clocksource: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of

clocksource: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>

show more ...

clocksource: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of

clocksource: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

clocksource: Replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory al

clocksource: Replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

A build error that was reported by kbuild test robot <[email protected]>
in the previous version of the patch also has been fixed.

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

clocksource/drivers/integrator-ap: Add missing of_node_put()

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

clocksource/drivers/integrator-ap: Add missing of_node_put()

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

integrator_ap_timer_init_of() doesn't do that. The pri_node and the
sec_node are used as an identifier to compare against the current
node, so we can directly drop the refcount after getting the node from
the path as it is not used as pointer.

By dropping the refcount right after getting it, a single variable is
needed instead of two.

Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().

Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

clocksource: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: D

clocksource: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Daniel Lezcano <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

clocksource/integrator: Fix section mismatch warning

gcc-4.6 and older fail to inline integrator_clocksource_init, so they
end up showing a harmless warning:

WARNING: vmlinux.o(.text+0x4aa94c): Sec

clocksource/integrator: Fix section mismatch warning

gcc-4.6 and older fail to inline integrator_clocksource_init, so they
end up showing a harmless warning:

WARNING: vmlinux.o(.text+0x4aa94c): Section mismatch in reference from the function integrator_clocksource_init() to the function .init.text:clocksource_mmio_init()
The function integrator_clocksource_init() references
the function __init clocksource_mmio_init().
This is often because integrator_clocksource_init lacks a __init
annotation or the annotation of clocksource_mmio_init is wrong.

Add the missing __init annotation that makes it build cleanly with all
compilers.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]

show more ...

clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE

The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro i

clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE

The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.

It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.

On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.

So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.

The patch has not functional changes.

Signed-off-by: Daniel Lezcano <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Matthias Brugger <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>

show more ...

clocksource: Add missing line break to error messages

Printing with pr_* functions requires adding line break manually.

Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Thierry Reding <tre

clocksource: Add missing line break to error messages

Printing with pr_* functions requires adding line break manually.

Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

clocksources: Switch back to the clksrc table

All the clocksource drivers's init function are now converted to return
an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the
clksrc-of

clocksources: Switch back to the clksrc table

All the clocksource drivers's init function are now converted to return
an error code. CLOCKSOURCE_OF_DECLARE is no longer used as well as the
clksrc-of table.

Let's convert back the names:
- CLOCKSOURCE_OF_DECLARE_RET => CLOCKSOURCE_OF_DECLARE
- clksrc-of-ret => clksrc-of

Signed-off-by: Daniel Lezcano <[email protected]>

For exynos_mct and samsung_pwm_timer:
Acked-by: Krzysztof Kozlowski <[email protected]>

For arch/arc:
Acked-by: Vineet Gupta <[email protected]>

For mediatek driver:
Acked-by: Matthias Brugger <[email protected]>

For the Rockchip-part
Acked-by: Heiko Stuebner <[email protected]>

For STi :
Acked-by: Patrice Chotard <[email protected]>

For the mps2-timer.c and versatile.c changes:
Acked-by: Liviu Dudau <[email protected]>

For the OXNAS part :
Acked-by: Neil Armstrong <[email protected]>

For LPC32xx driver:
Acked-by: Sylvain Lemieux <[email protected]>

For Broadcom Kona timer change:
Acked-by: Ray Jui <[email protected]>

For Sun4i and Sun5i:
Acked-by: Chen-Yu Tsai <[email protected]>

For Meson6:
Acked-by: Carlo Caione <[email protected]>

For Keystone:
Acked-by: Santosh Shilimkar <[email protected]>

For NPS:
Acked-by: Noam Camus <[email protected]>

For bcm2835:
Acked-by: Eric Anholt <[email protected]>

show more ...

clocksource/drivers/integrator-ap: Convert init function to return error

The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while an

clocksource/drivers/integrator-ap: Convert init function to return error

The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly

or

- print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <[email protected]>

show more ...

clockevents/drivers/integrator: Migrate to new 'set-state' interface

Migrate integrator driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is mark

clockevents/drivers/integrator: Migrate to new 'set-state' interface

Migrate integrator driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

For oneshot mode the clkevt device was first getting disabled by
clearing TIMER_CTRL_ENABLE bits in TIMER_CTRL register, followed by
clearing TIMER_CTRL_PERIODIC bit. Both these are done with a single
write operation now.

Cc: Linus Walleij <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Acked-by: Linus Walleij <[email protected]>

show more ...

ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource

The ARM Dual-Timer SP804 module is peripheral found not only on ARM32
platforms but also on ARM64 platforms.

This patch moves the dr

ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource

The ARM Dual-Timer SP804 module is peripheral found not only on ARM32
platforms but also on ARM64 platforms.

This patch moves the driver out of arch/arm to driver/clocksource
so that it can be used on ARM64 platforms also.

Cc: Daniel Lezcano <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Olof Johansson <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

clocksource: integrator: Fix of_io_request_and_map error check

of_io_request_and map returns an error pointer, but the current code assumes
that on error the returned pointer will be NULL.

Obviousl

clocksource: integrator: Fix of_io_request_and_map error check

of_io_request_and map returns an error pointer, but the current code assumes
that on error the returned pointer will be NULL.

Obviously, that makes the check completely useless. Change the test to actually
check for the proper error code.

Signed-off-by: Maxime Ripard <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Link: http://lkml.kernel.org/r/1430579006-32702-5-git-send-email-maxime.ripard@free-electrons.com
Signed-off-by: Thomas Gleixner <[email protected]>

show more ...

ARM: integrator: move AP timer to clocksource

This moves the timer/clocksource implementation for the
Integrator/AP down to drivers/clocksource and augments the
driver a little to use CLOCKSOURCE_OF

ARM: integrator: move AP timer to clocksource

This moves the timer/clocksource implementation for the
Integrator/AP down to drivers/clocksource and augments the
driver a little to use CLOCKSOURCE_OF_DECLARE(). Remove
the static mapping of the timer blocks while we're at it.

Tested on the Integrator/AP.

Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>

show more ...