powerpc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that

powerpc: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <[email protected]>
[mpe: Fixup maple/setup.c which needs platform_device]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

gpiolib: split of_mm_gpio_chip out of linux/of_gpio.h

This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.

Split it out with a separate header file and Kconfig optio

gpiolib: split of_mm_gpio_chip out of linux/of_gpio.h

This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.

Split it out with a separate header file and Kconfig option
so it can be removed on its own timeline aside from removing
the of_gpio consumer interfaces.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>

show more ...

powerpc/8xx: Don't set IMMR map anymore at boot

Only early debug requires IMMR to be mapped early.

No need to set it up and pin it in assembly. Map it
through page tables at udbg init when necessar

powerpc/8xx: Don't set IMMR map anymore at boot

Only early debug requires IMMR to be mapped early.

No need to set it up and pin it in assembly. Map it
through page tables at udbg init when necessary.

If CONFIG_PIN_TLB_IMMR is selected, pin it once we
don't need the 32 Mb pinned RAM anymore.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/13c1e8539fdf363d3146f4884e5c3c76c6c308b5.1589866984.git.christophe.leroy@csgroup.eu

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of ve

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 107 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Reviewed-by: Steve Winslow <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc/cpm1: fix compilation error with CONFIG_PPC_EARLY_DEBUG_CPM

commit e8cb7a55eb8dc ("powerpc: remove superflous inclusions of
asm/fixmap.h") removed inclusion of asm/fixmap.h from files not
in

powerpc/cpm1: fix compilation error with CONFIG_PPC_EARLY_DEBUG_CPM

commit e8cb7a55eb8dc ("powerpc: remove superflous inclusions of
asm/fixmap.h") removed inclusion of asm/fixmap.h from files not
including objects from that file.

However, asm/mmu-8xx.h includes call to __fix_to_virt(). The proper
way would be to include asm/fixmap.h in asm/mmu-8xx.h but it creates
an inclusion loop.

So we have to leave asm/fixmap.h in sysdep/cpm_common.c for
CONFIG_PPC_EARLY_DEBUG_CPM

CC arch/powerpc/sysdev/cpm_common.o
In file included from ./arch/powerpc/include/asm/mmu.h:340:0,
from ./arch/powerpc/include/asm/reg_8xx.h:8,
from ./arch/powerpc/include/asm/reg.h:29,
from ./arch/powerpc/include/asm/processor.h:13,
from ./arch/powerpc/include/asm/thread_info.h:28,
from ./include/linux/thread_info.h:38,
from ./arch/powerpc/include/asm/ptrace.h:159,
from ./arch/powerpc/include/asm/hw_irq.h:12,
from ./arch/powerpc/include/asm/irqflags.h:12,
from ./include/linux/irqflags.h:16,
from ./include/asm-generic/cmpxchg-local.h:6,
from ./arch/powerpc/include/asm/cmpxchg.h:537,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:5,
from ./include/linux/mutex.h:18,
from ./include/linux/kernfs.h:13,
from ./include/linux/sysfs.h:16,
from ./include/linux/kobject.h:20,
from ./include/linux/device.h:16,
from ./include/linux/node.h:18,
from ./include/linux/cpu.h:17,
from ./include/linux/of_device.h:5,
from arch/powerpc/sysdev/cpm_common.c:21:
arch/powerpc/sysdev/cpm_common.c: In function ‘udbg_init_cpm’:
./arch/powerpc/include/asm/mmu-8xx.h:218:25: error: implicit declaration of function ‘__fix_to_virt’ [-Werror=implicit-function-declaration]
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: error: ‘FIX_IMMR_BASE’ undeclared (first use in this function)
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: note: each undeclared identifier is reported only once for each function it appears in
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
cc1: all warnings being treated as errors
make[1]: *** [arch/powerpc/sysdev/cpm_common.o] Error 1

Fixes: e8cb7a55eb8dc ("powerpc: remove superflous inclusions of asm/fixmap.h")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/cpm1: fix compilation error with CONFIG_PPC_EARLY_DEBUG_CPM

commit e8cb7a55eb8dc ("powerpc: remove superflous inclusions of
asm/fixmap.h") removed inclusion of asm/fixmap.h from files not
in

powerpc/cpm1: fix compilation error with CONFIG_PPC_EARLY_DEBUG_CPM

commit e8cb7a55eb8dc ("powerpc: remove superflous inclusions of
asm/fixmap.h") removed inclusion of asm/fixmap.h from files not
including objects from that file.

However, asm/mmu-8xx.h includes call to __fix_to_virt(). The proper
way would be to include asm/fixmap.h in asm/mmu-8xx.h but it creates
an inclusion loop.

So we have to leave asm/fixmap.h in sysdep/cpm_common.c for
CONFIG_PPC_EARLY_DEBUG_CPM

CC arch/powerpc/sysdev/cpm_common.o
In file included from ./arch/powerpc/include/asm/mmu.h:340:0,
from ./arch/powerpc/include/asm/reg_8xx.h:8,
from ./arch/powerpc/include/asm/reg.h:29,
from ./arch/powerpc/include/asm/processor.h:13,
from ./arch/powerpc/include/asm/thread_info.h:28,
from ./include/linux/thread_info.h:38,
from ./arch/powerpc/include/asm/ptrace.h:159,
from ./arch/powerpc/include/asm/hw_irq.h:12,
from ./arch/powerpc/include/asm/irqflags.h:12,
from ./include/linux/irqflags.h:16,
from ./include/asm-generic/cmpxchg-local.h:6,
from ./arch/powerpc/include/asm/cmpxchg.h:537,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:5,
from ./include/linux/mutex.h:18,
from ./include/linux/kernfs.h:13,
from ./include/linux/sysfs.h:16,
from ./include/linux/kobject.h:20,
from ./include/linux/device.h:16,
from ./include/linux/node.h:18,
from ./include/linux/cpu.h:17,
from ./include/linux/of_device.h:5,
from arch/powerpc/sysdev/cpm_common.c:21:
arch/powerpc/sysdev/cpm_common.c: In function ‘udbg_init_cpm’:
./arch/powerpc/include/asm/mmu-8xx.h:218:25: error: implicit declaration of function ‘__fix_to_virt’ [-Werror=implicit-function-declaration]
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: error: ‘FIX_IMMR_BASE’ undeclared (first use in this function)
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
./arch/powerpc/include/asm/mmu-8xx.h:218:39: note: each undeclared identifier is reported only once for each function it appears in
#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
^
arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’
VIRT_IMMR_BASE);
^
cc1: all warnings being treated as errors
make[1]: *** [arch/powerpc/sysdev/cpm_common.o] Error 1

Fixes: e8cb7a55eb8dc ("powerpc: remove superflous inclusions of asm/fixmap.h")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

powerpc: remove superflous inclusions of asm/fixmap.h

Files not using fixmap consts or functions don't need asm/fixmap.h

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Mic

powerpc: remove superflous inclusions of asm/fixmap.h

Files not using fixmap consts or functions don't need asm/fixmap.h

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/sysdev: change CPM GPIO to platform_device

Since commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names()
to use device property accessors"), gpio chips have to have a
parent, otherwise d

powerpc/sysdev: change CPM GPIO to platform_device

Since commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names()
to use device property accessors"), gpio chips have to have a
parent, otherwise devprop_gpiochip_set_names() prematurely exists
with message "GPIO chip parent is NULL" and doesn't proceed
'gpio-line-names' DT property.

This patch wraps the CPM GPIO into a platform driver to allow
assignment of the parent device.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

soc/fsl/qe: fix Oops on CPM1 (and likely CPM2)

Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the

soc/fsl/qe: fix Oops on CPM1 (and likely CPM2)

Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the SLAB to be up and running.

On powerpc 8xx, cpm_reset() is called early during startup.
cpm_reset() then calls cpm_muram_init() before SLAB is available,
hence the following Oops.

cpm_reset() cannot be called during initcalls because the CPM is
needed for console.

This patch removes the call to cpm_muram_init() from cpm_reset().
cpm_muram_init() will be called from a new function called cpm_init()
which is declared as subsys_initcall, unless cpm_muram_alloc() is
called earlier for the serial console in which case cpm_muram_init()
will be called from there.

The reason for calling it from two places is that some drivers
(e.g. i2c-cpm) need some of the initialisations done by
cpm_muram_init() but don't call cpm_muram_alloc(). The console
driver calls cpm_muram_alloc() but some platforms might not use
the CPM serial ports for console.

[ 0.000000] Unable to handle kernel paging request for data at address 0x00000008
[ 0.000000] Faulting instruction address: 0xc01acce0
[ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[ 0.000000] PREEMPT CMPC885
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5
[ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000
[ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000
[ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn)
[ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000
[ 0.000000] DAR: 00000008 DSISR: c0000000
GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff
GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8
GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000
GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001
[ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc
[ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] Call Trace:
[ 0.000000] [c0537f00] [00000200] 0x200 (unreliable)
[ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8
[ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30
[ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168
[ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380
[ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98
[ 0.000000] Instruction dump:
[ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6
[ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f
[ 0.000000] ---[ end trace dc8fa200cb88537f ]---

fixes: 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
[scottwood: Removed some string changes unrelated to bugfix]
Signed-off-by: Scott Wood <[email protected]>

show more ...

powerpc: sysdev: cpm: fix gpio save_regs functions

of_mm_gpiochip_add_data() calls mm_gc->save_regs() before
setting the data. Therefore ->save_regs() cannot use
gpiochip_get_data()

[ 0.275940]

powerpc: sysdev: cpm: fix gpio save_regs functions

of_mm_gpiochip_add_data() calls mm_gc->save_regs() before
setting the data. Therefore ->save_regs() cannot use
gpiochip_get_data()

[ 0.275940] Unable to handle kernel paging request for data at address 0x00000130
[ 0.283120] Faulting instruction address: 0xc01b44cc
[ 0.288175] Oops: Kernel access of bad area, sig: 11 [#1]
[ 0.293343] PREEMPT CMPC885
[ 0.296141] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-g65124df-dirty #68
[ 0.304131] task: c6074000 ti: c6080000 task.ti: c6080000
[ 0.309459] NIP: c01b44cc LR: c0011720 CTR: c0011708
[ 0.314372] REGS: c6081d90 TRAP: 0300 Not tainted (4.7.0-g65124df-dirty)
[ 0.322267] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 24000028 XER: 20000000
[ 0.328813] DAR: 00000130 DSISR: c0000000
GPR00: c01b6d0c c6081e40 c6074000 c6017000 c9028000 c601d028 c6081dd8 00000000
GPR08: c601d028 00000000 ffffffff 00000001 24000044 00000000 c0002790 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c05643b0 00000083
GPR24: c04a1a6c c0560000 c04a8308 c04c6480 c0012498 c6017000 c7ffcc78 c6017000
[ 0.360806] NIP [c01b44cc] gpiochip_get_data+0x4/0xc
[ 0.365684] LR [c0011720] cpm1_gpio16_save_regs+0x18/0x44
[ 0.370972] Call Trace:
[ 0.373451] [c6081e50] [c01b6d0c] of_mm_gpiochip_add_data+0x70/0xdc
[ 0.379624] [c6081e70] [c00124c0] cpm_init_par_io+0x28/0x118
[ 0.385238] [c6081e80] [c04a8ac0] do_one_initcall+0xb0/0x17c
[ 0.390819] [c6081ef0] [c04a8cbc] kernel_init_freeable+0x130/0x1dc
[ 0.396924] [c6081f30] [c00027a4] kernel_init+0x14/0x110
[ 0.402177] [c6081f40] [c000b424] ret_from_kernel_thread+0x5c/0x64
[ 0.408233] Instruction dump:
[ 0.411168] 4182fafc 3f80c040 48234c6d 3bc0fff0 3b9c5ed0 4bfffaf4 81290020 712a0004
[ 0.418825] 4182fb34 48234c51 4bfffb2c 81230004 <80690130> 4e800020 7c0802a6 9421ffe0
[ 0.426763] ---[ end trace fe4113ee21d72ffa ]---

fixes: e65078f1f3490 ("powerpc: sysdev: cpm1: use gpiochip data pointer")
fixes: a14a2d484b386 ("powerpc: cpm_common: use gpiochip data pointer")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc/8xx: Fix vaddr for IMMR early remap

Memory: 124428K/131072K available (3748K kernel code, 188K rwdata,
648K rodata, 508K init, 290K bss, 6644K reserved)
Kernel virtual memory layout:
* 0xf

powerpc/8xx: Fix vaddr for IMMR early remap

Memory: 124428K/131072K available (3748K kernel code, 188K rwdata,
648K rodata, 508K init, 290K bss, 6644K reserved)
Kernel virtual memory layout:
* 0xfffdf000..0xfffff000 : fixmap
* 0xfde00000..0xfe000000 : consistent mem
* 0xfddf6000..0xfde00000 : early ioremap
* 0xc9000000..0xfddf6000 : vmalloc & ioremap
SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Today, IMMR is mapped 1:1 at startup

Mapping IMMR 1:1 is just wrong because it may overlap with another
area. On most mpc8xx boards it is OK as IMMR is set to 0xff000000
but for instance on EP88xC board, IMMR is at 0xfa200000 which
overlaps with VM ioremap area

This patch fixes the virtual address for remapping IMMR with the fixmap
regardless of the value of IMMR.

The size of IMMR area is 256kbytes (CPM at offset 0, security engine
at offset 128k) so a 512k page is enough

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

powerpc: cpm_common: use gpiochip data pointer

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc:

powerpc: cpm_common: use gpiochip data pointer

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Anatolij Gustschin <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>

show more ...

QE: Move QE from arch/powerpc to drivers/soc

ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm

Signed-off-by: Zhao Qiang <qiang.zhao@freescale

QE: Move QE from arch/powerpc to drivers/soc

ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm

Signed-off-by: Zhao Qiang <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

QE/CPM: move muram management functions to qe_common

QE and CPM have the same muram, they use the same management
functions. Now QE support both ARM and PowerPC, it is necessary
to move QE to "drive

QE/CPM: move muram management functions to qe_common

QE and CPM have the same muram, they use the same management
functions. Now QE support both ARM and PowerPC, it is necessary
to move QE to "driver/soc", so move the muram management functions
from cpm_common to qe_common for preparing to move QE code to "driver/soc"

Signed-off-by: Zhao Qiang <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

CPM/QE: use genalloc to manage CPM/QE muram

Use genalloc to manage CPM/QE muram instead of rheap.

Signed-off-by: Zhao Qiang <[email protected]>
Signed-off-by: Scott Wood <scottwood@freescale

CPM/QE: use genalloc to manage CPM/QE muram

Use genalloc to manage CPM/QE muram instead of rheap.

Signed-off-by: Zhao Qiang <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

powerpc: handle error case in cpm_muram_alloc()

rh_alloc() returns (unsigned long)-ERRxx on error, which may
result in overwriting memory outside the MURAM AREA.

Signed-off-by: Christophe Leroy <ch

powerpc: handle error case in cpm_muram_alloc()

rh_alloc() returns (unsigned long)-ERRxx on error, which may
result in overwriting memory outside the MURAM AREA.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

powerpc: use memset_io() to clear CPM Muram

CPM muram is not cached, so use memset_io() instead of memset()

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Scott Wood <scot

powerpc: use memset_io() to clear CPM Muram

CPM muram is not cached, so use memset_io() instead of memset()

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Scott Wood <[email protected]>

show more ...

powerpc: add explicit OF includes

When removing prom.h include by of.h, several OF headers will no longer
be implicitly included. Add explicit includes of of_*.h as needed.

Signed-off-by: Rob Herri

powerpc: add explicit OF includes

When removing prom.h include by of.h, several OF headers will no longer
be implicitly included. Add explicit includes of of_*.h as needed.

Signed-off-by: Rob Herring <[email protected]>
Acked-by: Grant Likely <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Anatolij Gustschin <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: [email protected]

show more ...

Disintegrate asm/system.h for PowerPC

Disintegrate asm/system.h for PowerPC.

Signed-off-by: David Howells <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
cc: linux

Disintegrate asm/system.h for PowerPC

Disintegrate asm/system.h for PowerPC.

Signed-off-by: David Howells <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
cc: [email protected]

show more ...

powerpc: add export.h to files making use of EXPORT_SYMBOL

With module.h being implicitly everywhere via device.h, the absence
of explicitly including something for EXPORT_SYMBOL went unnoticed.
Sin

powerpc: add export.h to files making use of EXPORT_SYMBOL

With module.h being implicitly everywhere via device.h, the absence
of explicitly including something for EXPORT_SYMBOL went unnoticed.
Since we are heading to fix things up and clean module.h from the
device.h file, we need to explicitly include these files now.

Signed-off-by: Paul Gortmaker <[email protected]>

show more ...

powerpc/cpm: Clear muram before it is in use.

We need to ensure that MURAM is in a known and cleared out state before
using it as the bootloader could have utilized it from its own purposes
and left

powerpc/cpm: Clear muram before it is in use.

We need to ensure that MURAM is in a known and cleared out state before
using it as the bootloader could have utilized it from its own purposes
and left it in an unknown state.

If we don't clear it out we've seen issues with UCC ethernet:
* Multi ethernet interfaces can't work simultanously.
* Multi up/down Ethernet interfaces will halt these ports.
* UCC1 RGMII can't work when kernel boots from some hosts.

Signed-off-by: Kai.Jiang <[email protected]>
Signed-off-by: Hongjun Chen <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>

show more ...

treewide: Convert uses of struct resource to resource_size(ptr)

Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->sta

treewide: Convert uses of struct resource to resource_size(ptr)

Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

show more ...

of/gpio: add default of_xlate function if device has a node pointer

Implement generic OF gpio hooks and thus make device-enabled GPIO chips
(i.e. the ones that have gpio_chip->dev specified) automa

of/gpio: add default of_xlate function if device has a node pointer

Implement generic OF gpio hooks and thus make device-enabled GPIO chips
(i.e. the ones that have gpio_chip->dev specified) automatically attach
to the OpenFirmware subsystem. Which means that now we can handle I2C and
SPI GPIO chips almost* transparently.

* "Almost" because some chips still require platform data, and for these
chips OF-glue is still needed, though with this change the glue will
be much smaller.

Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Grant Likely <[email protected]>
Cc: David Brownell <[email protected]>
Cc: Bill Gatliff <[email protected]>
Cc: Dmitry Eremin-Solenikov <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Jean Delvare <[email protected]>
Cc: Andrew Morton <[email protected]>
CC: [email protected]
CC: [email protected]

show more ...

of/gpio: Kill of_gpio_chip and add members directly to gpio_chip

The OF gpio infrastructure is great for describing GPIO connections within
the device tree. However, using a GPIO binding still requ

of/gpio: Kill of_gpio_chip and add members directly to gpio_chip

The OF gpio infrastructure is great for describing GPIO connections within
the device tree. However, using a GPIO binding still requires changes to
the gpio controller just to add an of_gpio structure. In most cases, the
gpio controller doesn't actually need any special support and the simple
OF gpio mapping function is more than sufficient. Additional, the current
scheme of using of_gpio_chip requires a convoluted scheme to maintain
1:1 mappings between of_gpio_chip and gpio_chip instances.

If the struct of_gpio_chip data members were moved into struct gpio_chip,
then it would simplify the processing of OF gpio bindings, and it would
make it trivial to use device tree OF connections on existing gpiolib
controller drivers.

This patch eliminates the of_gpio_chip structure and moves the relevant
fields into struct gpio_chip (conditional on CONFIG_OF_GPIO). This move
simplifies the existing code and prepares for adding automatic device tree
support to existing drivers.

Signed-off-by: Grant Likely <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Anton Vorontsov <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: David Brownell <[email protected]>
Cc: Bill Gatliff <[email protected]>
Cc: Dmitry Eremin-Solenikov <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Jean Delvare <[email protected]>

show more ...

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <[email protected]>
Guess-its-ok-by: Christoph Lameter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lee Schermerhorn <[email protected]>

show more ...