powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc

>From a W=1 build:

>> arch/powerpc/kernel/rtas-proc.c:771: warning: Function parameter or member 'm' not described in
>> 'ppc_rtas_rmo_buf_show'

powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc

>From a W=1 build:

>> arch/powerpc/kernel/rtas-proc.c:771: warning: Function parameter or member 'm' not described in
>> 'ppc_rtas_rmo_buf_show'
>> arch/powerpc/kernel/rtas-proc.c:771: warning: Function parameter or member 'v' not described in
>> 'ppc_rtas_rmo_buf_show'

Add the missing parameter descriptions.

Signed-off-by: Nathan Lynch <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

powerpc/rtas: arch-wide function token lookup conversions

With the tokens for all implemented RTAS functions now available via
rtas_function_token(), which is optimal and safe for arbitrary
contexts

powerpc/rtas: arch-wide function token lookup conversions

With the tokens for all implemented RTAS functions now available via
rtas_function_token(), which is optimal and safe for arbitrary
contexts, there is no need to use rtas_token() or cache its result.

Most conversions are trivial, but a few are worth describing in more
detail:

* Error injection token comparisons for lockdown purposes are
consolidated into a simple predicate: token_is_restricted_errinjct().

* A couple of special cases in block_rtas_call() do not use
rtas_token() but perform string comparisons against names in the
function table. These are converted to compare against token values
instead, which is logically equivalent but less expensive.

* The lookup for the ibm,os-term token can be deferred until needed,
instead of caching it at boot to avoid device tree traversal during
panic.

* Since rtas_function_token() accesses a read-only data structure
without taking any locks, xmon's lookup of set-indicator can be
performed as needed instead of cached at startup.

Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc: Add missing headers

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for

powerpc: Add missing headers

Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...

Include the needed headers, and remove asm/prom.h when it was
needed exclusively for pulling necessary headers.

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu

show more ...

powerpc/rtas: Replaced simple_strtoull() with kstrtoull()

The simple_strtoull() function is deprecated in some situation, since
it does not check for the range overflow, use kstrtoull() instead.

Si

powerpc/rtas: Replaced simple_strtoull() with kstrtoull()

The simple_strtoull() function is deprecated in some situation, since
it does not check for the range overflow, use kstrtoull() instead.

Signed-off-by: Chen Huang <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/rtas: rename RTAS_RMOBUF_MAX to RTAS_USER_REGION_SIZE

RTAS_RMOBUF_MAX doesn't actually describe a "maximum" value in any
sense. It represents the size of an area of memory set aside for user

powerpc/rtas: rename RTAS_RMOBUF_MAX to RTAS_USER_REGION_SIZE

RTAS_RMOBUF_MAX doesn't actually describe a "maximum" value in any
sense. It represents the size of an area of memory set aside for user
space to use as work areas for certain RTAS calls.

Rename it to RTAS_USER_REGION_SIZE.

Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/rtas-proc: remove unused RMO_READ_BUF_MAX

This constant is unused.

Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Reviewed-by: Andrew

powerpc/rtas-proc: remove unused RMO_READ_BUF_MAX

This constant is unused.

Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Reviewed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

powerpc/rtas: improve ppc_rtas_rmo_buf_show documentation

Add kerneldoc for ppc_rtas_rmo_buf_show(), the callback for
/proc/powerpc/rtas/rmo_buffer, explaining its expected use.

Signed-off-by: Nath

powerpc/rtas: improve ppc_rtas_rmo_buf_show documentation

Add kerneldoc for ppc_rtas_rmo_buf_show(), the callback for
/proc/powerpc/rtas/rmo_buffer, explaining its expected use.

Signed-off-by: Nathan Lynch <[email protected]>
Reviewed-by: Alexey Kardashevskiy <[email protected]>
Reviewed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

proc: convert everything to "struct proc_ops"

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.

Conversion rule is:

llseek => proc_lseek
unlocked_ioctl => proc_ioctl

proc: convert everything to "struct proc_ops"

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.

Conversion rule is:

llseek => proc_lseek
unlocked_ioctl => proc_ioctl

xxx => proc_xxx

delete ".owner = THIS_MODULE" line

[[email protected]: fix drivers/isdn/capi/kcapi_proc.c]
[[email protected]: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

powerpc: rtas: clean up time handling

The to_tm() helper function operates on a signed integer for the time,
so it will suffer from overflow in 2038, even on 64-bit kernels.

Rather than fix that fu

powerpc: rtas: clean up time handling

The to_tm() helper function operates on a signed integer for the time,
so it will suffer from overflow in 2038, even on 64-bit kernels.

Rather than fix that function, this replaces its use in the rtas
procfs implementation with the standard rtc_time64_to_tm() helper
that is very similar but is not affected by the overflow.

In order to actually support long times, the parser function gets
changed to 64-bit user input and output as well. Note that the tm_mon
and tm_year representation is slightly different, so we have to manually
add an offset here.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc/rtas: Fix spelling mistake "Discharching" -> "Discharging"

Trivial fix to spelling mistake in battery_charging array.

Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by:

powerpc/rtas: Fix spelling mistake "Discharching" -> "Discharging"

Trivial fix to spelling mistake in battery_charging array.

Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

proc: introduce proc_create_single{,_data}

Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial calle

proc: introduce proc_create_single{,_data}

Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <[email protected]>

show more ...

powerpc: Use octal numbers for file permissions

Symbolic macros are unintuitive and hard to read, whereas octal constants
are much easier to interpret. Replace macros for the basic permission
flags

powerpc: Use octal numbers for file permissions

Symbolic macros are unintuitive and hard to read, whereas octal constants
are much easier to interpret. Replace macros for the basic permission
flags (user/group/other read/write/execute) with numeric constants
instead, across the whole powerpc tree.

Introducing a significant number of changes across the tree for no runtime
benefit isn't exactly desirable, but so long as these macros are still
used in the tree people will keep sending patches that add them. Not only
are they hard to parse at a glance, there are multiple ways of coming to
the same value (as you can see with 0444 and 0644 in this patch) which
hurts readability.

Signed-off-by: Russell Currey <[email protected]>
Reviewed-by: Cyril Bur <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PA

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

powerpc: Various typo fixes

Signed-off-by: Andrea Gelmini <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

powerpc: LLVM complains about forward declaration of struct rtas_sensors

Move the declaration up to silence the warning.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Michael Elle

powerpc: LLVM complains about forward declaration of struct rtas_sensors

Move the declaration up to silence the warning.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

show more ...

powerpc: Move /proc/ppc64 to /proc/powerpc update

It looks like the previous patch sent out to move RTAS and
other items from /proc/ppc64 to /proc/powerpc missed a few
files needed for RAS and DLPAR

powerpc: Move /proc/ppc64 to /proc/powerpc update

It looks like the previous patch sent out to move RTAS and
other items from /proc/ppc64 to /proc/powerpc missed a few
files needed for RAS and DLPAR functionality.

Original Patch here:
http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-September/076096.html

This patch updates the remaining files to be created under /proc/powerpc.

Signed-off-by: Nathan Fontenot <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

[POWERPC] Fix sparse warnings in arch/powerpc/kernel

Make a few things static in lparcfg.c
Make init and exit routines static in rtas_flash.c
Make things static in rtas_pci.c
Make some functions sta

[POWERPC] Fix sparse warnings in arch/powerpc/kernel

Make a few things static in lparcfg.c
Make init and exit routines static in rtas_flash.c
Make things static in rtas_pci.c
Make some functions static in rtas.c
Make fops static in rtas-proc.c
Remove unneeded extern for do_gtod in smp.c
Make clocksource_init() static in time.c
Make last_tick_len and ticklen_to_xs static in time.c
Move the declaration of the pvr per-cpu into smp.h
Make kexec_smp_down() and kexec_stack static in machine_kexec_64.c
Don't return void in arch_teardown_msi_irqs() in msi.c
Move declaration of GregorianDay()into asm/time.h

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

powerpc: use non-racy method for proc entries creation

Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Add correct ->owner to

powerpc: use non-racy method for proc entries creation

Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Add correct ->owner to proc_fops to fix reading/module unloading race.

Signed-off-by: Denis V. Lunev <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[POWERPC] Fix ppc_rtas_progress_show()

Fixes the warning

arch/powerpc/kernel/rtas-proc.c: In function 'ppc_rtas_progress_show':
arch/powerpc/kernel/rtas-proc.c:382: warning: the address of
'pro

[POWERPC] Fix ppc_rtas_progress_show()

Fixes the warning

arch/powerpc/kernel/rtas-proc.c: In function 'ppc_rtas_progress_show':
arch/powerpc/kernel/rtas-proc.c:382: warning: the address of
'progress_led' will always evaluate as 'true'

by fixing the code to do what it presumably is meant to do.

Signed-off-by: Segher Boessenkool <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

[POWERPC] Rename get_property to of_get_property: arch/powerpc

Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Paul

[POWERPC] Rename get_property to of_get_property: arch/powerpc

Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

[PATCH] mark struct file_operations const 2

Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potentia

[PATCH] mark struct file_operations const 2

Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.

[[email protected]: sparc64 fix]
Signed-off-by: Arjan van de Ven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[POWERPC] Constify & voidify get_property()

Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property

[POWERPC] Constify & voidify get_property()

Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

powerpc core changes.

Signed-off-by: Jeremy Kerr <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

[PATCH] powerpc: Avoid __initcall warnings

Fix __initcall return in proc_rtas_init and rtas_init.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

[PATCH] powerpc: Kill _machine and hard-coded platform numbers

This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism. With this,
bo

[PATCH] powerpc: Kill _machine and hard-coded platform numbers

This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism. With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants. This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...