powerpc: Don't clobber f0/vs0 during fp|altivec register save

During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
le

powerpc: Don't clobber f0/vs0 during fp|altivec register save

During floating point and vector save to thread data f0/vs0 are
clobbered by the FPSCR/VSCR store routine. This has been obvserved to
lead to userspace register corruption and application data corruption
with io-uring.

Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for
all the FP, altivec, VMX register save paths.

Tested under QEMU in kvm mode, running on a Talos II workstation with
dual POWER9 DD2.2 CPUs.

Additional detail (mpe):

Typically save_fpu() is called from __giveup_fpu() which saves the FP
regs and also *turns off FP* in the tasks MSR, meaning the kernel will
reload the FP regs from the thread struct before letting the task use FP
again. So in that case save_fpu() is free to clobber f0 because the FP
regs no longer hold live values for the task.

There is another case though, which is the path via:
sys_clone()
...
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()

That path saves the FP regs but leaves them live. That's meant as an
optimisation for a process that's using FP/VSX and then calls fork(),
leaving the regs live means the parent process doesn't have to take a
fault after the fork to get its FP regs back. The optimisation was added
in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without
giving it up").

That path does clobber f0, but f0 is volatile across function calls,
and typically programs reach copy_process() from userspace via a syscall
wrapper function. So in normal usage f0 being clobbered across a
syscall doesn't cause visible data corruption.

But there is now a new path, because io-uring can call copy_process()
via create_io_thread() from the signal handling path. That's OK if the
signal is handled as part of syscall return, but it's not OK if the
signal is handled due to some other interrupt.

That path is:

interrupt_return_srr_user()
interrupt_exit_user_prepare()
interrupt_exit_user_prepare_main()
do_notify_resume()
get_signal()
task_work_run()
create_worker_cb()
create_io_worker()
copy_process()
dup_task_struct()
arch_dup_task_struct()
flush_all_to_thread()
save_all()
if (tsk->thread.regs->msr & MSR_FP)
save_fpu()
# f0 is clobbered and potentially live in userspace

Note the above discussion applies equally to save_altivec().

Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up")
Cc: [email protected] # v4.6+
Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/
Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/
Tested-by: Timothy Pearson <[email protected]>
Tested-by: Jens Axboe <[email protected]>
Signed-off-by: Timothy Pearson <[email protected]>
[mpe: Reword change log to describe exact path of corruption & other minor tweaks]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com

show more ...

powerpc: replace #include <asm/export.h> with #include <linux/export.h>

Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linu

powerpc: replace #include <asm/export.h> with #include <linux/export.h>

Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.

Replace #include <asm/export.h> with #include <linux/export.h>.

After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.

Signed-off-by: Masahiro Yamada <[email protected]>
[mpe: Fixup selftests that stub asm/export.h]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

powerpc/64: vmlinux support building with PCREL addresing

PC-Relative or PCREL addressing is an extension to the ELF ABI which
uses Power ISA v3.1 PC-relative instructions to calculate addresses,
ra

powerpc/64: vmlinux support building with PCREL addresing

PC-Relative or PCREL addressing is an extension to the ELF ABI which
uses Power ISA v3.1 PC-relative instructions to calculate addresses,
rather than the traditional TOC scheme.

Add an option to build vmlinux using pcrel addressing. Modules continue
to use TOC addressing.

- TOC address helpers and r2 are poisoned with -1 when running vmlinux.
r2 could be used for something useful once things are ironed out.

- Assembly must call C functions with @notoc annotation, or the linker
complains aobut a missing nop after the call. This is done with the
CFUNC macro introduced earlier.

- Boot: with the exception of prom_init, the execution branches to the
kernel virtual address early in boot, before any addresses are
generated, which ensures 34-bit pcrel addressing does not miss the
high PAGE_OFFSET bits. TOC relative addressing has a similar
requirement. prom_init does not go to the virtual address and its
addresses should not carry over to the post-prom kernel.

- Ftrace trampolines are converted from TOC addressing to pcrel
addressing, including module ftrace trampolines that currently use the
kernel TOC to find ftrace target functions.

- BPF function prologue and function calling generation are converted
from TOC to pcrel.

- copypage_64.S has an interesting problem, prefixed instructions have
alignment restrictions so the linker can add padding, which makes the
assembler treat the difference between two local labels as
non-constant even if alignment is arranged so padding is not required.
This may need toolchain help to solve nicely, for now move the prefix
instruction out of the alternate patch section to work around it.

This reduces kernel text size by about 6%.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

powerpc: Fix objtool unannotated intra-function call warnings

Objtool throws unannotated intra-function call warnings in the following
assembly files:

arch/powerpc/kernel/vector.o: warning: objtool

powerpc: Fix objtool unannotated intra-function call warnings

Objtool throws unannotated intra-function call warnings in the following
assembly files:

arch/powerpc/kernel/vector.o: warning: objtool: .text+0x53c: unannotated intra-function call

arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0x60: unannotated intra-function call
arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0x124: unannotated intra-function call
arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0x5d4: unannotated intra-function call
arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0x5dc: unannotated intra-function call
arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0xcb8: unannotated intra-function call
arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0xd0c: unannotated intra-function call
arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0x1030: unannotated intra-function call

arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x358: unannotated intra-function call
arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x728: unannotated intra-function call
arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x4d94: unannotated intra-function call
arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x4ec4: unannotated intra-function call

arch/powerpc/kvm/book3s_hv_interrupts.o: warning: objtool: .text+0x6c: unannotated intra-function call
arch/powerpc/kernel/misc_64.o: warning: objtool: .text+0x64: unannotated intra-function call

Objtool does not add STT_NOTYPE symbols with size 0 to the rbtree, which
is why find_call_destination() function is not able to find the
destination symbol for 'bl' instruction. For such symbols, objtool is
throwing unannotated intra-function call warnings in assembly files. Fix
these warnings by annotating those symbols with SYM_FUNC_START_LOCAL and
SYM_FUNC_END macros, inorder to set symbol type to STT_FUNC and symbol
size accordingly.

Tested-by: Naveen N. Rao <[email protected]>
Reviewed-by: Naveen N. Rao <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Sathvika Vasireddy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/64: asm use consistent global variable declaration and access

Use helper macros to access global variables, and place them in .data
sections rather than in .toc. Putting addresses in TOC is

powerpc/64: asm use consistent global variable declaration and access

Use helper macros to access global variables, and place them in .data
sections rather than in .toc. Putting addresses in TOC is not required
because the kernel is linked with a single TOC.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/64s/interrupt: handle MSR EE and RI in interrupt entry wrapper

The mtmsrd to enable MSR[RI] can be combined with the mtmsrd to enable
MSR[EE] in interrupt entry code, for those interrupts wh

powerpc/64s/interrupt: handle MSR EE and RI in interrupt entry wrapper

The mtmsrd to enable MSR[RI] can be combined with the mtmsrd to enable
MSR[EE] in interrupt entry code, for those interrupts which enable EE.
This helps performance of important synchronous interrupts (e.g., page
faults).

This is similar to what commit dd152f70bdc1 ("powerpc/64s: system call
avoid setting MSR[RI] until we set MSR[EE]") does for system calls.

Do this by enabling EE and RI together at the beginning of the entry
wrapper if PACA_IRQ_HARD_DIS is clear, and only enabling RI if it is
set.

Asynchronous interrupts set PACA_IRQ_HARD_DIS, but synchronous ones
leave it unchanged, so by default they always get EE=1 unless they have
interrupted a caller that is hard disabled. When the sync interrupt
later calls interrupt_cond_local_irq_enable(), it will not require
another mtmsrd because MSR[EE] was already enabled here.

This avoids one mtmsrd L=1 for synchronous interrupts on 64s, which
saves about 20 cycles on POWER9. And for kernel-mode interrupts, both
synchronous and asynchronous, this saves an additional 40 cycles due to
the mtmsrd being moved ahead of mfspr SPRN_AMR, which prevents a SPR
scoreboard stall.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/32: Remove unneccessary calculations in load_up_{fpu/altivec}

No need to re-read SPRN_THREAD, we can calculate thread address
from current (r2).

And remove a reload of value 1 into r4 as r4

powerpc/32: Remove unneccessary calculations in load_up_{fpu/altivec}

No need to re-read SPRN_THREAD, we can calculate thread address
from current (r2).

And remove a reload of value 1 into r4 as r4 is already 1.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/c04cce578b97a76a9e69a096698b1d89f721768a.1629276437.git.christophe.leroy@csgroup.eu

show more ...

powerpc/64s: avoid reloading (H)SRR registers if they are still valid

When an interrupt is taken, the SRR registers are set to return to where
it left off. Unless they are modified in the meantime,

powerpc/64s: avoid reloading (H)SRR registers if they are still valid

When an interrupt is taken, the SRR registers are set to return to where
it left off. Unless they are modified in the meantime, or the return
address or MSR are modified, there is no need to reload these registers
when returning from interrupt.

Introduce per-CPU flags that track the validity of SRR and HSRR
registers. These are cleared when returning from interrupt, when
using the registers for something else (e.g., OPAL calls), when
adjusting the return address or MSR of a context, and when context
switching (which changes the return address and MSR).

This improves the performance of interrupt returns.

Signed-off-by: Nicholas Piggin <[email protected]>
[mpe: Fold in fixup patch from Nick]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/64s: introduce different functions to return from SRR vs HSRR interrupts

This makes no real difference yet except that HSRR type interrupts will
use hrfid to return. This is important for th

powerpc/64s: introduce different functions to return from SRR vs HSRR interrupts

This makes no real difference yet except that HSRR type interrupts will
use hrfid to return. This is important for the next patch.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/32: Always enable data translation in exception prolog

If the code can use a stack in vm area, it can also use a
stack in linear space.

Simplify code by removing old non VMAP stack code on

powerpc/32: Always enable data translation in exception prolog

If the code can use a stack in vm area, it can also use a
stack in linear space.

Simplify code by removing old non VMAP stack code on PPC32.

That means the data translation is now re-enabled early in
exception prolog in all cases, not only when using VMAP stacks.

While we are touching EXCEPTION_PROLOG macros, remove the
unused for_rtas parameter in EXCEPTION_PROLOG_1.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/7cd6440c60a7e8f4f035b245c57720f51e225aae.1615552866.git.christophe.leroy@csgroup.eu

show more ...

powerpc: re-initialise lazy FPU/VEC counters on every fault

When a FP/VEC/VSX unavailable fault loads registers and enables the
facility in the MSR, re-set the lazy restore counters to 1 rather
than

powerpc: re-initialise lazy FPU/VEC counters on every fault

When a FP/VEC/VSX unavailable fault loads registers and enables the
facility in the MSR, re-set the lazy restore counters to 1 rather
than incrementing them so every fault gets the same number of
restores before the next fault.

This probably shouldn't be a practical change because if a lazy counter
was non-zero then it should have been restored and would not cause a
fault when userspace tries to access it. However the code and comment
implies otherwise so that's misleading and unnecessary.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/32: Blacklist functions running with MMU disabled for kprobe

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.

Signed-off

powerpc/32: Blacklist functions running with MMU disabled for kprobe

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.

Signed-off-by: Christophe Leroy <[email protected]>
Acked-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/3bf57066d05518644dee0840af69d36ab5086729.1585670437.git.christophe.leroy@c-s.fr

show more ...

powerpc/64s: Implement interrupt exit logic in C

Implement the bulk of interrupt return logic in C. The asm return code
must handle a few cases: restoring full GPRs, and emulating stack
store.

The

powerpc/64s: Implement interrupt exit logic in C

Implement the bulk of interrupt return logic in C. The asm return code
must handle a few cases: restoring full GPRs, and emulating stack
store.

The stack store emulation is significantly simplfied, rather than
creating a new return frame and switching to that before performing
the store, it uses the PACA to keep a scratch register around to
perform the store.

The asm return code is moved into 64e for now. The new logic has made
allowance for 64e, but I don't have a full environment that works well
to test it, and even booting in emulated qemu is not great for stress
testing. 64e shouldn't be too far off working with this, given a bit
more testing and auditing of the logic.

This is slightly faster on a POWER9 (page fault speed increases about
1.1%), probably due to reduced mtmsrd.

mpe: Includes fixes from Nick for _TIF_EMULATE_STACK_STORE
handling (including the fast_interrupt_return path), to remove
trace_hardirqs_on(), and fixes the interrupt-return part of the
MSR_VSX restore bug caught by tm-unavailable selftest.

mpe: Incorporate fix from Nick:

The return-to-kernel path has to replay any soft-pending interrupts if
it is returning to a context that had interrupts soft-enabled. It has
to do this carefully and avoid plain enabling interrupts if this is an
irq context, which can cause multiple nesting of interrupts on the
stack, and other unexpected issues.

The code which avoided this case got the soft-mask state wrong, and
marked interrupts as enabled before going around again to retry. This
seems to be mostly harmless except when PREEMPT=y, this calls
preempt_schedule_irq with irqs apparently enabled and runs into a BUG
in kernel/sched/core.c

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michal Suchanek <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/32s: Enable CONFIG_VMAP_STACK

A few changes to retrieve DAR and DSISR from struct regs
instead of retrieving them directly, as they may have
changed due to a TLB miss.

Also modifies hash_pa

powerpc/32s: Enable CONFIG_VMAP_STACK

A few changes to retrieve DAR and DSISR from struct regs
instead of retrieving them directly, as they may have
changed due to a TLB miss.

Also modifies hash_page() and friends to work with virtual
data addresses instead of physical ones. Same on load_up_fpu()
and load_up_altivec().

Signed-off-by: Christophe Leroy <[email protected]>
[mpe: Fix tovirt_vmstack call in head_32.S to fix CHRP build]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/2e2509a242fd5f3e23df4a06530c18060c4d321e.1576916812.git.christophe.leroy@c-s.fr

show more ...

powerpc/64: Don't trace code that runs with the soft irq mask unreconciled

"Reconciling" in terms of interrupt handling, is to bring the soft irq
mask state in to synch with the hardware, after an i

powerpc/64: Don't trace code that runs with the soft irq mask unreconciled

"Reconciling" in terms of interrupt handling, is to bring the soft irq
mask state in to synch with the hardware, after an interrupt causes
MSR[EE] to be cleared (while the soft mask may be enabled, and hard
irqs not marked disabled).

General kernel code should not be called while unreconciled, because
local_irq_disable, etc. manipulations can cause surprising irq traces,
and it's fragile because the soft irq code does not really expect to
be called in this situation.

When exiting from an interrupt, MSR[EE] is cleared to prevent races,
but soft irq state is enabled for the returned-to context, so this is
now an unreconciled state. restore_math is called in this state, and
that can be ftraced, and the ftrace subsystem disables local irqs.

Mark restore_math and its callees as notrace. Restore a sanity check
in the soft irq code that had to be disabled for this case, by commit
4da1f79227ad4 ("powerpc/64: Disable irq restore warning for now").

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: move ASM_CONST and stringify_in_c() into asm-const.h

This patch moves ASM_CONST() and stringify_in_c() into
dedicated asm-const.h, then cleans all related inclusions.

Signed-off-by: Christ

powerpc: move ASM_CONST and stringify_in_c() into asm-const.h

This patch moves ASM_CONST() and stringify_in_c() into
dedicated asm-const.h, then cleans all related inclusions.

Signed-off-by: Christophe Leroy <[email protected]>
[mpe: asm-compat.h should include asm-const.h]
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc: Remove do_load_up_transact_{fpu,altivec}

Previous rework of TM code leaves these functions unused

Signed-off-by: Cyril Bur <[email protected]>
Signed-off-by: Michael Ellerman <mpe@ellerma

powerpc: Remove do_load_up_transact_{fpu,altivec}

Previous rework of TM code leaves these functions unused

Signed-off-by: Cyril Bur <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: tm: Rename transct_(*) to ck(\1)_state

Make the structures being used for checkpointed state named
consistently with the pt_regs/ckpt_regs.

Signed-off-by: Cyril Bur <[email protected]>
Si

powerpc: tm: Rename transct_(*) to ck(\1)_state

Make the structures being used for checkpointed state named
consistently with the pt_regs/ckpt_regs.

Signed-off-by: Cyril Bur <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

ppc: move exports to definitions

Signed-off-by: Al Viro <[email protected]>

powerpc: Improve comment explaining why we modify VRSAVE

The comment explaining why we modify VRSAVE is misleading, glibc
does rely on the behaviour. Update the comment.

Signed-off-by: Anton Blanch

powerpc: Improve comment explaining why we modify VRSAVE

The comment explaining why we modify VRSAVE is misleading, glibc
does rely on the behaviour. Update the comment.

Signed-off-by: Anton Blanchard <[email protected]>
Reviewed-by: Cyril Bur <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Add the ability to save VSX without giving it up

This patch adds the ability to be able to save the VSX registers to the
thread struct without giving up (disabling the facility) next time t

powerpc: Add the ability to save VSX without giving it up

This patch adds the ability to be able to save the VSX registers to the
thread struct without giving up (disabling the facility) next time the
process returns to userspace.

This patch builds on a previous optimisation for the FPU and VEC registers
in the thread copy path to avoid a possibly pointless reload of VSX state.

Signed-off-by: Cyril Bur <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Add the ability to save Altivec without giving it up

This patch adds the ability to be able to save the VEC registers to the
thread struct without giving up (disabling the facility) next ti

powerpc: Add the ability to save Altivec without giving it up

This patch adds the ability to be able to save the VEC registers to the
thread struct without giving up (disabling the facility) next time the
process returns to userspace.

This patch builds on a previous optimisation for the FPU registers in the
thread copy path to avoid a possibly pointless reload of VEC state.

Signed-off-by: Cyril Bur <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Restore FPU/VEC/VSX if previously used

Currently the FPU, VEC and VSX facilities are lazily loaded. This is not
a problem unless a process is using these facilities.

Modern versions of GCC

powerpc: Restore FPU/VEC/VSX if previously used

Currently the FPU, VEC and VSX facilities are lazily loaded. This is not
a problem unless a process is using these facilities.

Modern versions of GCC are very good at automatically vectorising code,
new and modernised workloads make use of floating point and vector
facilities, even the kernel makes use of vectorised memcpy.

All this combined greatly increases the cost of a syscall since the
kernel uses the facilities sometimes even in syscall fast-path making it
increasingly common for a thread to take an *_unavailable exception soon
after a syscall, not to mention potentially taking all three.

The obvious overcompensation to this problem is to simply always load
all the facilities on every exit to userspace. Loading up all FPU, VEC
and VSX registers every time can be expensive and if a workload does
avoid using them, it should not be forced to incur this penalty.

An 8bit counter is used to detect if the registers have been used in the
past and the registers are always loaded until the value wraps to back
to zero.

Several versions of the assembly in entry_64.S were tested:

1. Always calling C.
2. Performing a common case check and then calling C.
3. A complex check in asm.

After some benchmarking it was determined that avoiding C in the common
case is a performance benefit (option 2). The full check in asm (option
3) greatly complicated that codepath for a negligible performance gain
and the trade-off was deemed not worth it.

Signed-off-by: Cyril Bur <[email protected]>
[mpe: Move load_vec in the struct to fill an existing hole, reword change log]
Signed-off-by: Michael Ellerman <[email protected]>

fixup

show more ...

powerpc: Remove fp_enable() and vec_enable(), use msr_check_and_{set, clear}()

More consolidation of our MSR available bit handling.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by:

powerpc: Remove fp_enable() and vec_enable(), use msr_check_and_{set, clear}()

More consolidation of our MSR available bit handling.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...