfreq_event device.

A devfreq device dertermines performance states (normally the frequency
and the voltage vlues) based on the results its designtated devfreq governor:
e.g., ondemand, performance, powersave.

In order to give such results required by a devfreq device, the devfreq
governor requires data that indicates the performance requirement given
to the devfreq device. The conventional (previous) implementatino of
devfreq subsystem requires a devfreq device driver to implement its own
mechanism to acquire performance requirement for its governor. However,
there had been issues with such requirements:

1. Although performance requirement of such devices is usually acquired
from common devices (PMU/PPMU), we do not have any abstract structure to
represent them properly.
2. Such performance requirement devices (PMU/PPMU) are actual hardware
pieces that may be represented by Device Tree directly while devfreq device
itself is a virtual entity that are not considered to be represented by
Device Tree according to Device Tree folks.

In order to address such issues, a devferq_event device (represented by
this patch) provides a template for device drivers representing
performance monitoring unit, which gives the basic or raw data for
preformance requirement, which in turn, is required by devfreq governors.

The following description explains the feature of two kind of devfreq class:
- devfreq class (existing)
: devfreq consumer device use raw data from devfreq_event device for
determining proper current system state and change voltage/frequency
dynamically using various governors.

- devfreq_event class (new)
: Provide measured raw data to devfreq device for governor

Cc: MyungJoo Ham <[email protected]>
Cc: Kyungmin Park <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>
[Commit message rewritten & conflict resolved by MyungJoo]
Signed-off-by: MyungJoo Ham <[email protected]>

show more ...