powerpc/32: fix ADB_CUDA kconfig warning

Fix a (randconfig) kconfig warning by correcting the select
statement:

WARNING: unmet direct dependencies detected for ADB_CUDA
Depends on [n]: MACINTOSH_

powerpc/32: fix ADB_CUDA kconfig warning

Fix a (randconfig) kconfig warning by correcting the select
statement:

WARNING: unmet direct dependencies detected for ADB_CUDA
Depends on [n]: MACINTOSH_DRIVERS [=n] && (ADB [=n] || PPC_PMAC [=y]) && !PPC_PMAC64 [=n]
Selected by [y]:
- PPC_PMAC [=y] && PPC_BOOK3S [=y] && CPU_BIG_ENDIAN [=y] && POWER_RESET [=y] && PPC32 [=y]

The PPC32 isn't needed because ADB depends on (PPC_PMAC && PPC32).

Fixes: a3ef2fef198c ("powerpc/32: Add dependencies of POWER_RESET for pmac32")
Signed-off-by: Randy Dunlap <[email protected]>
Tested: Randy Dunlap <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

powerpc/32: Add dependencies of POWER_RESET for pmac32

pmac32's power off depends on ADB_CUDA to work. Enable it when
POWER_RESET is set for convenience.

Suggested-by: Zhangjin Wu <[email protected]

powerpc/32: Add dependencies of POWER_RESET for pmac32

pmac32's power off depends on ADB_CUDA to work. Enable it when
POWER_RESET is set for convenience.

Suggested-by: Zhangjin Wu <[email protected]>
Signed-off-by: Yuan Tan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/0cca5d5afb6c4a1b78648e98339b4b7c9def46d5.1694685860.git.tanyuan@tinylab.org

show more ...

powerpc/64s: Make hash MMU support configurable

This adds Kconfig selection which allows 64s hash MMU support to be
disabled. It can be disabled if radix support is enabled, the minimum
supported CP

powerpc/64s: Make hash MMU support configurable

This adds Kconfig selection which allows 64s hash MMU support to be
disabled. It can be disabled if radix support is enabled, the minimum
supported CPU type is POWER9 (or higher), and KVM is not selected.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE

PPC_NATIVE now only controls the native HPT code, so rename it to be
more descriptive. Restrict it to Book3S only.

Signed-off-by: Nicholas Piggin <

powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE

PPC_NATIVE now only controls the native HPT code, so rename it to be
more descriptive. Restrict it to Book3S only.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc: Move the use of irq_domain_add_nomap() behind a config option

Only a handful of old PPC systems are still using the old 'nomap'
variant of the irqdomain library. Move the associated definit

powerpc: Move the use of irq_domain_add_nomap() behind a config option

Only a handful of old PPC systems are still using the old 'nomap'
variant of the irqdomain library. Move the associated definitions
behind a configuration option, which will allow us to make some
more radical changes.

Signed-off-by: Marc Zyngier <[email protected]>

show more ...

powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac

With the strict dma mask checking introduced with the switch to
the generic DMA direct code common wifi chips on 32-bit powerbooks
stopped working.

powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac

With the strict dma mask checking introduced with the switch to
the generic DMA direct code common wifi chips on 32-bit powerbooks
stopped working. Add a 30-bit ZONE_DMA to the 32-bit pmac builds
to allow them to reliably allocate dma coherent memory.

Fixes: 65a21b71f948 ("powerpc/dma: remove dma_nommu_dma_supported")
Reported-by: Aaro Koskinen <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Tested-by: Larry Finger <[email protected]>
Acked-by: Larry Finger <[email protected]>
Tested-by: Aaro Koskinen <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

PCI: consolidate PCI config entry in drivers/pci

There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of

PCI: consolidate PCI config entry in drivers/pci

There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Acked-by: Max Filippov <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Paul Burton <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc: Kconfig: remove BE-only platforms from LE kernel build

Currently, little endian is only supported on powernv and pseries,
however, Kconfigs still allow us to include other platforms in a LE

powerpc: Kconfig: remove BE-only platforms from LE kernel build

Currently, little endian is only supported on powernv and pseries,
however, Kconfigs still allow us to include other platforms in a LE
kernel, this may result in space wasting or even build error if some
BE-only platforms always assume they are built for a BE kernel. So just
modify the Kconfigs of BE-only platforms to remove them from being built
for a LE kernel.

For 32bit only platforms, nothing needs to be done, because
CPU_LITTLE_ENDIAN depends on PPC64. For 64bit supported platforms, add
CPU_BIG_ENDIAN to dependencies explicitly, so that these platforms will
be disabled for LE [Suggested-by: Cédric Le Goater <[email protected]>].

Signed-off-by: Boqun Feng <[email protected]>
Acked-by: Geoff Levand <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Remove CONFIG_POWER4

Although the name CONFIG_POWER4 suggests that it controls support for
power4 cpus, this symbol is actually misnamed.

It is a historical wart from the powermac code, wh

powerpc: Remove CONFIG_POWER4

Although the name CONFIG_POWER4 suggests that it controls support for
power4 cpus, this symbol is actually misnamed.

It is a historical wart from the powermac code, which used to support
building a 32-bit kernel for power4. CONFIG_POWER4 was used in that
context to guard code that was 64-bit only.

In the powermac code we can just use CONFIG_PPC64 instead, and in other
places it is a synonym for CONFIG_PPC_BOOK3S_64.

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc: Add kconfig for muxed smp ipi support

Compile the new smp ipi mux and demux code only if a platform
will make use of it. The new config is selected as required.

The new cause_ipi smp op i

powerpc: Add kconfig for muxed smp ipi support

Compile the new smp ipi mux and demux code only if a platform
will make use of it. The new config is selected as required.

The new cause_ipi smp op is only available conditionally to point out
configs where the select is required; this makes setting the op an
immediate fail instead of a deferred unresolved symbol at link.

This also creates a new config for power surge powermac upgrade support
that can be disabled in expert mode but is default on.

I also removed the depends / default y on CONFIG_XICS since it is selected
by PSERIES.

Signed-off-by: Milton Miller <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc/kconfig: Kill PPC_MULTIPLATFORM

CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't
really meaningful anymore. It was basically equivalent to PPC64 || 6xx.

This removes i

powerpc/kconfig: Kill PPC_MULTIPLATFORM

CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't
really meaningful anymore. It was basically equivalent to PPC64 || 6xx.

This removes it along with the following changes:

- 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely
on 6xx which is what they want anyway.

- A new symbol, PPC_BOOK3S, is defined that represent compliance with
the "Server" variant of the architecture. This is set when either 6xx
or PPC64 is set and open the door for future BOOK3E 64-bit.

- 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use
PPC64 && PPC_BOOK3S

- A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now
used to control the use of prom_init.c

Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

[POWERPC] disallow building powermac and tsi108 without PCI

The TSI108 code and the 32 bit powermac and chrp platforms
have dependency on PCI that is not easy or desirable to get rid
of.

The easies

[POWERPC] disallow building powermac and tsi108 without PCI

The TSI108 code and the 32 bit powermac and chrp platforms
have dependency on PCI that is not easy or desirable to get rid
of.

The easiest fix is to always select CONFIG_PCI if one of those
platforms is enabled.

Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQS

Rename MPIC_BROKEN_U3 to something a little more descriptive. Its
effect is to enable support for HT irqs behind the PCI-X/HT bridge on
U3/U4 (aka.

[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQS

Rename MPIC_BROKEN_U3 to something a little more descriptive. Its
effect is to enable support for HT irqs behind the PCI-X/HT bridge on
U3/U4 (aka. CPC9x5) parts.

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

[POWERPC] Split powermac platforms into their own Kconfig file

Cleaning up arch/powerpc/Kconfig platform support.

Signed-off-by: Kumar Gala <[email protected]>