tracing: Disable branch profiling in noinstr code

CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update()
for each use of likely() or unlikely(). That breaks noinstr rules if
the aff

tracing: Disable branch profiling in noinstr code

CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update()
for each use of likely() or unlikely(). That breaks noinstr rules if
the affected function is annotated as noinstr.

Disable branch profiling for files with noinstr functions. In addition
to some individual files, this also includes the entire arch/x86
subtree, as well as the kernel/entry, drivers/cpuidle, and drivers/idle
directories, all of which are noinstr-heavy.

Due to the nature of how sched binaries are built by combining multiple
.c files into one, branch profiling is disabled more broadly across the
sched code than would otherwise be needed.

This fixes many warnings like the following:

vmlinux.o: warning: objtool: do_syscall_64+0x40: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rdgsbase_inactive+0x33: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: handle_bug.isra.0+0x198: call to ftrace_likely_update() leaves .noinstr.text section
...

Reported-by: Ingo Molnar <[email protected]>
Suggested-by: Steven Rostedt <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Link: https://lore.kernel.org/r/fb94fc9303d48a5ed370498f54500cc4c338eb6d.1742586676.git.jpoimboe@kernel.org

show more ...

cpuidle: Add RISC-V SBI CPU idle driver

The RISC-V SBI HSM extension provides HSM suspend call which can
be used by Linux RISC-V to enter platform specific low-power state.

This patch adds a CPU id

cpuidle: Add RISC-V SBI CPU idle driver

The RISC-V SBI HSM extension provides HSM suspend call which can
be used by Linux RISC-V to enter platform specific low-power state.

This patch adds a CPU idle driver based on RISC-V SBI calls which
will populate idle states from device tree and use SBI calls to
entry these idle states.

Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Acked-by: Atish Patra <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

cpuidle: Factor-out power domain related code from PSCI domain driver

The generic power domain related code in PSCI domain driver is largely
independent of PSCI and can be shared with RISC-V SBI dom

cpuidle: Factor-out power domain related code from PSCI domain driver

The generic power domain related code in PSCI domain driver is largely
independent of PSCI and can be shared with RISC-V SBI domain driver
hence we factor-out this code into dt_idle_genpd.c and dt_idle_genpd.h.

Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

cpuidle: psci: Split into two separate build objects

The combined build object for the PSCI cpuidle driver and the PSCI PM
domain, is a bit messy. Therefore let's split it up by adding a new Kconfig

cpuidle: psci: Split into two separate build objects

The combined build object for the PSCI cpuidle driver and the PSCI PM
domain, is a bit messy. Therefore let's split it up by adding a new Kconfig
ARM_PSCI_CPUIDLE_DOMAIN and convert into two separate objects.

Reviewed-by: Lina Iyer <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver

The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.

Converting it actual

cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver

The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.

Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:

- We can parse the CPUidle states in the device tree directly
with dt_idle_states (and don't need to duplicate that
functionality into the spm driver).

- Each "saw" device managed by the SPM driver now directly
registers its own cpuidle driver, removing the need for
any global (per cpu) state.

The device tree binding is the same, so the driver stays
compatible with all old device trees.

Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Lina Iyer <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle

The driver's code is refactored in a way that will make it easy to
support Tegra30/114/124 SoCs by this unified driver later

cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle

The driver's code is refactored in a way that will make it easy to
support Tegra30/114/124 SoCs by this unified driver later on. The
current functionality is equal to the old Tegra20 driver, only the
code's structure changed a tad. This is also a proper platform driver
now.

Acked-by: Peter De Schrijver <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

show more ...

cpuidle: psci: Add a helper to attach a CPU to its PM domain

Introduce a PSCI DT helper function, psci_dt_attach_cpu(), which takes a
CPU number as an in-parameter and tries to attach the CPU's stru

cpuidle: psci: Add a helper to attach a CPU to its PM domain

Introduce a PSCI DT helper function, psci_dt_attach_cpu(), which takes a
CPU number as an in-parameter and tries to attach the CPU's struct device
to its corresponding PM domain.

Let's makes use of dev_pm_domain_attach_by_name(), as it allows us to
specify "psci" as the "name" of the PM domain to attach to. Additionally,
let's also prepare the attached device to be power managed via runtime PM.

Note that, the implementation of the new helper function is in a new
separate c-file, which may seems a bit too much at this point. However,
subsequent changes that implements the remaining part of the PM domain
support for cpuidle-psci, helps to justify this split.

Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>

show more ...

ARM: psci: cpuidle: Introduce PSCI CPUidle driver

PSCI firmware is the standard power management control for
all ARM64 based platforms and it is also deployed on some
ARM 32 bit platforms to date.

ARM: psci: cpuidle: Introduce PSCI CPUidle driver

PSCI firmware is the standard power management control for
all ARM64 based platforms and it is also deployed on some
ARM 32 bit platforms to date.

Idle state entry in PSCI is currently achieved by calling
arm_cpuidle_init() and arm_cpuidle_suspend() in a generic
idle driver, which in turn relies on ARM/ARM64 CPUidle back-end
to relay the call into PSCI firmware if PSCI is the boot method.

Given that PSCI is the standard idle entry method on ARM64 systems
(which means that no other CPUidle driver are expected on ARM64
platforms - so PSCI is already a generic idle driver), in order to
simplify idle entry and code maintenance, it makes sense to have a PSCI
specific idle driver so that idle code that it is currently living in
drivers/firmware directory can be hoisted out of it and moved
where it belongs, into a full-fledged PSCI driver, leaving PSCI code
in drivers/firmware as a pure firmware interface, as it should be.

Implement a PSCI CPUidle driver. By default it is a silent Kconfig entry
which is left unselected, since it selection would clash with the
generic ARM CPUidle driver that provides a PSCI based idle driver
through the arm/arm64 arches back-ends CPU operations.

Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Will Deacon <[email protected]>

show more ...

add cpuidle-haltpoll driver

Add a cpuidle driver that calls the architecture default_idle routine.

To be used in conjunction with the haltpoll governor.

Signed-off-by: Marcelo Tosatti <mtosatti@re

add cpuidle-haltpoll driver

Add a cpuidle driver that calls the architecture default_idle routine.

To be used in conjunction with the haltpoll governor.

Signed-off-by: Marcelo Tosatti <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

cpuidle: Move polling state initialization code to separate file

Move the polling state initialization code to a separate file built
conditionally on CONFIG_ARCH_HAS_CPU_RELAX to get rid of the #ifd

cpuidle: Move polling state initialization code to separate file

Move the polling state initialization code to a separate file built
conditionally on CONFIG_ARCH_HAS_CPU_RELAX to get rid of the #ifdef
in driver.c.

Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>

show more ...

ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64

ARM32 and ARM64 have the same DT definitions and the same approaches.

The generic ARM cpuidle driver can be put in common for those two
ar

ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64

ARM32 and ARM64 have the same DT definitions and the same approaches.

The generic ARM cpuidle driver can be put in common for those two
architectures.

Signed-off-by: Daniel Lezcano <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Acked-by: Rob Herring <[email protected]>
Acked-by: Lorenzo Pieralisi <[email protected]>
Tested-by: Lorenzo Pieralisi <[email protected]>

show more ...

drivers: cpuidle: CPU idle ARM64 driver

This patch implements a generic CPU idle driver for ARM64 machines.

It relies on the DT idle states infrastructure to initialize idle
states count and respec

drivers: cpuidle: CPU idle ARM64 driver

This patch implements a generic CPU idle driver for ARM64 machines.

It relies on the DT idle states infrastructure to initialize idle
states count and respective parameters. Current code assumes the driver
is managing idle states on all possible CPUs but can be easily
generalized to support heterogenous systems and build cpumasks at
runtime using MIDRs or DT cpu nodes compatible properties.

The driver relies on the arm64 CPU operations to call the idle
initialization hook used to parse and save suspend back-end specific
idle states information upon probing.

Idle state index 0 is always initialized as a simple wfi state, ie always
considered present and functional on all ARM64 platforms.

Idle state indices higher than 0 trigger idle state entry by calling
the cpu_suspend function, that triggers the suspend operation through
the CPU operations suspend back-end hook. cpu_suspend passes the idle
state index as a parameter so that the CPU operations suspend back-end
can retrieve the required idle state data by using the idle state
index to execute a look-up on its internal data structures.

Reviewed-by: Ashwin Chaugule <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

drivers: cpuidle: implement DT based idle states infrastructure

On most common ARM systems, the low-power states a CPU can be put into are
not discoverable in HW and require device tree bindings to

drivers: cpuidle: implement DT based idle states infrastructure

On most common ARM systems, the low-power states a CPU can be put into are
not discoverable in HW and require device tree bindings to describe
power down suspend operations and idle states parameters.

In order to enable DT based idle states and configure idle drivers, this
patch implements the bulk infrastructure required to parse the device tree
idle states bindings and initialize the corresponding CPUidle driver states
data.

The parsing API accepts a start index that defines the first idle state
that should be initialized by the parsing code in order to give new and
legacy driver flexibility over which states should be parsed using the
new DT mechanism.

The idle states node(s) is obtained from the phandle list of the first cpu
in the driver cpumask; the kernel checks that the idle state node phandle
is the same for all CPUs in the driver cpumask before declaring the idle state
as valid and start parsing its content.

The idle state enter function pointer is initialized through DT match
structures passed in by the CPUidle driver, so that ARM legacy code can
cope with platform specific idle entry method based on compatible
string matching and the code used to initialize the enter function pointer
can be moved to the DT generic layer.

Acked-by: Catalin Marinas <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7

This driver will be able to manage the cpuidle for more SoCs than just
Armada 370 and XP. It will also support Armada 38x and potenti

cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7

This driver will be able to manage the cpuidle for more SoCs than just
Armada 370 and XP. It will also support Armada 38x and potentially
other SoC of the Marvell Armada EBU family. To take this into account,
this patch renames the driver and its symbols.

It also changes the driver name from cpuidle-armada-370-xp to
cpuidle-armada-xp, because separate platform drivers will be
registered for the other SoC types. This change must be done
simultaneously in the cpuidle driver and in the PMSU code in order to
remain bisectable.

Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Thomas Petazzoni <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Link: https://lkml.kernel.org/r/1406120453-29291-12-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <[email protected]>

show more ...

cpuidle: cpuidle-cps: add MIPS CPS cpuidle driver

This patch adds a cpuidle driver for systems based around the MIPS
Coherent Processing System (CPS) architecture. It supports four idle
states:

-

cpuidle: cpuidle-cps: add MIPS CPS cpuidle driver

This patch adds a cpuidle driver for systems based around the MIPS
Coherent Processing System (CPS) architecture. It supports four idle
states:

- The standard MIPS wait instruction.

- The non-coherent wait, clock gated & power gated states exposed by
the recently added pm-cps layer.

The pm-cps layer is used to enter all the deep idle states. Since cores
in the clock or power gated states cannot service interrupts, the
gic_send_ipi_single function is modified to send a power up command for
the appropriate core to the CPC in cases where the target CPU has marked
itself potentially incoherent.

Signed-off-by: Paul Burton <[email protected]>

show more ...

ARM: EXYNOS: Move the driver to drivers/cpuidle directory

Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Viresh Kumar <[email protected]>
Reviewed-by: Bartlomiej Zolnie

ARM: EXYNOS: Move the driver to drivers/cpuidle directory

Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Viresh Kumar <[email protected]>
Reviewed-by: Bartlomiej Zolnierkiewicz <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>

show more ...

cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC

Add the wfi, cpu idle and cpu deep idle power states support for the
Armada XP SoCs.

All the latencies and the power consumption v

cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC

Add the wfi, cpu idle and cpu deep idle power states support for the
Armada XP SoCs.

All the latencies and the power consumption values used at the
"armada_370_xp_idle_driver" structure are preliminary and will be
modified in the future after running some measurements and analysis.

Based on the work of Nadav Haklai.

Signed-off-by: Nadav Haklai <[email protected]>
Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Gregory CLEMENT <[email protected]>
Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com
Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Jason Cooper <[email protected]>

show more ...

ARM: clps711x: Add cpuidle driver

Add cpuidle support for ARM Cirrus Logic CLPS711X CPUs.
This CPU has an unique internal register and write to this location
will put the system into the Idle State

ARM: clps711x: Add cpuidle driver

Add cpuidle support for ARM Cirrus Logic CLPS711X CPUs.
This CPU has an unique internal register and write to this location
will put the system into the Idle State by halting the clock to the
processor until an interrupt is generated.

Signed-off-by: Alexander Shiyan <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.

Following patch ports the cpuidle framework for powernv
platform and also implements a cpuidle back-end powernv
idle driver cal

powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform.

Following patch ports the cpuidle framework for powernv
platform and also implements a cpuidle back-end powernv
idle driver calling on to power7_nap and snooze idle states.

Signed-off-by: Deepthi Dharwar <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.

Move the file from arch specific pseries/processor_idle.c
to drivers/cpuidle/cpuidle-pseries.c
Make the relevant Makefile and Kconf

powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.

Move the file from arch specific pseries/processor_idle.c
to drivers/cpuidle/cpuidle-pseries.c
Make the relevant Makefile and Kconfig changes.
Also, introduce Kconfig.powerpc in drivers/cpuidle
for all powerpc cpuidle drivers.

Signed-off-by: Deepthi Dharwar <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

ARM: at91: cpuidle: Move driver to drivers/cpuidle

As the cpuidle driver code has no more the dependency with the pm code, the
'standby' callback being passed as a parameter to the device's platform

ARM: at91: cpuidle: Move driver to drivers/cpuidle

As the cpuidle driver code has no more the dependency with the pm code, the
'standby' callback being passed as a parameter to the device's platform data,
we can move the cpuidle driver in the drivers/cpuidle directory.

Signed-off-by: Daniel Lezcano <[email protected]>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>

Conflicts:

drivers/cpuidle/Kconfig.arm
drivers/cpuidle/Makefile

show more ...

drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries

Following the reorganization of CPU idle drivers configurations into an ARM
specific Kconfig, the existing idle drivers Kco

drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries

Following the reorganization of CPU idle drivers configurations into an ARM
specific Kconfig, the existing idle drivers Kconfig entries were renamed and
moved to the Kconfig.arm file. Makefile entries were updated accordingly.

This patch renames the entries in Kconfig.arm and makefile to make the newly
added big.LITTLE CPUidle driver compliant with the new naming convention.

Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

The big.LITTLE architecture is composed of two clusters of cpus. One cluster
contains less powerful but more energy efficient processors and the oth

cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

The big.LITTLE architecture is composed of two clusters of cpus. One cluster
contains less powerful but more energy efficient processors and the other
cluster groups the powerful but energy-intensive cpus.

The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
a big.LITTLE configuration) connected through a CCI interconnect that manages
coherency of their respective L2 caches and intercluster distributed
virtual memory messages (DVM).

TC2 testchip integrates a power controller that manages cores resets, wake-up
IRQs and cluster low-power states. Power states are managed at cluster
level, which means that voltage is removed from a cluster iff all cores
in a cluster are in a wfi state. Single cores can enter a reset state
which is identical to wfi in terms of power consumption but simplifies the
way cluster states are entered.

This patch provides a multiple driver CPU idle implementation for TC2
which paves the way for a generic big.LITTLE idle driver for all
upcoming big.LITTLE based systems on chip.

The driver relies on the MCPM infrastructure to coordinate and manage
core power states; in particular MCPM allows to suspend specific cores
and hides the CPUs coordination required to shut-down clusters of CPUs.

Power down sequences for the respective clusters are implemented in the
MCPM TC2 backend, with all code needed to clean caches and exit coherency.

The multiple driver CPU idle infrastructure allows to define different
C-states for big and little cores, determined at boot by checking the
part id of the possible CPUs and initializing the respective logical
masks in the big and little drivers.

Current big.little systems are composed of A7 and A15 clusters, as
implemented in TC2, but in the future that may change and the driver
will have evolve to retrieve what is a 'big' cpu and what is a 'little'
cpu in order to build the correct topology.

Cc: Kevin Hilman <[email protected]>
Cc: Amit Kucheria <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: Nicolas Pitre <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>

show more ...

ARM: ux500: cpuidle: Move ux500 cpuidle driver to drivers/cpuidle

There is no more dependency with arch/arm headers, so we can safely move the
driver to the drivers/cpuidle directory.

Signed-off-by

ARM: ux500: cpuidle: Move ux500 cpuidle driver to drivers/cpuidle

There is no more dependency with arch/arm headers, so we can safely move the
driver to the drivers/cpuidle directory.

Signed-off-by: Daniel Lezcano <[email protected]>
Acked-by: Linus Walleij <[email protected]>

show more ...