vdso: Rename included Makefile

As the Makefile is included into other Makefiles it can not be used to
define objects to be built from the current source directory.
However the generic datastore will

vdso: Rename included Makefile

As the Makefile is included into other Makefiles it can not be used to
define objects to be built from the current source directory.
However the generic datastore will introduce such a local source file.
Rename the included Makefile so it is clear how it is to be used and to
make room for a regular Makefile in lib/vdso/.

Signed-off-by: Thomas Weißschuh <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]

show more ...

s390/Kconfig: Select VMAP_STACK unconditionally

There is no point in supporting !VMAP_STACK kernel builds. VMAP_STACK has
proven to work since many years. Also, since KASAN_VMALLOC is supported,
ker

s390/Kconfig: Select VMAP_STACK unconditionally

There is no point in supporting !VMAP_STACK kernel builds. VMAP_STACK has
proven to work since many years. Also, since KASAN_VMALLOC is supported,
kernels built with !VMAP_STACK are completely untested.

Therefore select VMAP_STACK unconditionally and remove all config options
and code required for !VMAP_STACK builds.

Acked-by: Christian Borntraeger <[email protected]>
Reviewed-by: Vasily Gorbik <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>

show more ...

s390/vdso: Wire up getrandom() vdso implementation

Provide the s390 specific vdso getrandom() architecture backend.

_vdso_rng_data required data is placed within the _vdso_data vvar page,
by using

s390/vdso: Wire up getrandom() vdso implementation

Provide the s390 specific vdso getrandom() architecture backend.

_vdso_rng_data required data is placed within the _vdso_data vvar page,
by using a hardcoded offset larger than vdso_data.

As required the chacha20 implementation does not write to the stack.

The implementation follows more or less the arm64 implementations and
makes use of vector instructions. It has a fallback to the getrandom()
system call for machines where the vector facility is not installed.

The check if the vector facility is installed, as well as an
optimization for machines with the vector-enhancements facility 2, is
implemented with alternatives, avoiding runtime checks.

Note that __kernel_getrandom() is implemented without the vdso user
wrapper which would setup a stack frame for odd cases (aka very old
glibc variants) where the caller has not done that. All callers of
__kernel_getrandom() are required to setup a stack frame, like the C ABI
requires it.

The vdso testcases vdso_test_getrandom and vdso_test_chacha pass.

Benchmark on a z16:

$ ./vdso_test_getrandom bench-single
vdso: 25000000 times in 0.493703559 seconds
syscall: 25000000 times in 6.584025337 seconds

Signed-off-by: Heiko Carstens <[email protected]>
Reviewed-by: Harald Freudenberger <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>

show more ...

Makefile: remove redundant tool coverage variables

Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.

Remove redundant variables.

Note:

This commit changes the covera

Makefile: remove redundant tool coverage variables

Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.

Remove redundant variables.

Note:

This commit changes the coverage for some objects:

- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV

I believe these are positive effects because all of them are kernel
space objects.

Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Tested-by: Roberto Sassu <[email protected]>

show more ...

s390/vdso: Use standard stack frame layout

By default user space is compiled with standard stack frame layout and not
with the packed stack layout. The vdso code however inherited the
-mpacked-stack

s390/vdso: Use standard stack frame layout

By default user space is compiled with standard stack frame layout and not
with the packed stack layout. The vdso code however inherited the
-mpacked-stack compiler option from the kernel. Remove this option to make
sure the vdso is compiled with standard stack frame layout.

This makes sure that the stack frame backchain location for vdso generated
stack frames is the same like for calling code (if compiled with default
options). This allows to manually walk stack frames without DWARF
information, like the kernel is doing it e.g. with arch_stack_walk_user().

Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Reviewed-by: Jens Remus <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>

show more ...

s390/vdso: Generate unwind information for C modules

GDB fails to unwind vDSO functions with error message "PC not saved",
for instance when stepping through gettimeofday().

Add -fasynchronous-unwi

s390/vdso: Generate unwind information for C modules

GDB fails to unwind vDSO functions with error message "PC not saved",
for instance when stepping through gettimeofday().

Add -fasynchronous-unwind-tables to CFLAGS to generate .eh_frame
DWARF unwind information for the vDSO C modules.

Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Signed-off-by: Jens Remus <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>

show more ...

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention withou

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:

src := $(obj)

When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.

This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.

To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.

Going forward, the variables used in Makefiles will have the following
meanings:

$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree

Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).

Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>

show more ...

arch: use $(obj)/ instead of $(src)/ for preprocessed linker scripts

These are generated files. Prefix them with $(obj)/ instead of $(src)/.

Signed-off-by: Masahiro Yamada <[email protected]>
Ac

arch: use $(obj)/ instead of $(src)/ for preprocessed linker scripts

These are generated files. Prefix them with $(obj)/ instead of $(src)/.

Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Helge Deller <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>

show more ...

s390/vdso64: filter out munaligned-symbols flag for vdso

Gcc recently implemented an optimization [1] for loading symbols without
explicit alignment, aligning with the IBM Z ELF ABI. This ABI mandat

s390/vdso64: filter out munaligned-symbols flag for vdso

Gcc recently implemented an optimization [1] for loading symbols without
explicit alignment, aligning with the IBM Z ELF ABI. This ABI mandates
symbols to reside on a 2-byte boundary, enabling the use of the larl
instruction. However, kernel linker scripts may still generate unaligned
symbols. To address this, a new -munaligned-symbols option has been
introduced [2] in recent gcc versions.

[1] https://gcc.gnu.org/pipermail/gcc-patches/2023-June/622872.html
[2] https://gcc.gnu.org/pipermail/gcc-patches/2023-August/625986.html

However, when -munaligned-symbols is used in vdso code, it leads to the
following compilation error:
`.data.rel.ro.local' referenced in section `.text' of
arch/s390/kernel/vdso64/vdso64_generic.o: defined in discarded section
`.data.rel.ro.local' of arch/s390/kernel/vdso64/vdso64_generic.o

vdso linker script discards .data section to make it lightweight.
However, -munaligned-symbols in vdso object files references literal
pool and accesses _vdso_data. Hence, compile vdso code without
-munaligned-symbols. This means in the future, vdso code should deal
with alignment of newly introduced unaligned linker symbols.

Acked-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sumanth Korikkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/vdso: drop '-fPIC' from LDFLAGS

'-fPIC' as an option to the linker does not do what it seems like it
should. With ld.bfd, it is treated as '-f PIC', which does not make
sense based on the meani

s390/vdso: drop '-fPIC' from LDFLAGS

'-fPIC' as an option to the linker does not do what it seems like it
should. With ld.bfd, it is treated as '-f PIC', which does not make
sense based on the meaning of '-f':

-f SHLIB, --auxiliary SHLIB Auxiliary filter for shared object symbol table

When building with ld.lld (currently under review in a GitHub pull
request), it just errors out because '-f' means nothing and neither does
'-fPIC':

ld.lld: error: unknown argument '-fPIC'

'-fPIC' was blindly copied from CFLAGS when the vDSO stopped being
linked with '$(CC)', it should not be needed. Remove it to clear up the
build failure with ld.lld.

Fixes: 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Link: https://github.com/llvm/llvm-project/pull/75643
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Fangrui Song <[email protected]>
Link: https://lore.kernel.org/r/20240130-s390-vdso-drop-fpic-from-ldflags-v1-1-094ad104fc55@kernel.org
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

kbuild: unify vdso_install rules

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just

kbuild: unify vdso_install rules

Currently, there is no standard implementation for vdso_install,
leading to various issues:

1. Code duplication

Many architectures duplicate similar code just for copying files
to the install destination.

Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.

2. Unintended updates of in-tree build artifacts

The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

3. Broken code in some architectures

Makefile code is often copied from one architecture to another
without proper adaptation.

'make vdso_install' for parisc does not work.

'make vdso_install' for s390 installs vdso64, but not vdso32.

To address these problems, this commit introduces a generic vdso_install
rule.

Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.

For example, arch/x86/Makefile looks like this:

vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg

These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.

vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.

The following is a snippet from arch/arm64/Makefile.

vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so

This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.

Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Sven Schnelle <[email protected]> # s390
Reviewed-by: Nicolas Schier <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Acked-by: Helge Deller <[email protected]> # parisc
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]>

show more ...

s390/vdso: filter out mno-pic-data-is-text-relative cflag

cmd_vdso_check checks if there are any dynamic relocations in
vdso64.so.dbg. When kernel is compiled with
-mno-pic-data-is-text-relative, R_

s390/vdso: filter out mno-pic-data-is-text-relative cflag

cmd_vdso_check checks if there are any dynamic relocations in
vdso64.so.dbg. When kernel is compiled with
-mno-pic-data-is-text-relative, R_390_RELATIVE relocs are generated and
this results in kernel build error.

kpatch uses -mno-pic-data-is-text-relative option when building the
kernel to prevent relative addressing between code and data. The flag
avoids relocation error when klp text and data are too far apart

kpatch does not patch vdso code and hence the
mno-pic-data-is-text-relative flag is not essential.

Signed-off-by: Sumanth Korikkar <[email protected]>
Acked-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>

show more ...

s390/vdso: check for undefined symbols after build

When adding an undefined symbol the build still succeeds, but
userspace is crashing trying to execute vdso because the
undefined symbol is not reso

s390/vdso: check for undefined symbols after build

When adding an undefined symbol the build still succeeds, but
userspace is crashing trying to execute vdso because the
undefined symbol is not resolved. Add the check for undefined
symbols to prevent this.

Signed-off-by: Sven Schnelle <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>

show more ...

vdso: Improve cmd_vdso_check to check all dynamic relocations

The actual intention is that no dynamic relocation exists in the VDSO. For
this the VDSO build validates that the resulting .so file doe

vdso: Improve cmd_vdso_check to check all dynamic relocations

The actual intention is that no dynamic relocation exists in the VDSO. For
this the VDSO build validates that the resulting .so file does not have any
relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture,
which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside
of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative
relocations too.

However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If
a port fails to determine the exact .rel[a].dyn size, the trailing zeros
become R_*_NONE relocations. E.g. ld's powerpc port recently fixed
https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are
generally a no-op in the dynamic loaders. So just ignore them.

Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting
.so file does not contain any R_* relocation entries except R_*_NONE.

Signed-off-by: Fangrui Song <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Vincenzo Frascino <[email protected]> # for aarch64
Reviewed-by: Christophe Leroy <[email protected]>
Reviewed-by: Vincenzo Frascino <[email protected]> # for vDSO, aarch64
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Link: https://lore.kernel.org/r/[email protected]

show more ...

s390/vdso: Drop '-shared' from KBUILD_CFLAGS_64

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
points out that there is a linking phase flag added to CFLAGS, which
will only be

s390/vdso: Drop '-shared' from KBUILD_CFLAGS_64

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
points out that there is a linking phase flag added to CFLAGS, which
will only be used for compiling

clang-16: error: argument unused during compilation: '-shared' [-Werror,-Wunused-command-line-argument]

'-shared' is already present in ldflags-y so it can just be dropped.

Fixes: 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Reviewed-by: Sven Schnelle <[email protected]>
Tested-by: Linux Kernel Functional Testing <[email protected]>
Tested-by: Anders Roxell <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

s390/vdso: Drop unused '-s' flag from KBUILD_AFLAGS_64

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:

clang-16: error: argument unused during compilation: '-s' [-Werro

s390/vdso: Drop unused '-s' flag from KBUILD_AFLAGS_64

When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:

clang-16: error: argument unused during compilation: '-s' [-Werror,-Wunused-command-line-argument]

The compiler's '-s' flag is a linking option (it is passed along to the
linker directly), which means it does nothing when the linker is not
invoked by the compiler. The kernel builds all .o files with '-c', which
stops the compilation pipeline before linking, so '-s' can be safely
dropped from KBUILD_AFLAGS_64.

Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Reviewed-by: Sven Schnelle <[email protected]>
Tested-by: Linux Kernel Functional Testing <[email protected]>
Tested-by: Anders Roxell <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

s390/vdso: filter out -mstack-guard and -mstack-size

When CONFIG_VMAP_STACK is disabled, the user can enable CONFIG_STACK_CHECK,
which adds a stack overflow check to each C function in the kernel. T

s390/vdso: filter out -mstack-guard and -mstack-size

When CONFIG_VMAP_STACK is disabled, the user can enable CONFIG_STACK_CHECK,
which adds a stack overflow check to each C function in the kernel. This is
also done for functions in the vdso page. These functions are run in user
context and user stack sizes are usually different to what the kernel uses.
This might trigger the stack check although the stack size is valid.
Therefore filter the -mstack-guard and -mstack-size flags when compiling
vdso C files.

Cc: [email protected] # 5.10+
Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Reported-by: Janosch Frank <[email protected]>
Signed-off-by: Sven Schnelle <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/vdso: remove -nostdlib compiler flag

The -nostdlib option requests the compiler to not use the standard
system startup files or libraries when linking. It is effective only
when $(CC) is used a

s390/vdso: remove -nostdlib compiler flag

The -nostdlib option requests the compiler to not use the standard
system startup files or libraries when linking. It is effective only
when $(CC) is used as a linker driver.

Since commit 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to
link vDSO"), $(LD) is directly used, hence -nostdlib is unneeded.

Signed-off-by: Masahiro Yamada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390: enable KCSAN

s390x GCC and SystemZ Clang have ThreadSanitizer support now [1] [2],
so enable KCSAN for s390.

[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=ea22954e7c58
[2] https://reviews

s390: enable KCSAN

s390x GCC and SystemZ Clang have ThreadSanitizer support now [1] [2],
so enable KCSAN for s390.

[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=ea22954e7c58
[2] https://reviews.llvm.org/D105629

Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/vdso: add minimal compat vdso

Add a small vdso for 31 bit compat application that provides
trampolines for calls to sigreturn,rt_sigreturn,syscall_restart.
This is requird for moving these sysc

s390/vdso: add minimal compat vdso

Add a small vdso for 31 bit compat application that provides
trampolines for calls to sigreturn,rt_sigreturn,syscall_restart.
This is requird for moving these syscalls away from the signal
frame to the vdso. Note that this patch effectively disables
CONFIG_COMPAT when using clang to compile the kernel. clang
doesn't support 31 bit mode.

We want to redirect sigreturn and restart_syscall to the vdso. However,
the kernel cannot parse the ELF vdso file, so we need to generate header
files which contain the offsets of the syscall instructions in the vdso
page.

Signed-off-by: Sven Schnelle <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390/vdso: reimplement getcpu vdso syscall

Implement the previously removed getcpu vdso syscall by using the
TOD programmable field to pass the cpu number to user space.

Reviewed-by: Sven Schnelle

s390/vdso: reimplement getcpu vdso syscall

Implement the previously removed getcpu vdso syscall by using the
TOD programmable field to pass the cpu number to user space.

Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/mm: remove set_fs / rework address space handling

Remove set_fs support from s390. With doing this rework address space
handling and simplify it. As a result address spaces are now setup
like t

s390/mm: remove set_fs / rework address space handling

Remove set_fs support from s390. With doing this rework address space
handling and simplify it. As a result address spaces are now setup
like this:

CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE
----------------------------|-----------|-----------|-----------
user space | user | user | kernel
kernel, normal execution | kernel | user | kernel
kernel, kvm guest execution | gmap | user | kernel

To achieve this the getcpu vdso syscall is removed in order to avoid
secondary address mode and a separate vdso address space in for user
space. The getcpu vdso syscall will be implemented differently with a
subsequent patch.

The kernel accesses user space always via secondary address space.
This happens in different ways:
- with mvcos in home space mode and directly read/write to secondary
address space
- with mvcs/mvcp in primary space mode and copy from primary space to
secondary space or vice versa
- with e.g. cs in secondary space mode and access secondary space

Switching translation modes happens with sacf before and after
instructions which access user space, like before.

Lazy handling of control register reloading is removed in the hope to
make everything simpler, but at the cost of making kernel entry and
exit a bit slower. That is: on kernel entry the primary asce is always
changed to contain the kernel asce, and on kernel exit the primary
asce is changed again so it contains the user asce.

In kernel mode there is only one exception to the primary asce: when
kvm guests are executed the primary asce contains the gmap asce (which
describes the guest address space). The primary asce is reset to
kernel asce whenever kvm guest execution is interrupted, so that this
doesn't has to be taken into account for any user space accesses.

Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

kbuild: explicitly specify the build id style

ld's --build-id defaults to "sha1" style, while lld defaults to "fast".
The build IDs are very different between the two, which may confuse
programs tha

kbuild: explicitly specify the build id style

ld's --build-id defaults to "sha1" style, while lld defaults to "fast".
The build IDs are very different between the two, which may confuse
programs that reference them.

Signed-off-by: Bill Wendling <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

s390: disable branch profiling for vdso

When branch profiling is enabled, if () gets annotated with code to
instrument the hit/miss ratio. This doesn't work for VDSO as we can't
access kernel code.

s390: disable branch profiling for vdso

When branch profiling is enabled, if () gets annotated with code to
instrument the hit/miss ratio. This doesn't work for VDSO as we can't
access kernel code. Add -DDISABLE_BRANCH_PROFILING to fix this.

Reported-by: Thomas Richter <[email protected]>
Signed-off-by: Sven Schnelle <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

arch: vdso: add vdso linker script to 'targets' instead of extra-y

The vdso linker script is preprocessed on demand.
Adding it to 'targets' is enough to include the .cmd file.

Signed-off-by: Masahi

arch: vdso: add vdso linker script to 'targets' instead of extra-y

The vdso linker script is preprocessed on demand.
Adding it to 'targets' is enough to include the .cmd file.

Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Greentime Hu <[email protected]>

show more ...