crypto: make all generic algorithms set cra_driver_name

Most generic crypto algorithms declare a driver name ending in
"-generic". The rest don't declare a driver name and instead rely on
the crypt

crypto: make all generic algorithms set cra_driver_name

Most generic crypto algorithms declare a driver name ending in
"-generic". The rest don't declare a driver name and instead rely on
the crypto API automagically appending "-generic" upon registration.

Having multiple conventions is unnecessarily confusing and makes it
harder to grep for all generic algorithms in the kernel source tree.
But also, allowing NULL driver names is problematic because sometimes
people fail to set it, e.g. the case fixed by commit 417980364300
("crypto: cavium/zip - fix collision with generic cra_driver_name").

Of course, people can also incorrectly name their drivers "-generic".
But that's much easier to notice / grep for.

Therefore, let's make cra_driver_name mandatory. In preparation for
this, this patch makes all generic algorithms set cra_driver_name.

Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: run initcalls for generic implementations earlier

Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init. Then change
cryptomgr

crypto: run initcalls for generic implementations earlier

Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init. Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed. So, unaligned accesses will crash the kernel. This is
arguably a good thing as it makes it easier to detect that type of bug.

Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: shash - remove useless setting of type flags

Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH. But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_r

crypto: shash - remove useless setting of type flags

Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH. But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the shash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()

Deduplicate le32_to_cpu_array() and cpu_to_le32_array() by moving them
to the generic header.

No functional change implied.

Signed-o

crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()

Deduplicate le32_to_cpu_array() and cpu_to_le32_array() by moving them
to the generic header.

No functional change implied.

Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: prefix module autoloading with "crypto-"

This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as dem

crypto: prefix module autoloading with "crypto-"

This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: add module.h to those files that are explicitly using it

Part of the include cleanups means that the implicit
inclusion of module.h via device.h is going away. So
fix things up in advance.

crypto: add module.h to those files that are explicitly using it

Part of the include cleanups means that the implicit
inclusion of module.h via device.h is going away. So
fix things up in advance.

Signed-off-by: Paul Gortmaker <[email protected]>

show more ...

crypto: md4 - Switch to shash

This patch changes md4 to the new shash interface.

Signed-off-by: Adrian-Ken Rueegsegger <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

crypto: md4 - Use ARRAY_SIZE

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this chan

crypto: md4 - Use ARRAY_SIZE

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

[CRYPTO] all: Clean up init()/fini()

On Thu, Mar 27, 2008 at 03:40:36PM +0100, Bodo Eggert wrote:
> Kamalesh Babulal <[email protected]> wrote:
>
> > This patch cleanups the crypto code,

[CRYPTO] all: Clean up init()/fini()

On Thu, Mar 27, 2008 at 03:40:36PM +0100, Bodo Eggert wrote:
> Kamalesh Babulal <[email protected]> wrote:
>
> > This patch cleanups the crypto code, replaces the init() and fini()
> > with the <algorithm name>_init/_fini
>
> This part ist OK.
>
> > or init/fini_<algorithm name> (if the
> > <algorithm name>_init/_fini exist)
>
> Having init_foo and foo_init won't be a good thing, will it? I'd start
> confusing them.
>
> What about foo_modinit instead?

Thanks for the suggestion, the init() is replaced with

<algorithm name>_mod_init ()

and fini () is replaced with <algorithm name>_mod_fini.

Signed-off-by: Kamalesh Babulal <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

[CRYPTO] all: Pass tfm instead of ctx to algorithms

Up until now algorithms have been happy to get a context pointer since
they know everything that's in the tfm already (e.g., alignment, block
size

[CRYPTO] all: Pass tfm instead of ctx to algorithms

Up until now algorithms have been happy to get a context pointer since
they know everything that's in the tfm already (e.g., alignment, block
size).

However, once we have parameterised algorithms, such information will
be specific to each tfm. So the algorithm API needs to be changed to
pass the tfm structure instead of the context pointer.

This patch is basically a text substitution. The only tricky bit is
the assembly routines that need to get the context pointer offset
through asm-offsets.h.

Signed-off-by: Herbert Xu <[email protected]>

show more ...

[CRYPTO] Use standard byte order macros wherever possible

A lot of crypto code needs to read/write a 32-bit/64-bit words in a
specific gender. Many of them open code them by reading/writing one
byt

[CRYPTO] Use standard byte order macros wherever possible

A lot of crypto code needs to read/write a 32-bit/64-bit words in a
specific gender. Many of them open code them by reading/writing one
byte at a time. This patch converts all the applicable usages over
to use the standard byte order macros.

This is based on a previous patch by Denis Vlasenko.

Signed-off-by: Herbert Xu <[email protected]>

show more ...

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...