arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabled

Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.

However, the very first thing the

arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabled

Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.

However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.

Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Tony Lindgren <[email protected]>
Tested-by: Ulf Hansson <[email protected]>
Reviewed-by: Gautham R. Shenoy <[email protected]>
Acked-by: Mark Rutland <[email protected]> [arm64]
Acked-by: Rafael J. Wysocki <[email protected]>
Acked-by: Guo Ren <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

fork: Generalize PF_IO_WORKER handling

Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any ta

fork: Generalize PF_IO_WORKER handling

Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.

The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.

The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

fork: Pass struct kernel_clone_args into copy_thread

With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.

The kernel

fork: Pass struct kernel_clone_args into copy_thread

With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.

The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.

Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.

v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

uaccess: remove CONFIG_SET_FS

There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.

This turns access_ok()

uaccess: remove CONFIG_SET_FS

There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.

This turns access_ok() into a cheaper check against TASK_SIZE_MAX.

As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().

Acked-by: Sam Ravnborg <[email protected]> # for sparc32 changes
Acked-by: "Eric W. Biederman" <[email protected]>
Tested-by: Sergey Matyukevich <[email protected]> # for arc changes
Acked-by: Stafford Horne <[email protected]> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

sched: Add wrapper for get_wchan() to keep task blocked

Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.

Suggested-by: Peter Zij

sched: Add wrapper for get_wchan() to keep task blocked

Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.

Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]> [arm]
Tested-by: Mark Rutland <[email protected]> [arm64]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

isystem: trim/fixup stdarg.h and other headers

Delete/fixup few includes in anticipation of global -isystem compile
option removal.

Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefi

isystem: trim/fixup stdarg.h and other headers

Delete/fixup few includes in anticipation of global -isystem compile
option removal.

Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition
of uintptr_t error (one definition comes from <stddef.h>, another from
<linux/types.h>).

Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

sched: Introduce task_is_running()

Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Davidl

sched: Introduce task_is_running()

Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

arch: setup PF_IO_WORKER threads like PF_KTHREAD

PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure

arch: setup PF_IO_WORKER threads like PF_KTHREAD

PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure that every arch sets up the PF_IO_WORKER threads like kthreads
in the arch implementation of copy_thread().

Signed-off-by: Jens Axboe <[email protected]>

show more ...

sparc: Replace test_ti_thread_flag() with test_tsk_thread_flag()

Use test_tsk_thread_flag() directly instead of test_ti_thread_flag() to
improve readability when the argument type is struct task_str

sparc: Replace test_ti_thread_flag() with test_tsk_thread_flag()

Use test_tsk_thread_flag() directly instead of test_ti_thread_flag() to
improve readability when the argument type is struct task_struct, it is
similar with commit 5afc78551bf5 ("arm64: Use test_tsk_thread_flag() for
checking TIF_SINGLESTEP").

Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc32: take ->thread.flags out

it was used for two things - dealing with unusual ->kregs for kernel
threads and "emulate unaligned userland accesses for this thread";
the former is killed off by t

sparc32: take ->thread.flags out

it was used for two things - dealing with unusual ->kregs for kernel
threads and "emulate unaligned userland accesses for this thread";
the former is killed off by the previous commit, the latter never
had been set in the first place.

Signed-off-by: Al Viro <[email protected]>

show more ...

sparc32: get rid of fake_swapper_regs

no reason to have ->kregs of initial thread set up in a special
way - we can keep them on stack, same as for every other thread.

Signed-off-by: Al Viro <viro@z

sparc32: get rid of fake_swapper_regs

no reason to have ->kregs of initial thread set up in a special
way - we can keep them on stack, same as for every other thread.

Signed-off-by: Al Viro <[email protected]>

show more ...

sched/idle: Fix arch_cpu_idle() vs tracing

We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.

Switch all arch_cpu_idle() i

sched/idle: Fix arch_cpu_idle() vs tracing

We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.

Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.

(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)

Reported-by: Sven Schnelle <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

mm: remove unneeded includes of <asm/pgalloc.h>

Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermedi

mm: remove unneeded includes of <asm/pgalloc.h>

Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.

In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>

In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.

This patch (of 8):

In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.

As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.

The process was somewhat automated using

sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))

where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.

[[email protected]: fix powerpc warning]

Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Pekka Enberg <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]> [m68k]
Cc: Abdul Haleem <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Satheesh Rajendran <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

kill unused dump_fpu() instances

dump_fpu() is used only on the architectures that support elf
and have neither CORE_DUMP_USE_REGSET nor ELF_CORE_COPY_FPREGS
defined.

Currently that's csky, m68k, m

kill unused dump_fpu() instances

dump_fpu() is used only on the architectures that support elf
and have neither CORE_DUMP_USE_REGSET nor ELF_CORE_COPY_FPREGS
defined.

Currently that's csky, m68k, microblaze, nds32 and unicore32. The rest
of the instances are dead code.

NB: THIS MUST GO AFTER ELF_FDPIC CONVERSION

Signed-off-by: Al Viro <[email protected]>

show more ...

arch: rename copy_thread_tls() back to copy_thread()

Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that o

arch: rename copy_thread_tls() back to copy_thread()

Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().

Cc: [email protected]
Acked-by: Thomas Bogendoerfer <[email protected]>A
Acked-by: Stafford Horne <[email protected]>
Acked-by: Greentime Hu <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>A
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>

show more ...

sparc: unconditionally enable HAVE_COPY_THREAD_TLS

Now that both sparc and sparc64 support copy_thread_tls() and don't rely
on do_fork() anymore, turn on HAVE_COPY_THREAD_TLS unconditionally. Once
a

sparc: unconditionally enable HAVE_COPY_THREAD_TLS

Now that both sparc and sparc64 support copy_thread_tls() and don't rely
on do_fork() anymore, turn on HAVE_COPY_THREAD_TLS unconditionally. Once
all architectures are switched over this macro will be removed and
the old do_fork() calling convention fully abandoned in favor of the
cleaner struct kernel_clone_args one.

Signed-off-by: Christian Brauner <[email protected]>
Acked-by: David S. Miller <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]

show more ...

sparc: share process creation helpers between sparc and sparc64

As promised in the previous patch, this moves the process creation
helpers into a common process.c file that is shared between sparc a

sparc: share process creation helpers between sparc and sparc64

As promised in the previous patch, this moves the process creation
helpers into a common process.c file that is shared between sparc and
sparc64. It allows us to get rid of quite a bit custom assembler and the
to remove the separe 32bit specific sparc_do_fork() call.

One thing to note, is that when clone() was called with a separate stack
for the child the assembler would align it. But copy_thread() has always
been doing that too so that line wasn't needed and can thus simply be
removed.

Signed-off-by: Christian Brauner <[email protected]>
Acked-by: David S. Miller <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]

show more ...

mm: don't include asm/pgtable.h if linux/mm.h is already included

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset

mm: don't include asm/pgtable.h if linux/mm.h is already included

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done

Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

kernel: rename show_stack_loglvl() => show_stack()

Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
a

kernel: rename show_stack_loglvl() => show_stack()

Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().

Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sparc: add show_stack_loglvl()

Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than th

sparc: add show_stack_loglvl()

Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.

Introduce show_stack_loglvl(), that eventually will substitute
show_stack().

[1]: https://lore.kernel.org/lkml/[email protected]/T/#u

Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: David S. Miller <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sparc: Use device_type helpers to access the node type

Remove directly accessing device_node.type pointer and use the accessors
instead. This will eventually allow removing the type pointer.

Replac

sparc: Use device_type helpers to access the node type

Remove directly accessing device_node.type pointer and use the accessors
instead. This will eventually allow removing the type pointer.

Replace the open coded iterating over child nodes with
for_each_child_of_node() while we're here.

Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

arch: remove unused macro/function thread_saved_pc()

The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d5597793 ("sched/core: Remove pointless printout in
sched_

arch: remove unused macro/function thread_saved_pc()

The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d5597793 ("sched/core: Remove pointless printout in
sched_show_task()"). Remove the implementations as well.

Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.

Signed-off-by: Tobias Klauser <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>

We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be pic

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>

We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>

We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>

We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...