sparc64: Fix number of online CPUs

Nick Bowler reported:
When using newer kernels on my Ultra 60 with dual 450MHz UltraSPARC-II
CPUs, I noticed that only CPU 0 comes up, while older kernels

sparc64: Fix number of online CPUs

Nick Bowler reported:
When using newer kernels on my Ultra 60 with dual 450MHz UltraSPARC-II
CPUs, I noticed that only CPU 0 comes up, while older kernels (including
4.7) are working fine with both CPUs.

I bisected the failure to this commit:

9b2f753ec23710aa32c0d837d2499db92fe9115b is the first bad commit
commit 9b2f753ec23710aa32c0d837d2499db92fe9115b
Author: Atish Patra <[email protected]>
Date: Thu Sep 15 14:54:40 2016 -0600

sparc64: Fix cpu_possible_mask if nr_cpus is set

This is a small change that reverts very easily on top of 5.18: there is
just one trivial conflict. Once reverted, both CPUs work again.

Maybe this is related to the fact that the CPUs on this system are
numbered CPU0 and CPU2 (there is no CPU1)?

The current code that adjust cpu_possible based on nr_cpu_ids do not
take into account that CPU's may not come one after each other.
Move the chech to the function that setup the cpu_possible mask
so there is no need to adjust it later.

Signed-off-by: Sam Ravnborg <[email protected]>
Fixes: 9b2f753ec237 ("sparc64: Fix cpu_possible_mask if nr_cpus is set")
Reported-by: Nick Bowler <[email protected]>
Tested-by: Nick Bowler <[email protected]>
Link: https://lore.kernel.org/sparclinux/[email protected]/
Link: https://lore.kernel.org/all/CADyTPEwt=ZNams+1bpMB1F9w_vUdPsGCt92DBQxxq_VtaLoTdw@mail.gmail.com/
Cc: [email protected] # v4.8+
Cc: Andreas Larsson <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Atish Patra <[email protected]>
Cc: Bob Picco <[email protected]>
Cc: Vijay Kumar <[email protected]>
Cc: David S. Miller <[email protected]>
Reviewed-by: Andreas Larsson <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Andreas Larsson <[email protected]>

show more ...

sparc64: Fix prototype warning for alloc_irqstack_bootmem

Fix the following warning:
arch/sparc/kernel/setup_64.c:602:13: warning: no previous prototype for ‘alloc_irqstack_bootmem’

The function al

sparc64: Fix prototype warning for alloc_irqstack_bootmem

Fix the following warning:
arch/sparc/kernel/setup_64.c:602:13: warning: no previous prototype for ‘alloc_irqstack_bootmem’

The function alloc_irqstack_bootmem had no users outside setup_64.c so
declare it static.

Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Andreas Larsson <[email protected]>
Cc: David S. Miller <[email protected]>
Reviewed-by: Andreas Larsson <[email protected]>
Tested-by: Andreas Larsson <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Andreas Larsson <[email protected]>

show more ...

vgacon, arch/*: remove unused screen_info definitions

A number of architectures either kept the screen_info definition for
historical purposes as it used to be required by the generic VT code, or
th

vgacon, arch/*: remove unused screen_info definitions

A number of architectures either kept the screen_info definition for
historical purposes as it used to be required by the generic VT code, or
they copied it from another architecture in order to build the VGA console
driver in an allmodconfig build. The mips definition is used by some
platforms, but the initialization on jazz is not needed.

Now that vgacon no longer builds on these architectures, remove the
stale definitions and initializations.

Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Acked-by: Dinh Nguyen <[email protected]>
Acked-by: Max Filippov <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Acked-by: Guo Ren <[email protected]>
Acked-by: Helge Deller <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sparc64: Replace all non-returning strlcpy with strscpy

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to line

sparc64: Replace all non-returning strlcpy with strscpy

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

sparc64: get rid of fake_swapper_regs

no reason to have ->kregs of initial thread set up in a special
way - we can keep them on stack, same as for every other thread.

Signed-off-by: Al Viro <viro@z

sparc64: get rid of fake_swapper_regs

no reason to have ->kregs of initial thread set up in a special
way - we can keep them on stack, same as for every other thread.

Signed-off-by: Al Viro <[email protected]>

show more ...

initrd: remove support for multiple floppies

Remove the special handling for multiple floppies in the initrd code.
No one should be using floppies for booting these days. (famous last
words..)

Incl

initrd: remove support for multiple floppies

Remove the special handling for multiple floppies in the initrd code.
No one should be using floppies for booting these days. (famous last
words..)

Includes a spelling fix from Colin Ian King <[email protected]>.

Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Linus Torvalds <[email protected]>

show more ...

mm: don't include asm/pgtable.h if linux/mm.h is already included

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset

mm: don't include asm/pgtable.h if linux/mm.h is already included

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done

Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

arch/sparc/setup: Drop dummy_con initialization

con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.

Signed-off-by: Arvind Sankar <[email protected]

arch/sparc/setup: Drop dummy_con initialization

con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.

Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sparc: add checks for the return value of memblock_alloc*()

Add panic() calls if memblock_alloc*() returns NULL.

Most of the changes are simply addition of

if(!ptr)
panic()

sparc: add checks for the return value of memblock_alloc*()

Add panic() calls if memblock_alloc*() returns NULL.

Most of the changes are simply addition of

if(!ptr)
panic();

statements after the calls to memblock_alloc*() variants.

Exceptions are pcpu_populate_pte() and kernel_map_range() that were
slightly refactored to accommodate the change.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Acked-by: David S. Miller <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Guo Ren <[email protected]> [c-sky]
Cc: Heiko Carstens <[email protected]>
Cc: Juergen Gross <[email protected]> [Xen]
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sparc: Set "ARCH: sunxx" information on the same line

While checking boot log from SPARC qemu, I saw that the "ARCH: sunxx"
information was split on two different line.
This patchs merge both line t

sparc: Set "ARCH: sunxx" information on the same line

While checking boot log from SPARC qemu, I saw that the "ARCH: sunxx"
information was split on two different line.
This patchs merge both line together.
In the meantime, thoses information need to be printed via pr_info
since printk print them by default via the warning loglevel.

Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled

Only the mount namespace code that implements mount(2) should be using the
MS_* flags. Suppress them inside the kernel unles

vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled

Only the mount namespace code that implements mount(2) should be using the
MS_* flags. Suppress them inside the kernel unless uapi/linux/mount.h is
included.

Signed-off-by: David Howells <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Reviewed-by: David Howells <[email protected]>

show more ...

mm: remove include/linux/bootmem.h

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced

mm: remove include/linux/bootmem.h

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[[email protected]: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Serge Semin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

memblock: replace __alloc_bootmem_node with appropriate memblock_ API

Use memblock_alloc_try_nid whenever goal (i.e. minimal address is
specified) and memblock_alloc_node otherwise.

Link: http://lk

memblock: replace __alloc_bootmem_node with appropriate memblock_ API

Use memblock_alloc_try_nid whenever goal (i.e. minimal address is
specified) and memblock_alloc_node otherwise.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Serge Semin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sparc64: Add support for ADI (Application Data Integrity)

ADI is a new feature supported on SPARC M7 and newer processors to allow
hardware to catch rogue accesses to memory. ADI is supported for da

sparc64: Add support for ADI (Application Data Integrity)

ADI is a new feature supported on SPARC M7 and newer processors to allow
hardware to catch rogue accesses to memory. ADI is supported for data
fetches only and not instruction fetches. An app can enable ADI on its
data pages, set version tags on them and use versioned addresses to
access the data pages. Upper bits of the address contain the version
tag. On M7 processors, upper four bits (bits 63-60) contain the version
tag. If a rogue app attempts to access ADI enabled data pages, its
access is blocked and processor generates an exception. Please see
Documentation/sparc/adi.txt for further details.

This patch extends mprotect to enable ADI (TSTATE.mcde), enable/disable
MCD (Memory Corruption Detection) on selected memory ranges, enable
TTE.mcd in PTEs, return ADI parameters to userspace and save/restore ADI
version tags on page swap out/in or migration. ADI is not enabled by
default for any task. A task must explicitly enable ADI on a memory
range and set version tag for ADI to be effective for the task.

Signed-off-by: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sparc64: speed up etrap/rtrap on NG2 and later processors

For many sun4v processor types, reading or writing a privileged register
has a latency of 40 to 70 cycles. Use a combination of the low-lat

sparc64: speed up etrap/rtrap on NG2 and later processors

For many sun4v processor types, reading or writing a privileged register
has a latency of 40 to 70 cycles. Use a combination of the low-latency
allclean, otherw, normalw, and nop instructions in etrap and rtrap to
replace 2 rdpr and 5 wrpr instructions and improve etrap/rtrap
performance. allclean, otherw, and normalw are available on NG2 and
later processors.

The average ticks to execute the flush windows trap ("ta 0x3") with and
without this patch on select platforms:

CPU Not patched Patched % Latency Reduction

NG2 1762 1558 -11.58
NG4 3619 3204 -11.47
M7 3015 2624 -12.97
SPARC64-X 829 770 -7.12

Signed-off-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc64: Use CPU_POKE to resume idle cpu

Use CPU_POKE hypervisor call to resume idle cpu if supported.

Signed-off-by: Vijay Kumar <[email protected]>
Reviewed-by: Anthony Yznaga <anthony.yz

sparc64: Use CPU_POKE to resume idle cpu

Use CPU_POKE hypervisor call to resume idle cpu if supported.

Signed-off-by: Vijay Kumar <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc64: recognize and support sparc M8 cpu type

Recognize SPARC-M8 cpu type, hardware caps and cpu
distribution map.

Signed-off-by: Allen Pais <[email protected]>
Signed-off-by: David Aldridge

sparc64: recognize and support sparc M8 cpu type

Recognize SPARC-M8 cpu type, hardware caps and cpu
distribution map.

Signed-off-by: Allen Pais <[email protected]>
Signed-off-by: David Aldridge <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc64: initialize time early

In Linux it is possible to configure printk() to output timestamp next to
every line. This is very useful to determine the slow parts of the boot
process, and also to

sparc64: initialize time early

In Linux it is possible to configure printk() to output timestamp next to
every line. This is very useful to determine the slow parts of the boot
process, and also to avoid regressions, as boot time is visiable to
everyone.

Also, there are scripts that change these time stamps to intervals.

However, on larger machines these timestamps start appearing many seconds,
and even minutes into the boot process. This patch gets stick-frequency
property early from OpenBoot, and uses its value to initialize time stamps
before the first printk() messages are printed.

Signed-off-by: Pavel Tatashin <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Reviewed-by: Steven Sistare <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc64: remove trailing white spaces

A few changes that were reported by checkpatch, removed all trailing white
spaces in these two files.

Signed-off-by: Pavel Tatashin <[email protected]>

sparc64: remove trailing white spaces

A few changes that were reported by checkpatch, removed all trailing white
spaces in these two files.

Signed-off-by: Pavel Tatashin <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc: Remove redundant tests in boot_flags_init().

The test:

*commands && *commands == ' '

is equivalent to:

*commands == ' '

Reported-by: David Binderman <[email protected]>
Signed-off-by:

sparc: Remove redundant tests in boot_flags_init().

The test:

*commands && *commands == ' '

is equivalent to:

*commands == ' '

Reported-by: David Binderman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc64: Fix irq stack bootmem allocation.

Currently, irq stack bootmem is allocated for all possible cpus
before nr_cpus value changes the list of possible cpus. As a result,
there is unnecessary w

sparc64: Fix irq stack bootmem allocation.

Currently, irq stack bootmem is allocated for all possible cpus
before nr_cpus value changes the list of possible cpus. As a result,
there is unnecessary wastage of bootmemory.

Move the irq stack bootmem allocation so that it happens after
possible cpu list is modified based on nr_cpus value.

Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Bob Picco <[email protected]>
Reviewed-by: Vijay Kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc64: Fix cpu_possible_mask if nr_cpus is set

If kernel boot parameter nr_cpus is set, it should define the number
of CPUs that can ever be available in the system i.e.
cpu_possible_mask. setup_n

sparc64: Fix cpu_possible_mask if nr_cpus is set

If kernel boot parameter nr_cpus is set, it should define the number
of CPUs that can ever be available in the system i.e.
cpu_possible_mask. setup_nr_cpu_ids() overrides the nr_cpu_ids based
on the cpu_possible_mask during kernel initialization. If
cpu_possible_mask is not set based on the nr_cpus value, earlier part
of the kernel would be initialized using nr_cpus value leading to a
kernel crash.

Set cpu_possible_mask based on nr_cpus value. Thus setup_nr_cpu_ids()
becomes redundant and does not corrupt nr_cpu_ids value.

Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Bob Picco <[email protected]>
Reviewed-by: Vijay Kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc64: recognize and support Sonoma CPU type

Add code to recognize SPARC-Sonoma cpu correctly and update cpu hardware
caps and cpu distribution map. SPARC-Sonoma is based upon SPARC-M7 core
along

sparc64: recognize and support Sonoma CPU type

Add code to recognize SPARC-Sonoma cpu correctly and update cpu hardware
caps and cpu distribution map. SPARC-Sonoma is based upon SPARC-M7 core
along with additional PCI functions added on and is reported by firmware
as "SPARC-SN".

Signed-off-by: Khalid Aziz <[email protected]>
Acked-by: Allen Pais <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc: Convert naked unsigned uses to unsigned int

Use the more normal kernel definition/declaration style.

Done via:

$ git ls-files arch/sparc | \
xargs ./scripts/checkpatch.pl -f --fix-inplace

sparc: Convert naked unsigned uses to unsigned int

Use the more normal kernel definition/declaration style.

Done via:

$ git ls-files arch/sparc | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --types=unspecified_int

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...