sparc: replace #include <asm/export.h> with #include <linux/export.h>

Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/

sparc: replace #include <asm/export.h> with #include <linux/export.h>

Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.

Replace #include <asm/export.h> with #include <linux/export.h>.

After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.

Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>

show more ...

sparc32: Preserve clone syscall flags argument for restarts due to signals

This fixes a bug where a clone syscall that is restarted due to a
pending signal is restarted with garbage in the register

sparc32: Preserve clone syscall flags argument for restarts due to signals

This fixes a bug where a clone syscall that is restarted due to a
pending signal is restarted with garbage in the register %o0 that holds
the clone flags.

This keep the original %i0 of a syscall (as seen from the trap handler)
in %l6 rather than %l5. This is done because for clone (and also qfork)
%l5 is used as a temporary variable in the same register window. Before
this, that temporary value would be the value that was then incorrectly
used as the orig_i0 argument to do_notify_resume.

In order to preserve %l6, the temporary usage of %l6 in ret_sys_call is
changed to use %l5 instead and the setting %l6 to 0 or 1 was removed.
The use of that 0 or 1 value in %l6 was removed in commit
28e6103665301ce60634e8a77f0b657c6cc099de.

Signed-off-by: Andreas Larsson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc: share process creation helpers between sparc and sparc64

As promised in the previous patch, this moves the process creation
helpers into a common process.c file that is shared between sparc a

sparc: share process creation helpers between sparc and sparc64

As promised in the previous patch, this moves the process creation
helpers into a common process.c file that is shared between sparc and
sparc64. It allows us to get rid of quite a bit custom assembler and the
to remove the separe 32bit specific sparc_do_fork() call.

One thing to note, is that when clone() was called with a separate stack
for the child the assembler would align it. But copy_thread() has always
been doing that too so that line wasn't needed and can thus simply be
removed.

Signed-off-by: Christian Brauner <[email protected]>
Acked-by: David S. Miller <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]

show more ...

mm: reorder includes after introduction of linux/pgtable.h

The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with t

mm: reorder includes after introduction of linux/pgtable.h

The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.

import sys
import re

if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)

hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False

with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line

Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

mm: introduce include/linux/pgtable.h

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgta

mm: introduce include/linux/pgtable.h

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sparc: get rid of asm wrapper for nis_syscall()

just use current_pt_regs()

Signed-off-by: Al Viro <[email protected]>

sparc: get rid of sys_sparc_pipe() wrappers

just use current_pt_regs()

Signed-off-by: Al Viro <[email protected]>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sparc: move exports to definitions

Acked-by: David S. Miller <[email protected]>
Signed-off-by: Al Viro <[email protected]>

sparc32: drop hardcoding trap_level in kgdb_trap

Fix this so we pass the trap_level from the actual trap
code like we do in sparc64.
Add use on ENTRY(), ENDPROC() in the assembler function too.

Thi

sparc32: drop hardcoding trap_level in kgdb_trap

Fix this so we pass the trap_level from the actual trap
code like we do in sparc64.
Add use on ENTRY(), ENDPROC() in the assembler function too.

This fixes a bug where the hardcoded value for trap_level
was the sparc64 value.

As the generic code does not use the trap_level argument
(for sparc32) - this patch does not have any functional impact.

Signed-off-by: Sam Ravnborg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc: Fix misspellings in comments.

Signed-off-by: Adam Buchbinder <[email protected]>
Reviewed-by: Julian Calaby <[email protected]>
Signed-off-by: David S. Miller <[email protected]

sparc: Fix misspellings in comments.

Signed-off-by: Adam Buchbinder <[email protected]>
Reviewed-by: Julian Calaby <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc: Fix system call tracing register handling.

A system call trace trigger on entry allows the tracing
process to inspect and potentially change the traced
process's registers.

Account for that

sparc: Fix system call tracing register handling.

A system call trace trigger on entry allows the tracing
process to inspect and potentially change the traced
process's registers.

Account for that by reloading the %g1 (syscall number)
and %i0-%i5 (syscall argument) values. We need to be
careful to revalidate the range of %g1, and reload the
system call table entry it corresponds to into %l7.

Reported-by: Mike Frysinger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Tested-by: Mike Frysinger <[email protected]>

show more ...

sparc32: Fix exit flag passed from traced sys_sigreturn

Pass 1 in %o1 to indicate that syscall_trace accounts exit.

Signed-off-by: Kirill Tkhai <[email protected]>
CC: David Miller <[email protected]

sparc32: Fix exit flag passed from traced sys_sigreturn

Pass 1 in %o1 to indicate that syscall_trace accounts exit.

Signed-off-by: Kirill Tkhai <[email protected]>
CC: David Miller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc: switch to generic sigaltstack

Signed-off-by: Al Viro <[email protected]>

sparc32: switch to generic sys_execve()

Signed-off-by: Al Viro <[email protected]>

sparc32: switch to generic kernel_execve()

Signed-off-by: Al Viro <[email protected]>

sparc32: switch to generic kernel_thread()

Signed-off-by: Al Viro <[email protected]>

sparc32: bury the remnants of LOWSYS tricks

Time to end that depravity, let's bury the body. It's been
15 years, for crying out loud...

Signed-off-by: Al Viro <[email protected]>

sparc32: introduce support for run-time patching for all shared assembler code

All users of MMUREGS ASI in kernel/ now uses run-time patching.

Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Dan

sparc32: introduce support for run-time patching for all shared assembler code

All users of MMUREGS ASI in kernel/ now uses run-time patching.

Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Daniel Hellstrom <[email protected]>
Cc: Konrad Eisele <[email protected]>

show more ...

sparc32,leon: always include leon_smp + leon_mm in build

Fix-up leon specific assembler to use ASI_LEON_MMUREGS

Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Daniel Hellstrom <[email protected]

sparc32,leon: always include leon_smp + leon_mm in build

Fix-up leon specific assembler to use ASI_LEON_MMUREGS

Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Daniel Hellstrom <[email protected]>
Cc: Konrad Eisele <[email protected]>

show more ...

sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.h

GET_PROCESSOR4D_ID is completely unused, so delete it.

Move GET_PROCESSOR4M_ID to the sun4m specific trap code
which uses it.

We now no long

sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.h

GET_PROCESSOR4D_ID is completely unused, so delete it.

Move GET_PROCESSOR4M_ID to the sun4m specific trap code
which uses it.

We now no longer need to include asm/asi.h

Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc32: Kill off software 32-bit multiply/divide routines.

For the explicit calls to .udiv/.umul in assembler, I made a
mechanical (read as: safe) transformation. I didn't attempt
to make any simp

sparc32: Kill off software 32-bit multiply/divide routines.

For the explicit calls to .udiv/.umul in assembler, I made a
mechanical (read as: safe) transformation. I didn't attempt
to make any simplifications.

In particular, __ndelay and __udelay can be simplified significantly.
Some of the %y reads are unnecessary and these routines have no need
any longer for allocating a register window, they can be leaf
functions.

Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc32: Implement hard_smp_processor_id() via instruction patching.

This is the last non-trivial user of btfixup.

Like sparc64, use a special patch section to resolve the various
implementations o

sparc32: Implement hard_smp_processor_id() via instruction patching.

This is the last non-trivial user of btfixup.

Like sparc64, use a special patch section to resolve the various
implementations of how to read the current CPU's ID when we don't
have current_thread_info()->cpu necessarily available.

Signed-off-by: David S. Miller <[email protected]>
Tested-by: Sam Ravnborg <[email protected]>

show more ...

sparc32: Remove sparc_cpu_model read from floppy interrupt handler.

Since we no longer test the cpu model value, no need to load
it into a register any more.

It just gets overwritten in the next in

sparc32: Remove sparc_cpu_model read from floppy interrupt handler.

Since we no longer test the cpu model value, no need to load
it into a register any more.

It just gets overwritten in the next instruction anyways. :-)

Signed-off-by: David S. Miller <[email protected]>

show more ...

sparc32: Remove sun4c tlb/vac insn patching from entry.S

No longer used.

Signed-off-by: David S. Miller <[email protected]>