s390/traps: Change stack overflow message

When the kernel stack pointer is pointing to invalid memory,
a 'Kernel stack overflow' message is printed, which is misleading.
Change the message to actual

s390/traps: Change stack overflow message

When the kernel stack pointer is pointing to invalid memory,
a 'Kernel stack overflow' message is printed, which is misleading.
Change the message to actually say that the stack pointer is invalid
instead.

Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC

Add ftrace_graph_func() which is required for fprobe to access registers.
This also eliminates the need for calling prepare_ftrace_return() from
ftrace_ca

s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC

Add ftrace_graph_func() which is required for fprobe to access registers.
This also eliminates the need for calling prepare_ftrace_return() from
ftrace_caller().

Cc: Alexei Starovoitov <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: bpf <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Alan Maguire <[email protected]>
Cc: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/173519002875.391279.7060964632119674159.stgit@devnote2
Signed-off-by: Sven Schnelle <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>

show more ...

s390/switch_to: use generic header file

Move the switch_to() implementation to process.c and use the generic
switch_to.h header file instead, like some other architectures.

This addresses also the

s390/switch_to: use generic header file

Move the switch_to() implementation to process.c and use the generic
switch_to.h header file instead, like some other architectures.

This addresses also the oddity that the old switch_to() implementation
assigns the return value of __switch_to() to 'prev' instead of 'last',
like it should.

Remove also all includes of switch_to.h from C files, except process.c.

Acked-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

init: consolidate prototypes in linux/init.h

The init/main.c file contains some extern declarations for functions
defined in architecture code, and it defines some other functions that are
called fr

init: consolidate prototypes in linux/init.h

The init/main.c file contains some extern declarations for functions
defined in architecture code, and it defines some other functions that are
called from architecture code with a custom prototype. Both of those
result in warnings with 'make W=1':

init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
init/main.c:790:20: error: no previous prototype for 'mem_encrypt_init' [-Werror=missing-prototypes]
init/main.c:792:20: error: no previous prototype for 'poking_init' [-Werror=missing-prototypes]
arch/arm64/kernel/irq.c:122:13: error: no previous prototype for 'init_IRQ' [-Werror=missing-prototypes]
arch/arm64/kernel/time.c:55:13: error: no previous prototype for 'time_init' [-Werror=missing-prototypes]
arch/x86/kernel/process.c:935:13: error: no previous prototype for 'arch_post_acpi_subsys_init' [-Werror=missing-prototypes]
init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
kernel/fork.c:991:20: error: no previous prototype for 'arch_task_cache_init' [-Werror=missing-prototypes]

Add prototypes for all of these in include/linux/init.h or another
appropriate header, and remove the duplicate declarations from
architecture specific code.

[[email protected]: declare time_init_early()]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Eric Paris <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Russell King <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

s390: move __amode31_base declaration to proper header file

Move __amode31_base declaration to proper header file to get rid of

arch/s390/boot/startup.c:24:15:
warning: symbol '__amode31_base' was

s390: move __amode31_base declaration to proper header file

Move __amode31_base declaration to proper header file to get rid of

arch/s390/boot/startup.c:24:15:
warning: symbol '__amode31_base' was not declared. Should it be static?

Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390: simplify early program check handler

Due to historic reasons the base program check handler calls a
configurable function. Given that there is only the early program
check handler left, simpli

s390: simplify early program check handler

Due to historic reasons the base program check handler calls a
configurable function. Given that there is only the early program
check handler left, simplify the code by directly calling that
function.

The only other user was removed with commit d485235b0054 ("s390:
assume diag308 set always works").

Also rename all functions and the asm file to reflect this.

Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/extable: move EX_TABLE define to asm-extable.h

Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.

Also make sure that

s390/extable: move EX_TABLE define to asm-extable.h

Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.

Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.

Reviewed-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390/boot: allocate amode31 section in decompressor

The memory for amode31 section is allocated from the decompressed
kernel. Instead, allocate that memory from the decompressor. This
is a prerequis

s390/boot: allocate amode31 section in decompressor

The memory for amode31 section is allocated from the decompressed
kernel. Instead, allocate that memory from the decompressor. This
is a prerequisite to allow initialization of the virtual memory
before the decompressed kernel takes over.

Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390: remove do_signal() prototype and do_notify_resume() function

Both are no longer used since the conversion to generic
entry, therefore remove them.

Fixes: 56e62a737028 ("s390: convert to gener

s390: remove do_signal() prototype and do_notify_resume() function

Both are no longer used since the conversion to generic
entry, therefore remove them.

Fixes: 56e62a737028 ("s390: convert to generic entry")
Signed-off-by: Sven Schnelle <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390: rename dma section to amode31

The dma section name is confusing, since the code which resides within
that section has nothing to do with direct memory access. Instead the
limitation is that t

s390: rename dma section to amode31

The dma section name is confusing, since the code which resides within
that section has nothing to do with direct memory access. Instead the
limitation is that the code has to run in 31 bit addressing mode, and
therefore has to reside below 2GB. So the name was chosen since
ZONE_DMA is the same region.

To reduce confusion rename the section to amode31, which hopefully
describes better what this is about.

Note: this will also change vmcoreinfo strings
- SDMA=... gets renamed to SAMODE31=...
- EDMA=... gets renamed to EAMODE31=...

Acked-by: Vasily Gorbik <[email protected]>
Reviewed-by: Alexander Egorenkov <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/boot: move dma sections from decompressor to decompressed kernel

This change simplifies the task of making the decompressor relocatable.

The decompressor's image contains special DMA sections

s390/boot: move dma sections from decompressor to decompressed kernel

This change simplifies the task of making the decompressor relocatable.

The decompressor's image contains special DMA sections between _sdma and
_edma. This DMA segment is loaded at boot as part of the decompressor and
then simply handed over to the decompressed kernel. The decompressor itself
never uses it in any way. The primary reason for this is the need to keep
the aforementioned DMA segment below 2GB which is required by architecture,
and because the decompressor is always loaded at a fixed low physical
address, it is guaranteed that the DMA region will not cross the 2GB
memory limit. If the DMA region had been placed in the decompressed kernel,
then KASLR would make this guarantee impossible to fulfill or it would
be restricted to the first 2GB of memory address space.

This commit moves all DMA sections between _sdma and _edma from
the decompressor's image to the decompressed kernel's image. The complete
DMA region is placed in the init section of the decompressed kernel and
immediately relocated below 2GB at start-up before it is needed by other
parts of the decompressed kernel. The relocation of the DMA region happens
even if the decompressed kernel is already located below 2GB in order
to keep the first implementation simple. The relocation should not have
any noticeable impact on boot time because the DMA segment is only a couple
of pages.

After relocating the DMA sections, the kernel has to fix all references
which point into it. In order to automate this, place all variables
pointing into the DMA sections in a special .dma.refs section. All such
variables must be defined using the new __dma_ref macro. Only variables
containing addresses within the DMA sections must be placed in the new
.dma.refs section.

Furthermore, move the initialization of control registers from
the decompressor to the decompressed kernel because some control registers
reference tables that must be placed in the DMA data section to
guarantee that their addresses are below 2G. Because the decompressed
kernel relocates the DMA sections at startup, the content of control
registers CR2, CR5 and CR15 must be updated with new addresses after
the relocation. The decompressed kernel initializes all control registers
early at boot and then updates the content of CR2, CR5 and CR15
as soon as the DMA relocation has occurred. This practically reverts
the commit a80313ff91ab ("s390/kernel: introduce .dma sections").

Signed-off-by: Alexander Egorenkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/smp: fix do_restart() prototype

Funciton do_restart() is a callback invoked from the
restart CPU routine and passed a single parameter.

Signed-off-by: Alexander Gordeev <[email protected]

s390/smp: fix do_restart() prototype

Funciton do_restart() is a callback invoked from the
restart CPU routine and passed a single parameter.

Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/traps,mm: add conditional trap handlers

Add conditional trap handlers similar to conditional system calls
(COND_SYSCALL), to reduce the number of ifdefs.

Trap handlers which may or may not exi

s390/traps,mm: add conditional trap handlers

Add conditional trap handlers similar to conditional system calls
(COND_SYSCALL), to reduce the number of ifdefs.

Trap handlers which may or may not exist depending on config options
are supposed to have a COND_TRAP entry, which redirects to
default_trap_handler() for non-existent trap handlers during link
time.

This allows to get rid of the secure execution trap handlers for the
!PGSTE case.

Reviewed-by: Vasily Gorbik <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/traps: convert pgm_check.S to C

Convert the program check table to C. Which allows to get rid of yet
another assembler file, and also enables proper type checking for the
table.

Reviewed-by: A

s390/traps: convert pgm_check.S to C

Convert the program check table to C. Which allows to get rid of yet
another assembler file, and also enables proper type checking for the
table.

Reviewed-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390: convert to generic entry

This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.

There are a few special things on s390:

- PIF_PER_TRAP is moved to TIF_PER_TRAP

s390: convert to generic entry

This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.

There are a few special things on s390:

- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
know about our PIF flags in exit_to_user_mode_loop().

- The old code had several ways to restart syscalls:

a) PIF_SYSCALL_RESTART, which was only set during execve to force a
restart after upgrading a process (usually qemu-kvm) to pgste page
table extensions.

b) PIF_SYSCALL, which is set by do_signal() to indicate that the
current syscall should be restarted. This is changed so that
do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
PIF_SYSCALL doesn't work with the generic code, and changing it
to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
more unique.

- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.

The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.

CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.

Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390/mm: remove set_fs / rework address space handling

Remove set_fs support from s390. With doing this rework address space
handling and simplify it. As a result address spaces are now setup
like t

s390/mm: remove set_fs / rework address space handling

Remove set_fs support from s390. With doing this rework address space
handling and simplify it. As a result address spaces are now setup
like this:

CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE
----------------------------|-----------|-----------|-----------
user space | user | user | kernel
kernel, normal execution | kernel | user | kernel
kernel, kvm guest execution | gmap | user | kernel

To achieve this the getcpu vdso syscall is removed in order to avoid
secondary address mode and a separate vdso address space in for user
space. The getcpu vdso syscall will be implemented differently with a
subsequent patch.

The kernel accesses user space always via secondary address space.
This happens in different ways:
- with mvcos in home space mode and directly read/write to secondary
address space
- with mvcs/mvcp in primary space mode and copy from primary space to
secondary space or vice versa
- with e.g. cs in secondary space mode and access secondary space

Switching translation modes happens with sacf before and after
instructions which access user space, like before.

Lazy handling of control register reloading is removed in the hope to
make everything simpler, but at the cost of making kernel entry and
exit a bit slower. That is: on kernel entry the primary asce is always
changed to contain the kernel asce, and on kernel exit the primary
asce is changed again so it contains the user asce.

In kernel mode there is only one exception to the primary asce: when
kvm guests are executed the primary asce contains the gmap asce (which
describes the guest address space). The primary asce is reset to
kernel asce whenever kvm guest execution is interrupted, so that this
doesn't has to be taken into account for any user space accesses.

Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

show more ...

s390/kprobes: move insn_page to text segment

Move the in-kernel kprobes insn page to text segment. Rationale:
having that page in rw data segment is suboptimal, since as soon as a
kprobe is set, thi

s390/kprobes: move insn_page to text segment

Move the in-kernel kprobes insn page to text segment. Rationale:
having that page in rw data segment is suboptimal, since as soon as a
kprobe is set, this will split the 1:1 kernel mapping for a single
page which get new permissions.

Note: there is always at least one kprobe present for the kretprobe
trampoline; so the mapping will always be split into smaller 4k
mappings because of this.

Moving the kprobes insn page into text segment makes sure that the
page is mapped RO/X in any case, and avoids that the 1:1 mapping is
split.

The kprobe insn_page is defined as a dummy function which is filled
with "br %r14" instructions.

Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390: remove orphaned extern variables declarations

arch/s390/kernel/entry.h: suspend_zero_pages - only declaration left
after commit 394216275c7d ("s390: remove broken hibernate / power
management

s390: remove orphaned extern variables declarations

arch/s390/kernel/entry.h: suspend_zero_pages - only declaration left
after commit 394216275c7d ("s390: remove broken hibernate / power
management support")

arch/s390/include/asm/setup.h: vmhalt_cmd - only declaration left after
commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface")

arch/s390/include/asm/setup.h: vmpoff_cmd - only declaration left after
commit 99ca4e582d4a ("[S390] kernel: Shutdown Actions Interface")

Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390: remove orphaned function declarations

arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after
commit 05bc1be6db4b ("s390/pci: create zPCI bus")

arch/s390/include/asm/gmap.h: gmap

s390: remove orphaned function declarations

arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after
commit 05bc1be6db4b ("s390/pci: create zPCI bus")

arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left
after commit 4be130a08420 ("s390/mm: add shadow gmap support")

arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only
declaration left after commit 36409f6353fc ("[S390] use generic RCU
page-table freeing code")

arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left
after commit 5a79859ae0f3 ("s390: remove 31 bit support")

arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left
after commit b5f87f15e200 ("s390/idle: consolidate idle functions and
definitions")

arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left
after commit 386aa051fb4b ("s390/pci: remove per device debug attribute")

arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration
left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO")

arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left
after commit 67626fadd269 ("s390: enforce CONFIG_SMP")

arch/s390/kernel/entry.h: restart_call_handler - only declaration left
after commit 8b646bd75908 ("[S390] rework smp code")

arch/s390/kernel/entry.h: startup_init_nobss - only declaration left
after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed
kernel")

arch/s390/kernel/entry.h: s390_early_resume - only declaration left after
commit 394216275c7d ("s390: remove broken hibernate / power management
support")

drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only
declaration left after commit 33403dcfcdfd ("[S390] 3270 console:
convert from bootmem to slab")

drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only
declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw
device todos")

drivers/s390/char/tape.h: tape_hotplug_event - has only declaration
since recorded git history.

drivers/s390/char/tape.h: tape_oper_handler - has only declaration since
recorded git history.

drivers/s390/char/tape.h: tape_noper_handler - has only declaration
since recorded git history.

drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration
left after commit 161beff8f40d ("s390/tape: remove tape block leftovers")

drivers/s390/char/tape_std.h: tape_std_default_handler - has only
declaration since recorded git history.

drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only
declaration since recorded git history.

drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since
recorded git history.

drivers/s390/char/tape_std.h: tape_std_error_recovery - has only
declaration since recorded git history.

drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed -
has only declaration since recorded git history.

drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has
only declaration since recorded git history.

drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has
only declaration since recorded git history.

drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite -
has only declaration since recorded git history.

drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only
declaration since recorded git history.

Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390: add 3f program exception handler

Program exception 3f (secure storage violation) can only be detected
when the CPU is running in SIE with a format 4 state description,
e.g. running a protected

s390: add 3f program exception handler

Program exception 3f (secure storage violation) can only be detected
when the CPU is running in SIE with a format 4 state description,
e.g. running a protected guest. Because of this and because user
space partly controls the guest memory mapping and can trigger this
exception, we want to send a SIGSEGV to the process running the guest
and not panic the kernel.

Signed-off-by: Janosch Frank <[email protected]>
Cc: <[email protected]> # 5.7
Fixes: 084ea4d611a3 ("s390/mm: add (non)secure page access exceptions handlers")
Reviewed-by: Claudio Imbrenda <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

s390/mm: add (non)secure page access exceptions handlers

Add exceptions handlers performing transparent transition of non-secure
pages to secure (import) upon guest access and secure pages to
non-se

s390/mm: add (non)secure page access exceptions handlers

Add exceptions handlers performing transparent transition of non-secure
pages to secure (import) upon guest access and secure pages to
non-secure (export) upon hypervisor access.

Signed-off-by: Vasily Gorbik <[email protected]>
[[email protected]: adding checks for failures]
Signed-off-by: Janosch Frank <[email protected]>
[[email protected]: adding a check for gmap fault]
Signed-off-by: Claudio Imbrenda <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: Cornelia Huck <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
[[email protected]: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <[email protected]>

show more ...

s390: fix __EMIT_BUG() macro

Setting a kprobe on getname_flags() failed:

$ echo 'p:tmr1 getname_flags +0(%r2):ustring' > kprobe_events
-bash: echo: write error: Invalid argument

Debugging the kpro

s390: fix __EMIT_BUG() macro

Setting a kprobe on getname_flags() failed:

$ echo 'p:tmr1 getname_flags +0(%r2):ustring' > kprobe_events
-bash: echo: write error: Invalid argument

Debugging the kprobes code showed that the address of
getname_flags() is contained in the __bug_table. Kprobes
doesn't allow to set probes at BUG() locations.

$ objdump -j __bug_table -x build/fs/namei.o
[..]
0000000000000108 R_390_PC32 .text+0x00000000000075a8
000000000000010c R_390_PC32 .L223+0x0000000000000004

I was expecting getname_flags() to start with a BUG(), but:

7598: e3 20 10 00 00 04 lg %r2,0(%r1)
759e: c0 f4 00 00 00 00 jg 759e <putname+0x7e>
75a0: R_390_PLT32DBL kmem_cache_free+0x2
75a4: a7 f4 00 01 j 75a6 <putname+0x86>

00000000000075a8 <getname_flags>:
75a8: c0 04 00 00 00 00 brcl 0,75a8 <getname_flags>
75ae: eb 6f f0 48 00 24 stmg %r6,%r15,72(%r15)
75b4: b9 04 00 ef lgr %r14,%r15
75b8: e3 f0 ff a8 ff 71 lay %r15,-88(%r15)

So the BUG() is actually the last opcode of the previous function.
Fix this by switching to using the MONITOR CALL (MC) instruction,
and set the entry in __bug_table to the beginning of that MC.

Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

PM: hibernate: powerpc: Expose pfn_is_nosave() prototype

The declaration for pfn_is_nosave is only available in
kernel/power/power.h. Since this function can be override in arch,
expose it globally.

PM: hibernate: powerpc: Expose pfn_is_nosave() prototype

The declaration for pfn_is_nosave is only available in
kernel/power/power.h. Since this function can be override in arch,
expose it globally. Having a prototype will make sure to avoid warning
(sometime treated as error with W=1) such as:

arch/powerpc/kernel/suspend.c:18:5: error: no previous prototype for 'pfn_is_nosave' [-Werror=missing-prototypes]

This moves the declaration into a globally visible header file and add
missing include to avoid a warning on powerpc.

Also remove the duplicated prototypes since not required anymore.

Signed-off-by: Mathieu Malaterre <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

s390/ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR

Make the call chain more reliable by tagging the ftrace stack entries
with the stack pointer that is associated with the return address.

Signed-off

s390/ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR

Make the call chain more reliable by tagging the ftrace stack entries
with the stack pointer that is associated with the return address.

Signed-off-by: Martin Schwidefsky <[email protected]>

show more ...

s390: add support for virtually mapped kernel stacks

With virtually mapped kernel stacks the kernel stack overflow detection
is now fault based, every stack has a guard page in the vmalloc space.
Th

s390: add support for virtually mapped kernel stacks

With virtually mapped kernel stacks the kernel stack overflow detection
is now fault based, every stack has a guard page in the vmalloc space.
The panic_stack is renamed to nodat_stack and is used for all function
that need to run without DAT, e.g. memcpy_real or do_start_kdump.

The main effect is a reduction in the kernel image size as with vmap
stacks the old style overflow checking that adds two instructions per
function is not needed anymore. Result from bloat-o-meter:

add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042)

In regard to performance the micro-benchmark for fork has a hit of a
few microseconds, allocating 4 pages in vmalloc space is more expensive
compare to an order-2 page allocation. But with real workload I could
not find a noticeable difference.

Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>

show more ...