powerpc/io: Use standard barrier macros in io.c

io.c uses open-coded barriers. Update it to use the equivalent but in
macro form.

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by:

powerpc/io: Use standard barrier macros in io.c

io.c uses open-coded barriers. Update it to use the equivalent but in
macro form.

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Link: https://patch.msgid.link/[email protected]

show more ...

powerpc/io: Rename _insw_ns() etc.

The "_ns" suffix was "historical" in 2006, finally remove it.

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Madhavan Srinivasan <maddy@linux

powerpc/io: Rename _insw_ns() etc.

The "_ns" suffix was "historical" in 2006, finally remove it.

Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Link: https://patch.msgid.link/[email protected]

show more ...

powerpc: Cast away __iomem in low level IO routines

Sparse reports dereferencing an __iomem pointer. These routines
are clearly low level handlers for IO memory, so force cast away
the __iomem annot

powerpc: Cast away __iomem in low level IO routines

Sparse reports dereferencing an __iomem pointer. These routines
are clearly low level handlers for IO memory, so force cast away
the __iomem annotation to tell sparse the dereferences are safe.

Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc/powernv: Add PIO accessors for Power8 LPC bus

This uses the hooks provided by CONFIG_PPC_INDIRECT_PIO to
implement a set of hooks for IO port access to use the LPC
bus via OPAL calls for the

powerpc/powernv: Add PIO accessors for Power8 LPC bus

This uses the hooks provided by CONFIG_PPC_INDIRECT_PIO to
implement a set of hooks for IO port access to use the LPC
bus via OPAL calls for the first 64K of IO space

Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc: various straight conversions from module.h --> export.h

All these files were including module.h just for the basic
EXPORT_SYMBOL infrastructure. We can shift them off to the
export.h heade

powerpc: various straight conversions from module.h --> export.h

All these files were including module.h just for the basic
EXPORT_SYMBOL infrastructure. We can shift them off to the
export.h header which is a way smaller footprint and thus
realize some compile time gains.

Signed-off-by: Paul Gortmaker <[email protected]>

show more ...

powerpc: tiny memcpy_(to|from)io optimisation

This trivial patch changes memcpy_(to|from)io as to transfer as many
32-bit words as possible in 32-bit accesses (in the current solution,
the last 32-b

powerpc: tiny memcpy_(to|from)io optimisation

This trivial patch changes memcpy_(to|from)io as to transfer as many
32-bit words as possible in 32-bit accesses (in the current solution,
the last 32-bit word was transferred as 4 byte accesses).

Signed-off-by: Albrecht Dreß <[email protected]>
Signed-off-by: Grant Likely <[email protected]>

show more ...

ftrace: support for PowerPC

This patch adds full support for ftrace for PowerPC (both 64 and 32 bit).
This includes dynamic tracing and function filtering.

Signed-off-by: Steven Rostedt <srostedt@r

ftrace: support for PowerPC

This patch adds full support for ftrace for PowerPC (both 64 and 32 bit).
This includes dynamic tracing and function filtering.

Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>

show more ...

[POWERPC] Move inline asm eieio to using eieio inline function

Use the eieio function so we can redefine what eieio does rather
than direct inline asm. This is part code clean up and partially
beca

[POWERPC] Move inline asm eieio to using eieio inline function

Use the eieio function so we can redefine what eieio does rather
than direct inline asm. This is part code clean up and partially
because not all PPCs have eieio (book-e has mbar that maps to eieio).

Signed-off-by: Kumar Gala <[email protected]>

show more ...

[POWERPC] Merge 32 and 64 bits asm-powerpc/io.h

powerpc: Merge 32 and 64 bits asm-powerpc/io.h

The rework on io.h done for the new hookable accessors made it easier,
so I just finished the work and

[POWERPC] Merge 32 and 64 bits asm-powerpc/io.h

powerpc: Merge 32 and 64 bits asm-powerpc/io.h

The rework on io.h done for the new hookable accessors made it easier,
so I just finished the work and merged 32 and 64 bits io.h for arch/powerpc.

arch/ppc still uses the old version in asm-ppc, there is just too much gunk
in there that I really can't be bothered trying to cleanup.

Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

[POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bits

This patch reworks the way iSeries hooks on PCI IO operations (both MMIO
and PIO) and provides a generic way for other platforms to do

[POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bits

This patch reworks the way iSeries hooks on PCI IO operations (both MMIO
and PIO) and provides a generic way for other platforms to do so (we
have need to do that for various other platforms).

While reworking the IO ops, I ended up doing some spring cleaning in
io.h and eeh.h which I might want to split into 2 or 3 patches (among
others, eeh.h had a lot of useless stuff in it).

A side effect is that EEH for PIO should work now (it used to pass IO
ports down to the eeh address check functions which is bogus).

Also, new are MMIO "repeat" ops, which other archs like ARM already had,
and that we have too now: readsb, readsw, readsl, writesb, writesw,
writesl.

In the long run, I might also make EEH use the hooks instead
of wrapping at the toplevel, which would make things even cleaner and
relegate EEH completely in platforms/iseries, but we have to measure the
performance impact there (though it's really only on MMIO reads)

Since I also need to hook on ioremap, I shuffled the functions a bit
there. I introduced ioremap_flags() to use by drivers who want to pass
explicit flags to ioremap (and it can be hooked). The old __ioremap() is
still there as a low level and cannot be hooked, thus drivers who use it
should migrate unless they know they want the low level version.

The patch "arch provides generic iomap missing accessors" (should be
number 4 in this series) is a pre-requisite to provide full iomap
API support with this patch.

Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

[POWERPC] Merge iSeries i/o operations with the rest

This patch changes the io operations so that they are out of line if
CONFIG_PPC_ISERIES is set and includes a firmware feature check in
that case

[POWERPC] Merge iSeries i/o operations with the rest

This patch changes the io operations so that they are out of line if
CONFIG_PPC_ISERIES is set and includes a firmware feature check in
that case.

Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

[POWERPC] convert string i/o operations to C

This produces essentially the same code and will make the iSeries i/o
consolidation easier.

The count parameter is changed to long since that will produ

[POWERPC] convert string i/o operations to C

This produces essentially the same code and will make the iSeries i/o
consolidation easier.

The count parameter is changed to long since that will produce the same
(better) code on 32 and 64 bit builds.

Signed-off-by: Stephen Rothwell <[email protected]>

show more ...