sh: ftrace: Fix missing prototypes

arch/sh/kernel/ftrace.c:130:6: warning: no previous prototype for ‘arch_ftrace_nmi_enter’ [-Wmissing-prototypes]
arch/sh/kernel/ftrace.c:140:6: warning: no previou

sh: ftrace: Fix missing prototypes

arch/sh/kernel/ftrace.c:130:6: warning: no previous prototype for ‘arch_ftrace_nmi_enter’ [-Wmissing-prototypes]
arch/sh/kernel/ftrace.c:140:6: warning: no previous prototype for ‘arch_ftrace_nmi_exit’ [-Wmissing-prototypes]
arch/sh/kernel/ftrace.c:316:6: warning: no previous prototype for ‘prepare_ftrace_return’ [-Wmissing-prototypes]

Fix this by moving existing forward declarations to <asm/ftrace.h>, and
adding the missing forward declaration for prepare_ftrace_return().

Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: John Paul Adrian Glaubitz <[email protected]>
Link: https://lore.kernel.org/r/910c8846a025e1c3b744a83ddf8e2816a3c5569d.1709326528.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <[email protected]>

show more ...

exit: Add and use make_task_dead.

There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something c

exit: Add and use make_task_dead.

There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

exit: Remove calls of do_exit after noreturn versions of die

On nds32, openrisc, s390, sh, and xtensa the function die never
returns. Mark die __noreturn so that no one expects die to return.
Remov

exit: Remove calls of do_exit after noreturn versions of die

On nds32, openrisc, s390, sh, and xtensa the function die never
returns. Mark die __noreturn so that no one expects die to return.
Remove the do_exit calls after die as they will never be reached.

Cc: Jonas Bonn <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: [email protected]
Cc: Nick Hu <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: [email protected]
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Fixes: 2.3.16
Fixes: 2.3.99-pre8
Fixes: 3f65ce4d141e ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 5")
Fixes: 664eec400bf8 ("nds32: MMU fault handling and page table management")
Fixes: 61e85e367535 ("OpenRISC: Memory management")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>

show more ...

sh: Remove unused variable

Removes this annoying warning:

arch/sh/kernel/traps.c: In function ‘nmi_trap_handler’:
arch/sh/kernel/traps.c:183:15: warning: unused variable ‘cpu’ [-Wunused-variable]

sh: Remove unused variable

Removes this annoying warning:

arch/sh/kernel/traps.c: In function ‘nmi_trap_handler’:
arch/sh/kernel/traps.c:183:15: warning: unused variable ‘cpu’ [-Wunused-variable]
183 | unsigned int cpu = smp_processor_id();

Fixes: fe3f1d5d7cd3 ("sh: Get rid of nmi_count()")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]

show more ...

sh: Get rid of nmi_count()

nmi_count() is a historical leftover and SH is the only user. Replace it
with regular per cpu accessors.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by:

sh: Get rid of nmi_count()

nmi_count() is a historical leftover and SH is the only user. Replace it
with regular per cpu accessors.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

maccess: rename probe_kernel_address to get_kernel_nofault

Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.

Also switch the argument order around, so that it

maccess: rename probe_kernel_address to get_kernel_nofault

Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.

Also switch the argument order around, so that it acts and looks
like get_user().

Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sh: add loglvl to dump_mem()

Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the

sh: add loglvl to dump_mem()

Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.

Add log level argument to dump_mem() as a preparation to introduce
show_stack_loglvl().

[1]: https://lore.kernel.org/lkml/[email protected]/T/#u

Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception

SuperH is the last remaining user of arch_ftrace_nmi_{enter,exit}(),
remove it from the generic code and into the SuperH code.

Signed

sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception

SuperH is the last remaining user of arch_ftrace_nmi_{enter,exit}(),
remove it from the generic code and into the SuperH code.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Alexandre Chartre <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

signal: Remove task parameter from force_sig

All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the futur

signal: Remove task parameter from force_sig

All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.

This also makes it clear force_sig passes current into force_sig_info.

Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>

We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be pic

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>

We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/debug.h>

We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up fro

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/debug.h>

We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>

We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up f

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>

We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sh: migrate exception table users off module.h and onto extable.h

These files were only including module.h for exception table
related functions. We've now separated that content out into its
own f

sh: migrate exception table users off module.h and onto extable.h

These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.

One uses "print_modules" so that prevents us removing module.h in
that case, however.

We also delete a duplicate prototype that doesn't need to exist, as
it duplicates content in extable.h

Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>

show more ...

taint: add explicit flag to show whether lock dep is still OK.

Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.

Sign

taint: add explicit flag to show whether lock dep is still OK.

Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.

Signed-off-by: Rusty Russell <[email protected]>

show more ...

sh: Consolidate die definitions for trap handlers.

This kills off the _64 versions and consolidates on the more robust _32
versions instead.

Signed-off-by: Paul Mundt <[email protected]>

Disintegrate asm/system.h for SH

Disintegrate asm/system.h for SH.

Signed-off-by: David Howells <[email protected]>
cc: [email protected]

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is stil

sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh64: Fix up the CONFIG_GENERIC_BUG=n build.

sh64 doesn't use GENERIC_BUG, which presently causes the handle_BUG()
code to blow up. Fix up the dependencies and get it all building again.

Signed-off

sh64: Fix up the CONFIG_GENERIC_BUG=n build.

sh64 doesn't use GENERIC_BUG, which presently causes the handle_BUG()
code to blow up. Fix up the dependencies and get it all building again.

Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: Count NMIs in irq_cpustat_t.

This plugs in support for NMI counting per-CPU via irq_cpustat_t.
Modelled after the x86 implementation.

Signed-off-by: Paul Mundt <[email protected]>

sh: nmi_debug support.

This implements support for NMI debugging that was shamelessly copied
from the avr32 port. A bit of special magic is needed in the interrupt
exception path given that the NMI

sh: nmi_debug support.

This implements support for NMI debugging that was shamelessly copied
from the avr32 port. A bit of special magic is needed in the interrupt
exception path given that the NMI exception handler is stubbed in to the
regular exception handling table despite being reported in INTEVT. So we
mangle the lookup and kick off an EXPEVT-style exception dispatch from
the INTEVT path for exceptions that do_IRQ() has no chance of handling.
As a result, we also drop the evt2irq() conversion from the do_IRQ() path
and just do it in assembly.

Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: unwinder: Use a special bug flag for unwinder traps.

This simplifies the unwinder trap handling, dropping the use of the
special trapa vector and simply piggybacking on top of the BUG support. A

sh: unwinder: Use a special bug flag for unwinder traps.

This simplifies the unwinder trap handling, dropping the use of the
special trapa vector and simply piggybacking on top of the BUG support. A
new BUGFLAG_UNWINDER is added for flagging the unwinder fault, before
continuing on with regular BUG dispatch.

Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: unwinder: Introduce UNWINDER_BUG() and UNWINDER_BUG_ON()

We can't assume that if we execute the unwinder code and the unwinder
was already running that it has faulted. Clearly two kernel threads

sh: unwinder: Introduce UNWINDER_BUG() and UNWINDER_BUG_ON()

We can't assume that if we execute the unwinder code and the unwinder
was already running that it has faulted. Clearly two kernel threads can
invoke the unwinder at the same time and may be running simultaneously.

The previous approach used BUG() and BUG_ON() in the unwinder code to
detect whether the unwinder was incapable of unwinding the stack, and
that the next available unwinder should be used instead. A better
approach is to explicitly invoke a trap handler to switch unwinders when
the current unwinder cannot continue.

Signed-off-by: Matt Fleming <[email protected]>

show more ...

sh: unbreak WARN_ON()

Fix WARN_ON() by modifying the bug trap handling code to
always return in the in-kernel instruction pointer case.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: P

sh: unbreak WARN_ON()

Fix WARN_ON() by modifying the bug trap handling code to
always return in the in-kernel instruction pointer case.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: Rename opcode_t to insn_size_t.

This is now clashing with a driver, so just rename it.

Signed-off-by: Paul Mundt <[email protected]>