treewide: use get_random_bytes() when possible

The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact sa

treewide: use get_random_bytes() when possible

The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.

Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Yury Norov <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]> # powerpc
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>

show more ...

crypto: add __init/__exit annotations to init/exit funcs

Add missing __init/__exit annotations to init/exit funcs.

Signed-off-by: Xiu Jianfeng <[email protected]>
Signed-off-by: Herbert Xu <he

crypto: add __init/__exit annotations to init/exit funcs

Add missing __init/__exit annotations to init/exit funcs.

Signed-off-by: Xiu Jianfeng <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: cleanup comments

For spdx
/* */ for *.h, // for *.c
Space before spdx tag

Replacements
paramenters to parameters
aymmetric to asymmetric
sigature to signature
boudary to boundary
compliled

crypto: cleanup comments

For spdx
/* */ for *.h, // for *.c
Space before spdx tag

Replacements
paramenters to parameters
aymmetric to asymmetric
sigature to signature
boudary to boundary
compliled to compiled
eninges to engines
explicity to explicitly

Signed-off-by: Tom Rix <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

md/raid6: let async recovery function support different page offset

For now, asynchronous raid6 recovery calculate functions are require
common offset for pages. But, we expect them to support diffe

md/raid6: let async recovery function support different page offset

For now, asynchronous raid6 recovery calculate functions are require
common offset for pages. But, we expect them to support different page
offset after introducing stripe shared page. Do that by simplily adding
page offset where each page address are referred. Then, replace the
old interface with the new ones in raid6 and raid6test.

Signed-off-by: Yufen Yu <[email protected]>
Signed-off-by: Song Liu <[email protected]>

show more ...

md/raid6: let syndrome computor support different page offset

For now, syndrome compute functions require common offset in the pages
array. However, we expect them to support different offset when t

md/raid6: let syndrome computor support different page offset

For now, syndrome compute functions require common offset in the pages
array. However, we expect them to support different offset when try to
use shared page in the following. Simplily covert them by adding page
offset where each page address are referred.

Since the only caller of async_gen_syndrome() and async_syndrome_val()
are in raid6, we don't want to reserve the old interface but modify the
interface directly. After that, replacing old interfaces with new ones
for raid6 and raid6test.

Signed-off-by: Yufen Yu <[email protected]>
Signed-off-by: Song Liu <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 111 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

async_pq: Remove VLA usage

In the quest to remove VLAs from the kernel[1], this adjusts the
allocation of coefs and blocks to use the existing maximum values
(with one new define, MAX_DISKS for coef

async_pq: Remove VLA usage

In the quest to remove VLAs from the kernel[1], this adjusts the
allocation of coefs and blocks to use the existing maximum values
(with one new define, MAX_DISKS for coefs, and a reuse of the
existing NDISKS for blocks).

[1] https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Kyle Spiers <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>

show more ...

raid6test: add new corner case for ioatdma driver

With 24 disks and an ioatdma instance with 16 source support there is a
corner case where the driver needs to be careful to account for the
number o

raid6test: add new corner case for ioatdma driver

With 24 disks and an ioatdma instance with 16 source support there is a
corner case where the driver needs to be careful to account for the
number of implied sources in the continuation case.

Also bump the default case to test more than 16 sources now that it
triggers different paths in offload drivers.

Cc: Dave Jiang <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Signed-off-by: Dan Williams <[email protected]>

show more ...

raid6test: use prandom_bytes()

Use prandom_bytes() to generate random bytes for test data.

Signed-off-by: Akinobu Mita <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Vinod Koul <vinod.

raid6test: use prandom_bytes()

Use prandom_bytes() to generate random bytes for test data.

Signed-off-by: Akinobu Mita <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Vinod Koul <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

crypto: add module.h to those files that are explicitly using it

Part of the include cleanups means that the implicit
inclusion of module.h via device.h is going away. So
fix things up in advance.

crypto: add module.h to those files that are explicitly using it

Part of the include cleanups means that the implicit
inclusion of module.h via device.h is going away. So
fix things up in advance.

Signed-off-by: Paul Gortmaker <[email protected]>

show more ...

net: remove mm.h inclusion from netdevice.h

Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually).

To prevent mm.h inclusion via other channels also extract "enum dma_

net: remove mm.h inclusion from netdevice.h

Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually).

To prevent mm.h inclusion via other channels also extract "enum dma_data_direction"
definition into separate header. This tiny piece is what gluing netdevice.h with mm.h
via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h".
Removal of mm.h from scatterlist.h was tried and was found not feasible
on most archs, so the link was cutoff earlier.

Hope people are OK with tiny include file.

Note, that mm_types.h is still dragged in, but it is a separate story.

Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <[email protected]>
Guess-its-ok-by: Christoph Lameter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lee Schermerhorn <[email protected]>

show more ...

async_tx: expand async raid6 test to cover ioatdma corner case

Add explicit 11 and 12 disks cases to exercise the 0 < src_cnt % 8 < 3
corner case in the ioatdma driver.

Signed-off-by: Dan Williams

async_tx: expand async raid6 test to cover ioatdma corner case

Add explicit 11 and 12 disks cases to exercise the 0 < src_cnt % 8 < 3
corner case in the ioatdma driver.

Signed-off-by: Dan Williams <[email protected]>

show more ...

raid6test: fix stack overflow

Testing on x86_64 with NDISKS=255 yields:

do_IRQ: modprobe near stack overflow (cur:ffff88007d19c000,sp:ffff88007d19c128)

...and eventually

general protection

raid6test: fix stack overflow

Testing on x86_64 with NDISKS=255 yields:

do_IRQ: modprobe near stack overflow (cur:ffff88007d19c000,sp:ffff88007d19c128)

...and eventually

general protection fault: 0000 [#1]

Moving the scribble buffers off the stack allows the test to complete
successfully.

Signed-off-by: Dan Williams <[email protected]>

show more ...

async_tx: raid6 recovery self test

Port drivers/md/raid6test/test.c to use the async raid6 recovery
routines. This is meant as a unit test for raid6 acceleration drivers. In
addition to the 16-dri

async_tx: raid6 recovery self test

Port drivers/md/raid6test/test.c to use the async raid6 recovery
routines. This is meant as a unit test for raid6 acceleration drivers. In
addition to the 16-drive test case this implements tests for the 4-disk and
5-disk special cases (dma devices can not generically handle less than 2
sources), and adds a test for the D+Q case.

Reviewed-by: Andre Noll <[email protected]>
Acked-by: Maciej Sosnowski <[email protected]>
Signed-off-by: Dan Williams <[email protected]>

show more ...