kvm: move "select IRQ_BYPASS_MANAGER" to common code

CONFIG_IRQ_BYPASS_MANAGER is a dependency of the common code included by
CONFIG_HAVE_KVM_IRQ_BYPASS. There is no advantage in adding the corresp

kvm: move "select IRQ_BYPASS_MANAGER" to common code

CONFIG_IRQ_BYPASS_MANAGER is a dependency of the common code included by
CONFIG_HAVE_KVM_IRQ_BYPASS. There is no advantage in adding the corresponding
"select" directive to each architecture.

Signed-off-by: Paolo Bonzini <[email protected]>

show more ...

KVM: introduce CONFIG_KVM_COMMON

CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. How

KVM: introduce CONFIG_KVM_COMMON

CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.

These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".

Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.

Fixes: 8132d887a702 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>

show more ...

KVM: remove CONFIG_HAVE_KVM_IRQFD

All platforms with a kernel irqchip have support for irqfd. Unify the
two configuration items so that userspace can expect to use irqfd to
inject interrupts into t

KVM: remove CONFIG_HAVE_KVM_IRQFD

All platforms with a kernel irqchip have support for irqfd. Unify the
two configuration items so that userspace can expect to use irqfd to
inject interrupts into the irqchip.

Signed-off-by: Paolo Bonzini <[email protected]>

show more ...

KVM: remove CONFIG_HAVE_KVM_EVENTFD

virt/kvm/eventfd.c is compiled unconditionally, meaning that the ioeventfds
member of struct kvm is accessed unconditionally. CONFIG_HAVE_KVM_EVENTFD
therefore m

KVM: remove CONFIG_HAVE_KVM_EVENTFD

virt/kvm/eventfd.c is compiled unconditionally, meaning that the ioeventfds
member of struct kvm is accessed unconditionally. CONFIG_HAVE_KVM_EVENTFD
therefore must be defined for KVM common code to compile successfully,
remove it.

Signed-off-by: Paolo Bonzini <[email protected]>

show more ...

KVM: Convert KVM_ARCH_WANT_MMU_NOTIFIER to CONFIG_KVM_GENERIC_MMU_NOTIFIER

Convert KVM_ARCH_WANT_MMU_NOTIFIER into a Kconfig and select it where
appropriate to effectively maintain existing behavior

KVM: Convert KVM_ARCH_WANT_MMU_NOTIFIER to CONFIG_KVM_GENERIC_MMU_NOTIFIER

Convert KVM_ARCH_WANT_MMU_NOTIFIER into a Kconfig and select it where
appropriate to effectively maintain existing behavior. Using a proper
Kconfig will simplify building more functionality on top of KVM's
mmu_notifier infrastructure.

Add a forward declaration of kvm_gfn_range to kvm_types.h so that
including arch/powerpc/include/asm/kvm_ppc.h's with CONFIG_KVM=n doesn't
generate warnings due to kvm_gfn_range being undeclared. PPC defines
hooks for PR vs. HV without guarding them via #ifdeffery, e.g.

bool (*unmap_gfn_range)(struct kvm *kvm, struct kvm_gfn_range *range);
bool (*age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range);
bool (*test_age_gfn)(struct kvm *kvm, struct kvm_gfn_range *range);
bool (*set_spte_gfn)(struct kvm *kvm, struct kvm_gfn_range *range);

Alternatively, PPC could forward declare kvm_gfn_range, but there's no
good reason not to define it in common KVM.

Acked-by: Anup Patel <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Reviewed-by: Fuad Tabba <[email protected]>
Tested-by: Fuad Tabba <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>

show more ...

kvm: Remove "select SRCU"

Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements from the

kvm: Remove "select SRCU"

Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements from the various KVM Kconfig files.

Acked-by: Sean Christopherson <[email protected]> (x86)
Signed-off-by: Paul E. McKenney <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Aleksandar Markovic <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: <[email protected]>
Acked-by: Marc Zyngier <[email protected]> (arm64)
Acked-by: Michael Ellerman <[email protected]> (powerpc)
Acked-by: Anup Patel <[email protected]> (riscv)
Acked-by: Heiko Carstens <[email protected]> (s390)
Reviewed-by: John Ogness <[email protected]>
Signed-off-by: Joel Fernandes (Google) <[email protected]>

show more ...

KVM: PPC: BookS PR-KVM and BookE do not support context tracking

The context tracking code in PR-KVM and BookE implementations is not
complete, and can cause host crashes if context tracking is enab

KVM: PPC: BookS PR-KVM and BookE do not support context tracking

The context tracking code in PR-KVM and BookE implementations is not
complete, and can cause host crashes if context tracking is enabled.

Make these implementations depend on !CONTEXT_TRACKING_USER.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc: Change CONFIG_E500 to CONFIG_PPC_E500

It will be used outside arch/powerpc, make it clear its a
powerpc configuration item.

And we already have CONFIG_PPC_E500MC, so that will make
it more

powerpc: Change CONFIG_E500 to CONFIG_PPC_E500

It will be used outside arch/powerpc, make it clear its a
powerpc configuration item.

And we already have CONFIG_PPC_E500MC, so that will make
it more consistent.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/e63b22083c11c4300f4a82d3123a46e5fdd54fa6.1663606876.git.christophe.leroy@csgroup.eu

show more ...

KVM: PPC: Kconfig: Fix indentation

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

S

KVM: PPC: Kconfig: Fix indentation

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

KVM: PPC: Book3S HV: Provide more detailed timings for P9 entry path

Alter the data collection points for the debug timing code in the P9
path to be more in line with what the code does. The points

KVM: PPC: Book3S HV: Provide more detailed timings for P9 entry path

Alter the data collection points for the debug timing code in the P9
path to be more in line with what the code does. The points where we
accumulate time are now the following:

vcpu_entry: From vcpu_run_hv entry until the start of the inner loop;

guest_entry: From the start of the inner loop until the guest entry in
asm;

in_guest: From the guest entry in asm until the return to KVM C code;

guest_exit: From the return into KVM C code until the corresponding
hypercall/page fault handling or re-entry into the guest;

hypercall: Time spent handling hcalls in the kernel (hcalls can go to
QEMU, not accounted here);

page_fault: Time spent handling page faults;

vcpu_exit: vcpu_run_hv exit (almost no code here currently).

Like before, these are exposed in debugfs in a file called
"timings". There are four values:

- number of occurrences of the accumulation point;
- total time the vcpu spent in the phase in ns;
- shortest time the vcpu spent in the phase in ns;
- longest time the vcpu spent in the phase in ns;

===
Before:

rm_entry: 53132 16793518 256 4060
rm_intr: 53132 2125914 22 340
rm_exit: 53132 24108344 374 2180
guest: 53132 40980507996 404 9997650
cede: 0 0 0 0

After:

vcpu_entry: 34637 7716108 178 4416
guest_entry: 52414 49365608 324 747542
in_guest: 52411 40828715840 258 9997480
guest_exit: 52410 19681717182 826 102496674
vcpu_exit: 34636 1744462 38 182
hypercall: 45712 22878288 38 1307962
page_fault: 992 111104034 568 168688

With just one instruction (hcall):

vcpu_entry: 1 942 942 942
guest_entry: 1 4044 4044 4044
in_guest: 1 1540 1540 1540
guest_exit: 1 3542 3542 3542
vcpu_exit: 1 80 80 80
hypercall: 0 0 0 0
page_fault: 0 0 0 0
===

Signed-off-by: Fabiano Rosas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

KVM: PPC: Book3S HV: Decouple the debug timing from the P8 entry path

We are currently doing the timing for debug purposes of the P9 entry
path using the accumulators and terminology defined by the

KVM: PPC: Book3S HV: Decouple the debug timing from the P8 entry path

We are currently doing the timing for debug purposes of the P9 entry
path using the accumulators and terminology defined by the old entry
path for P8 machines.

Not only the "real-mode" and "napping" mentions are out of place for
the P9 Radix entry path but also we cannot change them because the
timing code is coupled to the structures defined in struct
kvm_vcpu_arch.

Add a new CONFIG_KVM_BOOK3S_HV_P9_TIMING to enable the timing code for
the P9 entry path. For now, just add the new CONFIG and duplicate the
structures. A subsequent patch will add the P9 changes.

Signed-off-by: Fabiano Rosas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

KVM: PPC: Book3S HV: Add a new config for P8 debug timing

Turn the existing Kconfig KVM_BOOK3S_HV_EXIT_TIMING into
KVM_BOOK3S_HV_P8_TIMING in preparation for the addition of a new
config for P9 timi

KVM: PPC: Book3S HV: Add a new config for P8 debug timing

Turn the existing Kconfig KVM_BOOK3S_HV_EXIT_TIMING into
KVM_BOOK3S_HV_P8_TIMING in preparation for the addition of a new
config for P9 timings.

This applies only to P8 code, the generic timing code is still kept
under KVM_BOOK3S_HV_EXIT_TIMING.

Signed-off-by: Fabiano Rosas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled

PR KVM does not support running with AIL enabled, and SCV does is not
supported with AIL disabled. Fix this by ensuring the SCV facility i

KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled

PR KVM does not support running with AIL enabled, and SCV does is not
supported with AIL disabled. Fix this by ensuring the SCV facility is
disabled with FSCR while a CPU could be running with AIL=0.

The PowerNV host supports disabling AIL on a per-CPU basis, so SCV just
needs to be disabled when a vCPU is being run.

The pSeries machine can only switch AIL on a system-wide basis, so it
must disable SCV support at boot if the configuration can potentially
run a PR KVM guest.

Also ensure a the FSCR[SCV] bit can not be enabled when emulating
mtFSCR for the guest.

SCV is not emulated for the PR guest at the moment, this just fixes the
host crashes.

Alternatives considered and rejected:
- SCV support can not be disabled by PR KVM after boot, because it is
advertised to userspace with HWCAP.
- AIL can not be disabled on a per-CPU basis. At least when running on
pseries it is a per-LPAR setting.
- Support for real-mode SCV vectors will not be added because they are
at 0x17000 so making such a large fixed head space causes immediate
value limits to be exceeded, requiring a lot rework and more code.
- Disabling SCV for any PR KVM possible kernel will cause a slowdown
when not using PR KVM.
- A boot time option to disable SCV to use PR KVM is user-hostile.
- System call instruction emulation for SCV facility unavailable
instructions is too complex and old emulation code was subtly broken
and removed.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Fabiano Rosas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/64s: Make hash MMU support configurable

This adds Kconfig selection which allows 64s hash MMU support to be
disabled. It can be disabled if radix support is enabled, the minimum
supported CP

powerpc/64s: Make hash MMU support configurable

This adds Kconfig selection which allows 64s hash MMU support to be
disabled. It can be disabled if radix support is enabled, the minimum
supported CPU type is POWER9 (or higher), and KVM is not selected.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

KVM: Use interval tree to do fast hva lookup in memslots

The current memslots implementation only allows quick binary search by gfn,
quick lookup by hva is not possible - the implementation has to d

KVM: Use interval tree to do fast hva lookup in memslots

The current memslots implementation only allows quick binary search by gfn,
quick lookup by hva is not possible - the implementation has to do a linear
scan of the whole memslots array, even though the operation being performed
might apply just to a single memslot.

This significantly hurts performance of per-hva operations with higher
memslot counts.

Since hva ranges can overlap between memslots an interval tree is needed
for tracking them.

[sean: handle interval tree updates in kvm_replace_memslot()]
Signed-off-by: Maciej S. Szmigiero <[email protected]>
Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>

show more ...

KVM: PPC: Book3S HV: Don't always save PMU for guest capable of nesting

Provide a config option that controls the workaround added by commit
63279eeb7f93 ("KVM: PPC: Book3S HV: Always save guest pmu

KVM: PPC: Book3S HV: Don't always save PMU for guest capable of nesting

Provide a config option that controls the workaround added by commit
63279eeb7f93 ("KVM: PPC: Book3S HV: Always save guest pmu for guest
capable of nesting"). The option defaults to y for now, but is expected
to go away within a few releases.

Nested capable guests running with the earlier commit 178266389794
("KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest
SPRs are live") will now indicate the PMU in-use status of their guests,
which means the parent does not need to unconditionally save the PMU for
nested capable guests.

After this latest round of performance optimisations, this option costs
about 540 cycles or 10% entry/exit performance on a POWER9 nested-capable
guest.

Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Fabiano Rosas <[email protected]>
References: 178266389794 ("KVM: PPC: Book3S HV Nested: Reflect guest PMU in-use to L0 when guest SPRs are live")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/kvm: Remove obsolete and unneeded select

Commit a278e7ea608b ("powerpc: Fix compile issue with force DAWR")
selects the non-existing config PPC_DAWR_FORCE_ENABLE for config
KVM_BOOK3S_64_HAN

powerpc/kvm: Remove obsolete and unneeded select

Commit a278e7ea608b ("powerpc: Fix compile issue with force DAWR")
selects the non-existing config PPC_DAWR_FORCE_ENABLE for config
KVM_BOOK3S_64_HANDLER. As this commit also introduces a config PPC_DAWR
and this config PPC_DAWR is selected with PPC if PPC64, there is no
need for any further select in the KVM_BOOK3S_64_HANDLER.

Remove an obsolete and unneeded select in config KVM_BOOK3S_64_HANDLER.

The issue was identified with ./scripts/checkkconfigsymbols.py.

Fixes: a278e7ea608b ("powerpc: Fix compile issue with force DAWR")
Signed-off-by: Lukas Bulwahn <[email protected]>
Reviewed-by: Daniel Axtens <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/kvm: Force selection of CONFIG_PPC_FPU

book3s/32 kvm is designed with the assumption that
an FPU is always present.

Force selection of FPU support in the kernel when
build KVM.

Fixes: 7d68

powerpc/kvm: Force selection of CONFIG_PPC_FPU

book3s/32 kvm is designed with the assumption that
an FPU is always present.

Force selection of FPU support in the kernel when
build KVM.

Fixes: 7d68c8916950 ("powerpc/32s: Allow deselecting CONFIG_PPC_FPU on mpc832x")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/74461a99fa1466f361532ca794ca0753be3d9f86.1611038044.git.christophe.leroy@csgroup.eu

show more ...

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasi

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

vhost: refine vhost and vringh kconfig

Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is
not necessarily for VM since it's a generic userspace and kernel
communication protocol.

vhost: refine vhost and vringh kconfig

Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is
not necessarily for VM since it's a generic userspace and kernel
communication protocol. Such dependency may prevent archs without
virtualization support from using vhost.

To solve this, a dedicated vhost menu is created under drivers so
CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION.

While at it, also squash Kconfig.vringh into vhost Kconfig file. This
avoids the trick of conditional inclusion from VOP or CAIF. Then it
will be easier to introduce new vringh users and common dependency for
both vringh and vhost.

Signed-off-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>

show more ...

powerpc/Kconfig: Clean up formatting

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Also convert "---help---" as requested.

Si

powerpc/Kconfig: Clean up formatting

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Also convert "---help---" as requested.

Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Fix compile issue with force DAWR

If you compile with KVM but without CONFIG_HAVE_HW_BREAKPOINT you fail
at linking with:
arch/powerpc/kvm/book3s_hv_rmhandlers.o:(.text+0x708): undefined

powerpc: Fix compile issue with force DAWR

If you compile with KVM but without CONFIG_HAVE_HW_BREAKPOINT you fail
at linking with:
arch/powerpc/kvm/book3s_hv_rmhandlers.o:(.text+0x708): undefined reference to `dawr_force_enable'

This was caused by commit c1fe190c0672 ("powerpc: Add force enable of
DAWR on P9 option").

This moves a bunch of code around to fix this. It moves a lot of the
DAWR code in a new file and creates a new CONFIG_PPC_DAWR to enable
compiling it.

Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Neuling <[email protected]>
[mpe: Minor formatting in set_dawr()]
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

Make anon_inodes unconditional

Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.

Signed-off-by: David Howells <[email protected]>
Signed-off-by:

Make anon_inodes unconditional

Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.

Signed-off-by: David Howells <[email protected]>
Signed-off-by: Al Viro <[email protected]>
[[email protected]: adapt commit message to mention pidfds]
Signed-off-by: Christian Brauner <[email protected]>

show more ...

Make anon_inodes unconditional

Make the anon_inodes facility unconditional so that it can be used by core
VFS code.

Signed-off-by: David Howells <[email protected]>
Signed-off-by: Al Viro <viro@z

Make anon_inodes unconditional

Make the anon_inodes facility unconditional so that it can be used by core
VFS code.

Signed-off-by: David Howells <[email protected]>
Signed-off-by: Al Viro <[email protected]>

show more ...

treewide: surround Kconfig file paths with double quotes

The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
suppor

treewide: surround Kconfig file paths with double quotes

The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.

I do not see a good reason to complicate Kconfig for the room of
ambiguity.

The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.

Make it treewide consistent now.

Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Ingo Molnar <[email protected]>

show more ...