treewide: Add SPDX license identifier - Kbuild

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license,

treewide: Add SPDX license identifier - Kbuild

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0

Reported-by: Masahiro Yamada <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

kbuild: force all architectures except um to include mandatory-y

Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include dir

kbuild: force all architectures except um to include mandatory-y

Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.

um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

kbuild: warn redundant generic-y

The generic-y is redundant under the following condition:

- arch has its own implementation

- the same header is added to generated-y

- the same header is adde

kbuild: warn redundant generic-y

The generic-y is redundant under the following condition:

- arch has its own implementation

- the same header is added to generated-y

- the same header is added to mandatory-y

If a redundant generic-y is found, the warning like follows is displayed:

scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h

I fixed up arch Kbuild files found by this.

Suggested-by: Sam Ravnborg <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

arch: Use asm-generic/socket.h when possible

Many architectures maintain an arch specific copy of the
file even though there are no differences with the asm-generic
one. Allow these architectures to

arch: Use asm-generic/socket.h when possible

Many architectures maintain an arch specific copy of the
file even though there are no differences with the asm-generic
one. Allow these architectures to use the generic one instead.

Signed-off-by: Deepa Dinamani <[email protected]>
Acked-by: Max Filippov <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>

show more ...

arch: remove redundant UAPI generic-y defines

Now that Kbuild automatically creates asm-generic wrappers for missing
mandatory headers, it is redundant to list the same headers in
generic-y and mand

arch: remove redundant UAPI generic-y defines

Now that Kbuild automatically creates asm-generic wrappers for missing
mandatory headers, it is redundant to list the same headers in
generic-y and mandatory-y.

Suggested-by: Sam Ravnborg <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>

show more ...

arch: remove stale comments "UAPI Header export list"

These comments are leftovers of commit fcc8487d477a ("uapi: export all
headers under uapi directories").

Prior to that commit, exported headers

arch: remove stale comments "UAPI Header export list"

These comments are leftovers of commit fcc8487d477a ("uapi: export all
headers under uapi directories").

Prior to that commit, exported headers must be explicitly added to
header-y. Now, all headers under the uapi/ directories are exported.

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type

Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which

bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type

Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure. This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs. Programs
using them, for example, the bpf selftest fail to compile on these
architectures.

For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it. For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.

To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type. An asm-generic header file covers the architectures that
export pt_regs today.

The arch-specific enablement for s390 and arm64 follows in separate
commits.

Reported-by: Thomas Richter <[email protected]>
Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <[email protected]>
Reviewed-and-tested-by: Thomas Richter <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

show more ...

switch wrapper poll.h instances to generic-y

Signed-off-by: Al Viro <[email protected]>

kbuild: replace genhdr-y with generated-y

Originally, generated-y and genhdr-y had different meaning, like
follows:

- generated-y: generated headers (other than asm-generic wrappers)
- header-y :

kbuild: replace genhdr-y with generated-y

Originally, generated-y and genhdr-y had different meaning, like
follows:

- generated-y: generated headers (other than asm-generic wrappers)
- header-y : headers to be exported
- genhdr-y : generated headers to be exported (generated-y + header-y)

Since commit fcc8487d477a ("uapi: export all headers under uapi
directories"), headers under UAPI directories are all exported.
So, there is no more difference between generated-y and genhdr-y.

We see two users of genhdr-y, arch/{arm,x86}/include/uapi/asm/Kbuild.
They generate some headers in arch/{arm,x86}/include/generated/uapi/asm
directories, which are obviously exported.

Replace them with generated-y, and abolish genhdr-y.

Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Nicolas Dichtel <[email protected]>

show more ...

uapi: export all headers under uapi directories

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
dete

uapi: export all headers under uapi directories

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <[email protected]> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
- include/uapi/asm-generic/Kbuild.asm;
- arch/<arch>/include/uapi/asm/Kbuild;
- arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Acked-by: Russell King <[email protected]>
Acked-by: Mark Salter <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

x86: stop exporting msr-index.h to userland

Even if this file was not in an uapi directory, it was exported because
it was listed in the Kbuild file.

Fixes: b72e7464e4cf ("x86/uapi: Do not export <

x86: stop exporting msr-index.h to userland

Even if this file was not in an uapi directory, it was exported because
it was listed in the Kbuild file.

Fixes: b72e7464e4cf ("x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers")
Suggested-by: Borislav Petkov <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

perf kvm: Use defines of kvm events

Currently perf-kvm uses string literals for kvm event names, but it
works only for x86, because other architectures may have other names for
those events.

To red

perf kvm: Use defines of kvm events

Currently perf-kvm uses string literals for kvm event names, but it
works only for x86, because other architectures may have other names for
those events.

To reduce dependence on architecture, we add <asm/kvm_perf.h> file with
defines for:

- kvm_entry and kvm_exit events,
- exit reason field name in kvm_exit event,
- length of exit reasons strings,
- vcpu_id field name in kvm trace events,

and replace literals in perf-kvm.

Reviewed-by: Cornelia Huck <[email protected]>
Reviewed-by David Ahern <[email protected]>
Signed-off-by: Alexander Yarygin <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Cornelia Huck <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

show more ...

UAPI: (Scripted) Disintegrate arch/x86/include/asm

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by:

UAPI: (Scripted) Disintegrate arch/x86/include/asm

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Michael Kerrisk <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Acked-by: Dave Jones <[email protected]>

show more ...

UAPI: (Scripted) Set up UAPI Kbuild files

Set up empty UAPI Kbuild files to be populated by the header splitter.

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <arnd@arn

UAPI: (Scripted) Set up UAPI Kbuild files

Set up empty UAPI Kbuild files to be populated by the header splitter.

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Acked-by: Dave Jones <[email protected]>

show more ...