powerpc: replace #include <asm/export.h> with #include <linux/export.h>

Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linu

powerpc: replace #include <asm/export.h> with #include <linux/export.h>

Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.

Replace #include <asm/export.h> with #include <linux/export.h>.

After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.

Signed-off-by: Masahiro Yamada <[email protected]>
[mpe: Fixup selftests that stub asm/export.h]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc/lib: optimise PPC32 memcmp

At the time being, memcmp() compares two chunks of memory
byte per byte.

This patch optimises the comparison by comparing word by word.

On the same way as commit

powerpc/lib: optimise PPC32 memcmp

At the time being, memcmp() compares two chunks of memory
byte per byte.

This patch optimises the comparison by comparing word by word.

On the same way as commit 15c2d45d17418 ("powerpc: Add 64bit
optimised memcmp"), this patch moves memcmp() into a dedicated
file named memcmp_32.S

A small benchmark performed on an 8xx comparing two chuncks
of 512 bytes performed 100000 times gives:

Before : 5852274 TB ticks
After: 1488638 TB ticks

This is almost 4 times faster

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/lib: optimise 32 bits __clear_user()

Rewrite clear_user() on the same principle as memset(0), making use
of dcbz to clear complete cache lines.

This code is a copy/paste of memset(), with s

powerpc/lib: optimise 32 bits __clear_user()

Rewrite clear_user() on the same principle as memset(0), making use
of dcbz to clear complete cache lines.

This code is a copy/paste of memset(), with some modifications
in order to retrieve remaining number of bytes to be cleared,
as it needs to be returned in case of error.

On the same way as done on PPC64 in commit 17968fbbd19f1
("powerpc: 64bit optimised __clear_user"), the patch moves
__clear_user() into a dedicated file string_32.S

On a MPC885, throughput is almost doubled:

Before:
~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 18.990779 seconds, 52.7MB/s

After:
~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 9.611468 seconds, 104.0MB/s

On a MPC8321, throughput is multiplied by 2.12:

Before:
root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 6.844352 seconds, 146.1MB/s

After:
root@vgoippro:~# dd if=/dev/zero of=/dev/null bs=1M count=1000
1048576000 bytes (1000.0MB) copied, 3.218854 seconds, 310.7MB/s

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/lib: Adjust .balign inside string functions for PPC32

commit 87a156fb18fe1 ("Align hot loops of some string functions")
degraded the performance of string functions by adding useless
nops

A

powerpc/lib: Adjust .balign inside string functions for PPC32

commit 87a156fb18fe1 ("Align hot loops of some string functions")
degraded the performance of string functions by adding useless
nops

A simple benchmark on an 8xx calling 100000x a memchr() that
matches the first byte runs in 41668 TB ticks before this patch
and in 35986 TB ticks after this patch. So this gives an
improvement of approx 10%

Another benchmark doing the same with a memchr() matching the 128th
byte runs in 1011365 TB ticks before this patch and 1005682 TB ticks
after this patch, so regardless on the number of loops, removing
those useless nops improves the test by 5683 TB ticks.

Fixes: 87a156fb18fe1 ("Align hot loops of some string functions")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: EX_TABLE macro for exception tables

This macro is taken from s390, and allows more flexibility in
changing exception table format.

mpe: Put it in ppc_asm.h and only define one version usin

powerpc: EX_TABLE macro for exception tables

This macro is taken from s390, and allows more flexibility in
changing exception table format.

mpe: Put it in ppc_asm.h and only define one version using
stringinfy_in_c(). Add some empty definitions and headers to keep the
selftests happy.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

ppc: move exports to definitions

Signed-off-by: Al Viro <[email protected]>

powerpc: Align hot loops of some string functions

Align the hot loops in our assembly implementation of strncpy(),
strncmp() and memchr().

Signed-off-by: Anton Blanchard <[email protected]>
Signed-of

powerpc: Align hot loops of some string functions

Align the hot loops in our assembly implementation of strncpy(),
strncmp() and memchr().

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Remove assembly versions of strcpy, strcat, strlen and strcmp

A number of our assembly implementations of string functions do not
align their hot loops. I was going to align them manually,

powerpc: Remove assembly versions of strcpy, strcat, strlen and strcmp

A number of our assembly implementations of string functions do not
align their hot loops. I was going to align them manually, but I
realised that they are are almost instruction for instruction
identical to what gcc produces, with the advantage that gcc does
align them.

In light of that, let's just remove the assembly versions.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Add 64bit optimised memcmp

I noticed ksm spending quite a lot of time in memcmp on a large
KVM box. The current memcmp loop is very unoptimised - byte at a
time compares with no loop unroll

powerpc: Add 64bit optimised memcmp

I noticed ksm spending quite a lot of time in memcmp on a large
KVM box. The current memcmp loop is very unoptimised - byte at a
time compares with no loop unrolling. We can do much much better.

Optimise the loop in a few ways:

- Unroll the byte at a time loop

- For large (at least 32 byte) comparisons that are also 8 byte
aligned, use an unrolled modulo scheduled loop using 8 byte
loads. This is similar to our glibc memcmp.

A simple microbenchmark testing 10000000 iterations of an 8192 byte
memcmp was used to measure the performance:

baseline: 29.93 s

modified: 1.70 s

Just over 17x faster.

v2: Incorporated some suggestions from Segher:

- Use andi. instead of rdlicl.

- Convert bdnzt eq, to bdnz. It's just duplicating the earlier compare
and was a relic from a previous version.

- Don't use cr5, we have plans to use that CR field for fast local
atomics.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: 64bit optimised __clear_user

I noticed __clear_user high up in a profile of one of my RAID stress
tests. The testcase was doing a dd from /dev/zero which ends up
calling __clear_user.

__cl

powerpc: 64bit optimised __clear_user

I noticed __clear_user high up in a profile of one of my RAID stress
tests. The testcase was doing a dd from /dev/zero which ends up
calling __clear_user.

__clear_user is basically a loop with a single 4 byte store which
is horribly slow. We can do much better by aligning the desination
and doing 32 bytes of 8 byte stores in a loop.

The following testcase was used to verify the patch:

http://ozlabs.org/~anton/junkcode/stress_clear_user.c

To show the improvement in performance I ran a dd from /dev/zero
to /dev/null on a POWER7 box:

Before:

# dd if=/dev/zero of=/dev/null bs=1M count=10000
10485760000 bytes (10 GB) copied, 3.72379 s, 2.8 GB/s

After:

# time dd if=/dev/zero of=/dev/null bs=1M count=10000
10485760000 bytes (10 GB) copied, 0.728318 s, 14.4 GB/s

Over 5x faster.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc: Use the new generic strncpy_from_user() and strnlen_user()

This is much the same as for SPARC except that we can do the find_zero()
function more efficiently using the count-leading-zeroes

powerpc: Use the new generic strncpy_from_user() and strnlen_user()

This is much the same as for SPARC except that we can do the find_zero()
function more efficiently using the count-leading-zeroes instructions.
Tested on 32-bit and 64-bit PowerPC.

Signed-off-by: Paul Mackerras <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

powerpc: Fix string library functions

The powerpc strncmp implementation does not correctly handle a zero
length, despite the claim in 0119536cd314ef95553604208c25bc35581f7f0a
(Add hand-coded assemb

powerpc: Fix string library functions

The powerpc strncmp implementation does not correctly handle a zero
length, despite the claim in 0119536cd314ef95553604208c25bc35581f7f0a
(Add hand-coded assembly strcmp).

Additionally, all the length arguments are size_t, not int, so use
PPC_LCMPI and eq instead of cmpwi and le throughout.

Signed-off-by: Andreas Schwab <[email protected]>
Acked-by: Paul Mackerras <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc: Fix handling of strncmp with zero len

Commit 0119536c, which added the assembly version of strncmp to
powerpc, mentions that it adds two instructions to the version from
boot/string.S to al

powerpc: Fix handling of strncmp with zero len

Commit 0119536c, which added the assembly version of strncmp to
powerpc, mentions that it adds two instructions to the version from
boot/string.S to allow it to handle len=0. Unfortunately, it doesn't
always return 0 when that is the case. The length is passed in r5, but
the return value is passed back in r3. In certain cases, this will
happen to work. Otherwise it will pass back the address of the first
string as the return value.

This patch lifts the len <= 0 handling code from memcpy to handle that
case.

Reported by: [email protected]
Signed-off-by: Jeff Mahoney <[email protected]>
CC: <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc: Use PPC_LONG and PPC_LONG_ALIGN in lib/string.S

Replace ifdef clutter with the PPC_LONG and PPC_LONG_ALIGN macros
for readability.

No change to the generated code.

Signed-off-by: Michael

powerpc: Use PPC_LONG and PPC_LONG_ALIGN in lib/string.S

Replace ifdef clutter with the PPC_LONG and PPC_LONG_ALIGN macros
for readability.

No change to the generated code.

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

[POWERPC] Add hand-coded assembly strcmp

We have an assembly version of strncmp for the bootwrapper, but not
for the kernel, so we end up using the C version in the kernel. This
takes the strncmp c

[POWERPC] Add hand-coded assembly strcmp

We have an assembly version of strncmp for the bootwrapper, but not
for the kernel, so we end up using the C version in the kernel. This
takes the strncmp code from the bootup and copies it to the kernel
proper, adding two instructions so it copes correctly with len==0.

Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

Remove obsolete #include <linux/config.h>

Signed-off-by: Jörn Engel <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>

powerpc: Use reg.h instead of processor.h when we just want reg names

Now that the register names and bit definitions are all in reg.h,
use that instead of processor.h in assembly code in a few plac

powerpc: Use reg.h instead of processor.h when we just want reg names

Now that the register names and bit definitions are all in reg.h,
use that instead of processor.h in assembly code in a few places.

Signed-off-by: Paul Mackerras <[email protected]>

show more ...

powerpc: Merge enough to start building in arch/powerpc.

This creates the directory structure under arch/powerpc and a bunch
of Kconfig files. It does a first-cut merge of arch/powerpc/mm,
arch/pow

powerpc: Merge enough to start building in arch/powerpc.

This creates the directory structure under arch/powerpc and a bunch
of Kconfig files. It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged. That's going to be interesting.

Signed-off-by: Paul Mackerras <[email protected]>

show more ...