Bluetooth: btsdio: Do not bind to non-removable CYW4373

CYW4373 devices soldered onto the PCB (non-removable),
use a UART connection for Bluetooth and the advertised btsdio
support as an SDIO functi

Bluetooth: btsdio: Do not bind to non-removable CYW4373

CYW4373 devices soldered onto the PCB (non-removable),
use a UART connection for Bluetooth and the advertised btsdio
support as an SDIO function should be ignored.

Signed-off-by: Scott Ehlert <[email protected]>
Signed-off-by: Tim Harvey <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>

show more ...

Bluetooth: HCI: Remove HCI_AMP support

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer n

Bluetooth: HCI: Remove HCI_AMP support

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>

show more ...

Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"

This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.

This patch introduces a possible null-ptr-de

Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"

This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.

This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition").

Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work")
Signed-off-by: Liu Jian <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>

show more ...

Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition

In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.

If the btsdio_re

Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition

In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.

If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove.

Signed-off-by: Zheng Wang <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>

show more ...

Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work

In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.

If w

Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work

In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.

If we call btsdio_remove with an unfinished job, there may
be a race condition and cause UAF bug on hdev.

Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Signed-off-by: Zheng Wang <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>

show more ...

Bluetooth: btsdio: Do not bind to non-removable BCM4345 and BCM43455

BCM4345 and BCM43455 devices soldered onto the PCB (non-removable),
use an UART connection for Bluetooth, such as in the Pinebook

Bluetooth: btsdio: Do not bind to non-removable BCM4345 and BCM43455

BCM4345 and BCM43455 devices soldered onto the PCB (non-removable),
use an UART connection for Bluetooth, such as in the Pinebook Pro,
and the advertised btsdio support as an SDIO function is ignored.

Reviewed-by: Dragan Simic <[email protected]>
Signed-off-by: Kyle Copperfield <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

Bluetooth: btsdio: Check for valid packet type

Check for valid packet type before calling hci_recv_frame which is
inline with what other drivers are doing.

Signed-off-by: Luiz Augusto von Dentz <lu

Bluetooth: btsdio: Check for valid packet type

Check for valid packet type before calling hci_recv_frame which is
inline with what other drivers are doing.

Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

Bluetooth: btsdio: Do not bind to non-removable BCM4356

BCM4356 devices soldered onto the PCB (non-removable) use an UART
connection for bluetooth, such as the Rock960, but it also advertise
btsdio

Bluetooth: btsdio: Do not bind to non-removable BCM4356

BCM4356 devices soldered onto the PCB (non-removable) use an UART
connection for bluetooth, such as the Rock960, but it also advertise
btsdio support as a sdio function.

Signed-off-by: Peter Robinson <[email protected]>
CC: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

Bluetooth: btsdio: Use module_sdio_driver helper

Macro module_sdio_driver is used for drivers whose init and exit paths
only register and unregister to SDIO API. So remove boilerplate code to
make c

Bluetooth: btsdio: Use module_sdio_driver helper

Macro module_sdio_driver is used for drivers whose init and exit paths
only register and unregister to SDIO API. So remove boilerplate code to
make code simpler by using module_sdio_driver.

Signed-off-by: Sean Wang <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

Bluetooth: btsdio: Do not bind to non-removable BCM43430

BCM43430 devices soldered onto the PCB (non-removable)
use an UART connection for bluetooth.
But also advertise btsdio support on their 3th s

Bluetooth: btsdio: Do not bind to non-removable BCM43430

BCM43430 devices soldered onto the PCB (non-removable)
use an UART connection for bluetooth.
But also advertise btsdio support on their 3th sdio function.

Signed-off-by: Cho, Yu-Chen <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

Bluetooth: btsdio: Do not bind to non-removable BCM43341

BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT)
use an UART connection for bluetooth. But they also advertise btsdio
s

Bluetooth: btsdio: Do not bind to non-removable BCM43341

BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT)
use an UART connection for bluetooth. But they also advertise btsdio
support on their 3th sdio function, this causes 2 problems:

1) A non functioning BT HCI getting registered

2) Since the btsdio driver does not have suspend/resume callbacks,
mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify()
to react as if the SDIO-card is removed and since the slot is
marked as non-removable it will never get detected as inserted again.
Which results in wifi no longer working after a suspend/resume.

This commit fixes both by making btsdio ignore BCM43341 devices
when connected to a slot which is marked non-removable.

Cc: [email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

Bluetooth: Style fix - align block comments

Fixed alignment of all block comments.
Found using checkpatch

Signed-off-by: Derek Robson <[email protected]>
Signed-off-by: Marcel Holtmann <marcel@hol

Bluetooth: Style fix - align block comments

Fixed alignment of all block comments.
Found using checkpatch

Signed-off-by: Derek Robson <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

Bluetooth: Rename HCI_BREDR into HCI_PRIMARY

The HCI_BREDR naming is confusing since it actually stands for Primary
Bluetooth Controller. Which is a term that has been used in the latest
standard. H

Bluetooth: Rename HCI_BREDR into HCI_PRIMARY

The HCI_BREDR naming is confusing since it actually stands for Primary
Bluetooth Controller. Which is a term that has been used in the latest
standard. However from a legacy point of view there only really have
been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of
Bluetooth introduced Low Energy (LE) and made this terminology a little
bit confused since Dual Mode Controllers include BR/EDR and LE. To
simplify this the name HCI_PRIMARY stands for the Primary Controller
which can be a single mode or dual mode controller.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Use new hci_skb_pkt_* wrappers for drivers

The new hci_skb_pkt_* wrappers are mainly intented for drivers to
require less knowledge about bt_cb(sbk) handling. So after converting
the core

Bluetooth: Use new hci_skb_pkt_* wrappers for drivers

The new hci_skb_pkt_* wrappers are mainly intented for drivers to
require less knowledge about bt_cb(sbk) handling. So after converting
the core packet handling, convert all drivers.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Move handling of HCI_RUNNING flag into core

Setting and clearing of HCI_RUNNING flag in each and every driver is
just duplicating the same code all over the place. So instead of having
th

Bluetooth: Move handling of HCI_RUNNING flag into core

Setting and clearing of HCI_RUNNING flag in each and every driver is
just duplicating the same code all over the place. So instead of having
the driver do it in their hdev->open and hdev->close callbacks, set it
globally in the core transport handling.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Move HCI_RUNNING check into hci_send_frame

In all callbacks for hdev->send the status of HCI_RUNNING is checked. So
instead of repeating that code in every driver, move the check into the

Bluetooth: Move HCI_RUNNING check into hci_send_frame

In all callbacks for hdev->send the status of HCI_RUNNING is checked. So
instead of repeating that code in every driver, move the check into the
hci_send_frame function before calling hdev->send.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Use MD SET register for changing SDIO Type-B to Type-A

The register for setting the SDIO card mode of a Type-B Bluetooth card
is called MD SET. The MD STAT register is used for reading th

Bluetooth: Use MD SET register for changing SDIO Type-B to Type-A

The register for setting the SDIO card mode of a Type-B Bluetooth card
is called MD SET. The MD STAT register is used for reading the current
mode back.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Set HCI_QUIRK_RESET_ON_CLOSE for Socket SDIO cards

The Socket Bluetooth SDIO cards are branded versions of Toshiba SD-BT2
and they do not support sending HCI_Reset as first command. To ma

Bluetooth: Set HCI_QUIRK_RESET_ON_CLOSE for Socket SDIO cards

The Socket Bluetooth SDIO cards are branded versions of Toshiba SD-BT2
and they do not support sending HCI_Reset as first command. To make
this card work the HCI_QUIRK_RESET_ON_CLOSE quirk needs to be set
before registering the controller.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Add hdev parameter to hdev->send driver callback

Instead of masking hdev inside the skb->dev parameter, hand it
directly to the driver as a parameter to hdev->send. This makes
the driver

Bluetooth: Add hdev parameter to hdev->send driver callback

Instead of masking hdev inside the skb->dev parameter, hand it
directly to the driver as a parameter to hdev->send. This makes
the driver interface more clear and simpler.

This patch fixes all drivers to accept and handle the new parameter
of hdev->send callback. Special care has been taken for bpa10x
and btusb drivers that require having skb->dev set to hdev for
the URB transmit complete handlers.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback

To avoid casting skb->dev into hdev, just let the drivers provide
the hdev directly when calling hci_recv_frame() function.

Thi

Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback

To avoid casting skb->dev into hdev, just let the drivers provide
the hdev directly when calling hci_recv_frame() function.

This patch also fixes up all drivers to provide the hdev.

Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Use devm_kzalloc in btsdio.c file

devm_kzalloc() eliminates the need to free memory explicitly
thereby saving some cleanup code.

Signed-off-by: Sachin Kamat <[email protected]>
Ack

Bluetooth: Use devm_kzalloc in btsdio.c file

devm_kzalloc() eliminates the need to free memory explicitly
thereby saving some cleanup code.

Signed-off-by: Sachin Kamat <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>

show more ...

Bluetooth: Remove hci_dev->driver_data

The linux device model provides dev_set/get_drvdata so we can use this
to save private driver data.
This also removes several unnecessary casts.

Signed-off-by

Bluetooth: Remove hci_dev->driver_data

The linux device model provides dev_set/get_drvdata so we can use this
to save private driver data.
This also removes several unnecessary casts.

Signed-off-by: David Herrmann <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: Remove HCI-owner field

After unregistering an hci_dev object a bluetooth driver does not have
any callbacks in the hci_dev structure left over. Therefore, there is no
need to keep a refer

Bluetooth: Remove HCI-owner field

After unregistering an hci_dev object a bluetooth driver does not have
any callbacks in the hci_dev structure left over. Therefore, there is no
need to keep a reference to the module.

Previously, we needed this to protect the hci-destruct callback.
However, this callback is no longer available so we do not need this
owner field, anymore. Drivers now call hci_unregister_dev() and they
are done with the object.

Signed-off-by: David Herrmann <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...

Bluetooth: btsdio: Free driver data on SDIO shutdown

Instead of waiting for the hdev object to get freed we now free the
private driver-internal data on SDIO shutdown. This allows us to remove
the o

Bluetooth: btsdio: Free driver data on SDIO shutdown

Instead of waiting for the hdev object to get freed we now free the
private driver-internal data on SDIO shutdown. This allows us to remove
the obsolete hci-destruct callback and free our data object right away
after calling hci_unregister_dev(). The HCI-core does not call any
callbacks after this so we are never called again and can safely exit
the module.

Signed-off-by: David Herrmann <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>

show more ...