irqdomain: Rename irq_set_default_host() to irq_set_default_domain()

Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.

Therefore re

irqdomain: Rename irq_set_default_host() to irq_set_default_domain()

Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.

Therefore rename irq_set_default_host() to irq_set_default_domain().

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/all/[email protected]

show more ...

powerpc/ipic: Stop printing address of registers

The following line appears at boot:

IPIC (128 IRQ sources) at (ptrval)

This is pointless so remove the printing of the virtual address and
replace

powerpc/ipic: Stop printing address of registers

The following line appears at boot:

IPIC (128 IRQ sources) at (ptrval)

This is pointless so remove the printing of the virtual address and
replace it by matching physical address.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Link: https://patch.msgid.link/ecffb21d88405f99e7ffc906a733396c57c36d50.1736405302.git.christophe.leroy@csgroup.eu

show more ...

powerpc: Add missing headers

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for

powerpc: Add missing headers

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for pulling necessary headers.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu

show more ...

powerpc/sysdev: Add __init attribute to eligible functions

Some files functions in 'arch/powerpc/sysdev' are deserving of an `__init`
macro attribute. These functions are only called by other initia

powerpc/sysdev: Add __init attribute to eligible functions

Some files functions in 'arch/powerpc/sysdev' are deserving of an `__init`
macro attribute. These functions are only called by other initialization
functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.

Signed-off-by: Nick Child <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc/ipic: drop unused functions

ipic_set_highest_priority(), ipic_enable_mcp() and ipic_disable_mcp()
are unused. This patch drops them.

Signed-off-by: Christophe Leroy <[email protected]

powerpc/ipic: drop unused functions

ipic_set_highest_priority(), ipic_enable_mcp() and ipic_disable_mcp()
are unused. This patch drops them.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/ipic: Remove unused ipic_set_priority()

ipic_set_priority() has been unused since 2006 when the last usage was
removed in commit b9f0f1bb2bca ("[POWERPC] Adapt ipic driver to new
host_ops in

powerpc/ipic: Remove unused ipic_set_priority()

ipic_set_priority() has been unused since 2006 when the last usage was
removed in commit b9f0f1bb2bca ("[POWERPC] Adapt ipic driver to new
host_ops interface, add set_irq_type to set IRQ sense").

Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/sysdev/ipic: check primary_ipic NULL pointer before using it

ipic_get_mcp_status() is used by targets implementing NMI
watchdog in target specific machine check handler in order
to known whe

powerpc/sysdev/ipic: check primary_ipic NULL pointer before using it

ipic_get_mcp_status() is used by targets implementing NMI
watchdog in target specific machine check handler in order
to known whether a machine check results from a watchdog
NMI reset.

In case of very early machine check, primary_ipic pointer
might not have been set yet, so ipic_get_mcp_status() needs
to check it for nullity before using it.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/ipic: Fix status get and status clear

IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.

powerpc/ipic: Fix status get and status clear

IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/ipic: Support edge on IRQ0

External IRQ0 (index 48) has the same capabilities as the other IRQ1-7
and is handled by the same register IPIC_SEPNR. When this register is
not specified for "ack

powerpc/ipic: Support edge on IRQ0

External IRQ0 (index 48) has the same capabilities as the other IRQ1-7
and is handled by the same register IPIC_SEPNR. When this register is
not specified for "ack" in "ipic_info", you cannot configure this IRQ
as IRQ_TYPE_EDGE_FALLING. This oversight was probably due to the
non-contiguous hwirq numbering of IRQ0 in the IPIC.

Signed-off-by: Jurgen Schindele <[email protected]>
[scottwood: Cleaned up commit message and posted as a proper patch]
Signed-off-by: Scott Wood <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Remove all usages of NO_IRQ

NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change
platforms to use it")).

powerpc: Remove all usages of NO_IRQ

NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change
platforms to use it")). It's also 0 on most other arches.

Although it's fairly harmless, every now and then it causes confusion
when a driver is built on powerpc and another arch which doesn't define
NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
some of which are to work around that problem.

So we'd like to remove it. This is fairly trivial in the arch code, we
just convert:

if (irq == NO_IRQ) to if (!irq)
if (irq != NO_IRQ) to if (irq)
irq = NO_IRQ; to irq = 0;
return NO_IRQ; to return 0;

And a few other odd cases as well.

At least for now we keep the #define NO_IRQ, because there is driver
code that uses NO_IRQ and the fixes to remove those will go via other
trees.

Note we also change some occurrences in PPC sound drivers, drivers/ps3,
and drivers/macintosh.

Signed-off-by: Michael Ellerman <[email protected]>

show more ...

irqdomain: Use irq_domain_get_of_node() instead of direct field access

The struct irq_domain contains a "struct device_node *" field
(of_node) that is almost the only link between the irqdomain
and

irqdomain: Use irq_domain_get_of_node() instead of direct field access

The struct irq_domain contains a "struct device_node *" field
(of_node) that is almost the only link between the irqdomain
and the device tree infrastructure.

In order to prepare for the removal of that field, convert all
users to use irq_domain_get_of_node() instead.

Signed-off-by: Marc Zyngier <[email protected]>
Reviewed-and-tested-by: Hanjun Guo <[email protected]>
Tested-by: Lorenzo Pieralisi <[email protected]>
Cc: <[email protected]>
Cc: Tomasz Nowicki <[email protected]>
Cc: Suravee Suthikulpanit <[email protected]>
Cc: Graeme Gregory <[email protected]>
Cc: Jake Oshins <[email protected]>
Cc: Jiang Liu <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>

show more ...

powerpc/ipic: Use irq_set_handler_locked()

Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle:

@@
struct irq_data *

powerpc/ipic: Use irq_set_handler_locked()

Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle:

@@
struct irq_data *d;
expression E1;
@@

-__irq_set_handler_locked(d->irq, E1);
+irq_set_handler_locked(d, E1);

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Jiang Liu <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: [email protected]

show more ...

genirq/irqdomain: Allow irq domain aliasing

It is not uncommon (at least with the ARM stuff) to have a piece
of hardware that implements different flavours of "interrupts".
A typical example of this

genirq/irqdomain: Allow irq domain aliasing

It is not uncommon (at least with the ARM stuff) to have a piece
of hardware that implements different flavours of "interrupts".
A typical example of this is the GICv3 ITS, which implements
standard PCI/MSI support, but also some form of "generic MSI".

So far, the PCI/MSI domain is registered using the ITS device_node,
so that irq_find_host can return it. On the contrary, the raw MSI
domain is not registered with an device_node, making it impossible
to be looked up by another subsystem (obviously, using the same
device_node twice would only result in confusion, as it is not
defined which one irq_find_host would return).

A solution to this is to "type" domains that may be aliasing, and
to be able to lookup an device_node that matches a given type.
For this, we introduce irq_find_matching_host() as a superset
of irq_find_host:

struct irq_domain *irq_find_matching_host(struct device_node *node,
enum irq_domain_bus_token bus_token);

where bus_token is the "type" we want to match the domain against
(so far, only DOMAIN_BUS_ANY is defined). This result in some
moderately invasive changes on the PPC side (which is the only
user of the .match method).

This has otherwise no functionnal change.

Reviewed-by: Hanjun Guo <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: <[email protected]>
Cc: Yijing Wang <[email protected]>
Cc: Ma Jun <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Duc Dang <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Jiang Liu <[email protected]>
Cc: Jason Cooper <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>

show more ...

powerpc: Constify irq_domain_ops

The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gma

powerpc: Constify irq_domain_ops

The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Remove superfluous bootmem includes

Lots of places included bootmem.h even when not using bootmem.

Signed-off-by: Anton Blanchard <[email protected]>
Tested-by: Emil Medve <Emilian.Medve@Fre

powerpc: Remove superfluous bootmem includes

Lots of places included bootmem.h even when not using bootmem.

Signed-off-by: Anton Blanchard <[email protected]>
Tested-by: Emil Medve <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

irq_domain/powerpc: Replace custom xlate functions with library functions

This patch converts a number of the powerpc drivers to use the common library
of irq_domain xlate functions, dropping a bunc

irq_domain/powerpc: Replace custom xlate functions with library functions

This patch converts a number of the powerpc drivers to use the common library
of irq_domain xlate functions, dropping a bunch of lines in the process.

v5: - Remove tsi108 changes from patch

Signed-off-by: Grant Likely <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Milton Miller <[email protected]>
Tested-by: Olof Johansson <[email protected]>

show more ...

irq_domain: Replace irq_alloc_host() with revmap-specific initializers

Each revmap type has different arguments for setting up the revmap.
This patch splits up the generator functions so that each r

irq_domain: Replace irq_alloc_host() with revmap-specific initializers

Each revmap type has different arguments for setting up the revmap.
This patch splits up the generator functions so that each revmap type
can do its own setup and the user doesn't need to keep track of how
each revmap type handles the arguments.

This patch also adds a host_data argument to the generators. There are
cases where the host_data pointer will be needed before the function returns.
ie. the legacy map calls the .map callback for each irq before returning.

v2: - Add void *host_data argument to irq_domain_add_*() functions
- fixed failure to compile
- Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c

Signed-off-by: Grant Likely <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Milton Miller <[email protected]>
Tested-by: Olof Johansson <[email protected]>

show more ...

irq_domain/powerpc: Use common irq_domain structure instead of irq_host

This patch drops the powerpc-specific irq_host structures and uses the common
irq_domain strucutres defined in linux/irqdomain

irq_domain/powerpc: Use common irq_domain structure instead of irq_host

This patch drops the powerpc-specific irq_host structures and uses the common
irq_domain strucutres defined in linux/irqdomain.h. It also fixes all
the users to use the new structure names.

Renaming irq_host to irq_domain has been discussed for a long time, and this
patch is a step in the process of generalizing the powerpc virq code to be
usable by all architecture.

An astute reader will notice that this patch actually removes the irq_host
structure instead of renaming it. This is because the irq_domain structure
already exists in include/linux/irqdomain.h and has the needed data members.

Signed-off-by: Grant Likely <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Milton Miller <[email protected]>
Tested-by: Olof Johansson <[email protected]>

show more ...

treewide: Convert uses of struct resource to resource_size(ptr)

Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->sta

treewide: Convert uses of struct resource to resource_size(ptr)

Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

show more ...

PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM

Make some PowerPC architecture's code use struct syscore_ops
objects for power management instead of sysdev classes and sysdevs.

This

PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM

Make some PowerPC architecture's code use struct syscore_ops
objects for power management instead of sysdev classes and sysdevs.

This simplifies the code and reduces the kernel's memory footprint.
It also is necessary for removing sysdevs from the kernel entirely in
the future.

Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc/irq: Stop exporting irq_map

First step in eliminating irq_map[] table entirely

Signed-off-by: Benjamin Herrenschmidt <[email protected]>

powerpc: Convert to new irq_* function names

Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <[email protected]>

powerpc: ipic: Cleanup flow type handling

The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus.

The new core code allows to update t

powerpc: ipic: Cleanup flow type handling

The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus.

The new core code allows to update the type in irq_data and return
IRQ_SET_MASK_OK_NOCOPY, so the core code will not touch it, except for
setting the IRQ_LEVEL flag.

Use the proper accessors for setting the irq handlers.

Signed-off-by: Thomas Gleixner <[email protected]>

show more ...

powerpc: sysdev/ipic irq_data conversion.

Signed-off-by: Lennert Buytenhek <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>