License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sh: Remove sci_ick clock alias

The sh-sci driver falls back to the peripheral clock if the sci_ick
clock doesn't exist. There's thus no need to create an alias for the
peripheral clock named sci_ick

sh: Remove sci_ick clock alias

The sh-sci driver falls back to the peripheral clock if the sci_ick
clock doesn't exist. There's thus no need to create an alias for the
peripheral clock named sci_ick.

Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>

show more ...

sh: Switch to new style MTU2 device

The MTU2 (Multi-Function Timer Pulse Unit 2) driver implements a new
style of platform data that handles the timer as a single device with
multiple channel. Switc

sh: Switch to new style MTU2 device

The MTU2 (Multi-Function Timer Pulse Unit 2) driver implements a new
style of platform data that handles the timer as a single device with
multiple channel. Switch from the old-style platform data to the
new-style platform data.

Signed-off-by: Laurent Pinchart <[email protected]>
Tested-by: Wolfram Sang <[email protected]>
Signed-off-by: Simon Horman <[email protected]>

show more ...

sh: Switch to new style TMU device

The TMU (Timer Unit) driver implements a new style of platform data that
handles the timer as a single device with multiple channel. Switch from
the old-style plat

sh: Switch to new style TMU device

The TMU (Timer Unit) driver implements a new style of platform data that
handles the timer as a single device with multiple channel. Switch from
the old-style platform data to the new-style platform data.

Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Simon Horman <[email protected]>

show more ...

sh: Switch to new style CMT device

The CMT (Compare Match Timer) driver implements a new style of platform
data that handles the timer as a single device with multiple channel.
Switch from the old-s

sh: Switch to new style CMT device

The CMT (Compare Match Timer) driver implements a new style of platform
data that handles the timer as a single device with multiple channel.
Switch from the old-style platform data to the new-style platform data.

Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Simon Horman <[email protected]>

show more ...

sh: move CLKDEV_xxx_ID macro to sh_clk.h

Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <[email protected]>

ARM: 6483/1: arm & sh: factorised duplicated clkdev.c

factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.

as the code is identical at 99%

put the

ARM: 6483/1: arm & sh: factorised duplicated clkdev.c

factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.

as the code is identical at 99%

put the arch specific code for allocation as example in asm/clkdev.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Acked-by: Paul Mundt <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c

Move the CPG helpers to drivers/sh/clk-cpg.c V2.

This to allow SH-Mobile ARM to share the code with
SH. All functions except the legacy CPG

sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c

Move the CPG helpers to drivers/sh/clk-cpg.c V2.

This to allow SH-Mobile ARM to share the code with
SH. All functions except the legacy CPG stuff is moved.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: switch legacy clocks to clkdev

This patch converts the legacy clocks to register
using clkdev. Also the clock name is removed.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Pau

sh: switch legacy clocks to clkdev

This patch converts the legacy clocks to register
using clkdev. Also the clock name is removed.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: div4 reparent workaround

Update the div4 set_parent() callback to use the
flags instead of name to determine parent index.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mu

sh: div4 reparent workaround

Update the div4 set_parent() callback to use the
flags instead of name to determine parent index.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: provide some clock lookup aliases for legacy CPG parts.

For the CPUs that have not yet been converted off of legacy CPG we
provide some pclk aliases in order to make driver migration easier.

Si

sh: provide some clock lookup aliases for legacy CPG parts.

For the CPUs that have not yet been converted off of legacy CPG we
provide some pclk aliases in order to make driver migration easier.

Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: add sh7724 kick callback to clk_div4_table

This patch adds a ->kick() callback to clk_div4_table
and ties it into sh_clk_div4_set_rate(). A sh7724
specific kick function is also added that updat

sh: add sh7724 kick callback to clk_div4_table

This patch adds a ->kick() callback to clk_div4_table
and ties it into sh_clk_div4_set_rate(). A sh7724
specific kick function is also added that updates the
KICK bit whenever div4 clocks in FRQCRA and FRQCRB
have been set. Allows us to set the VPU clock.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: introduce struct clk_div4_table

This patch introduces struct clk_div4_table. The structure
will be used to keep div4 specific data, and is with this
patch replacing the struct clk_div_mult_table

sh: introduce struct clk_div4_table

This patch introduces struct clk_div4_table. The structure
will be used to keep div4 specific data, and is with this
patch replacing the struct clk_div_mult_table pointer arg
used by the sh_clk_div4_register() functions.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: clock-cpg div4 set_rate() shift fix

Make sure the div4 bitfield is shifted according
to the enable_bit value in sh_clk_div4_set_rate().

Signed-off-by: Magnus Damm <[email protected]>
Signed-of

sh: clock-cpg div4 set_rate() shift fix

Make sure the div4 bitfield is shifted according
to the enable_bit value in sh_clk_div4_set_rate().

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: support SIU sourcing from external clock on sh7722

Implement .set_rate() for all SH "div4 clocks," .enable(), .disable(), and
.set_parent() for those, that support them. This allows, among other

sh: support SIU sourcing from external clock on sh7722

Implement .set_rate() for all SH "div4 clocks," .enable(), .disable(), and
.set_parent() for those, that support them. This allows, among other uses,
reparenting of SIU clocks to the external source, and enabling and
disabling of the IrDA clock on sh7722.

Signed-off-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: use kzalloc() for cpg clocks

Convert the shared clock cpg code from bootmem to slab.
Without this patch the current bootmem code triggers
WARN_ON() because the slab is available.

Signed-off-by:

sh: use kzalloc() for cpg clocks

Convert the shared clock cpg code from bootmem to slab.
Without this patch the current bootmem code triggers
WARN_ON() because the slab is available.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: add enable()/disable()/set_rate() to div6 code

This patch updates the div6 clock helper code to add support
for enable(), disable() and set_rate() callbacks.

Needed by the camera clock enabling

sh: add enable()/disable()/set_rate() to div6 code

This patch updates the div6 clock helper code to add support
for enable(), disable() and set_rate() callbacks.

Needed by the camera clock enabling board code on Migo-R.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: clock div6 helper code

This patch adds div6 clock helper code. The div6 clocks
are simply 6-bit divide-by-n modules where n is 1 to 64.

Needed for vclk on sh7722, sh7723, sh7343 and sh7366.
sh7

sh: clock div6 helper code

This patch adds div6 clock helper code. The div6 clocks
are simply 6-bit divide-by-n modules where n is 1 to 64.

Needed for vclk on sh7722, sh7723, sh7343 and sh7366.
sh7724 needs this even more for vclk, fclka, fclkb,
irdaclk and spuclk.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: clock div4 frequency table offset fix

This patch fixes the per clock offset calculation in
sh_clk_div4_register(). Without this patch the offset
to the frequency table for each clock is incorrec

sh: clock div4 frequency table offset fix

This patch fixes the per clock offset calculation in
sh_clk_div4_register(). Without this patch the offset
to the frequency table for each clock is incorrect.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: shared div4 clock code

Add shared code for 4-bit divisor clocks.

Processor specific code can use SH_CLK_DIV4()
to initialize div4 clocks, and then use
sh_clk_div4_register() for registration.

sh: shared div4 clock code

Add shared code for 4-bit divisor clocks.

Processor specific code can use SH_CLK_DIV4()
to initialize div4 clocks, and then use
sh_clk_div4_register() for registration.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: shared mstp32 clock code

Add shared 32-bit module stop bit clock support.

Processor specific code can use SH_CLK_MSTP32()
to initialize module stop bit clocks, and then
use sh_clk_mstp32() for

sh: shared mstp32 clock code

Add shared 32-bit module stop bit clock support.

Processor specific code can use SH_CLK_MSTP32()
to initialize module stop bit clocks, and then
use sh_clk_mstp32() for registration.

Signed-off-by: Magnus Damm <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: clkfwk: Make clock-cpg usable for non-legacy platforms.

This adds a new SH_CLK_CPG for parts that have CPG support.
SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set
for pla

sh: clkfwk: Make clock-cpg usable for non-legacy platforms.

This adds a new SH_CLK_CPG for parts that have CPG support.
SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set
for platforms that want clock-cpg to register the legacy clocks. With
this new config item in place, it is now possible to start layering more
generic CPG code in place while other platforms transition off of the
legacy clocks.

Signed-off-by: Paul Mundt <[email protected]>

show more ...

sh: clkfwk: Rework legacy CPG clock handling.

This moves out the old legacy CPG clocks to their own file, and converts
over the existing users. With these clocks going away and each CPU
dealing with

sh: clkfwk: Rework legacy CPG clock handling.

This moves out the old legacy CPG clocks to their own file, and converts
over the existing users. With these clocks going away and each CPU
dealing with them on their own, CPUs can gradually move over to the new
interface.

Signed-off-by: Paul Mundt <[email protected]>

show more ...