crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD

The following build warning has been reported:

arch/powerpc/crypto/ghashp8-ppc.o: warning: objtool: .text+0x22c: unannotated in

crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD

The following build warning has been reported:

arch/powerpc/crypto/ghashp8-ppc.o: warning: objtool: .text+0x22c: unannotated intra-function call

This happens due to commit bb7f054f4de2 ("objtool/powerpc: Add support
for decoding all types of uncond branches")

Disassembly of arch/powerpc/crypto/ghashp8-ppc.o shows:

arch/powerpc/crypto/ghashp8-ppc.o: file format elf64-powerpcle

Disassembly of section .text:

0000000000000140 <gcm_ghash_p8>:
140: f8 ff 00 3c lis r0,-8
...
20c: 20 00 80 4e blr
210: 00 00 00 00 .long 0x0
214: 00 0c 14 00 .long 0x140c00
218: 00 00 04 00 .long 0x40000
21c: 00 00 00 00 .long 0x0
220: 47 48 41 53 rlwimi. r1,r26,9,1,3
224: 48 20 66 6f xoris r6,r27,8264
228: 72 20 50 6f xoris r16,r26,8306
22c: 77 65 72 49 bla 1726574 <gcm_ghash_p8+0x1726434> <==
...

It corresponds to the following code in ghashp8-ppc.o :

_GLOBAL(gcm_ghash_p8)
lis 0,0xfff8
...
blr
.long 0
.byte 0,12,0x14,0,0,0,4,0
.long 0
.size gcm_ghash_p8,.-gcm_ghash_p8

.byte 71,72,65,83,72,32,102,111,114,32,80,111,119,101,114,73,83,65,32,50,46,48,55,44,32,67,82,89,80,84,79,71,65,77,83,32,98,121,32,60,97,112,112,114,111,64,111,112,101,110,115,115,108,46,111,114,103,62,0
.align 2
.align 2

In fact this is raw data that is after the function end and that is
not text so shouldn't be disassembled as text. But ghashp8-ppc.S is
generated by a perl script and should have been marked as
OBJECT_FILES_NON_STANDARD.

Now that 'bla' is understood as a call instruction, that raw data
is mis-interpreted as an infra-function call.

Mark ghashp8-ppc.o as a OBJECT_FILES_NON_STANDARD to avoid this
warning.

Reported-by: Venkat Rao Bagalkote <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]
Fixes: 109303336a0c ("crypto: vmx - Move to arch/powerpc/crypto")
Signed-off-by: Christophe Leroy <[email protected]>
Tested-By: Venkat Rao Bagalkote <[email protected]>
Reviewed-by: Sathvika Vasireddy <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Link: https://patch.msgid.link/7aa7eb73fe6bc95ac210510e22394ca0ae227b69.1741128786.git.christophe.leroy@csgroup.eu

show more ...

powerpc/crc: delete obsolete crc-vpmsum_test.c

Delete crc-vpmsum_test.c, since its functionality is now covered by the
new crc_kunit.c as well as the crypto subsystem's fuzz tests.

Reviewed-by: Ard

powerpc/crc: delete obsolete crc-vpmsum_test.c

Delete crc-vpmsum_test.c, since its functionality is now covered by the
new crc_kunit.c as well as the crypto subsystem's fuzz tests.

Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Cc: Vinicius Peixoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>

show more ...

powerpc/crc-t10dif: expose CRC-T10DIF function through lib

Move the powerpc CRC-T10DIF assembly code into the lib directory and
wire it up to the library interface. This allows it to be used withou

powerpc/crc-t10dif: expose CRC-T10DIF function through lib

Move the powerpc CRC-T10DIF assembly code into the lib directory and
wire it up to the library interface. This allows it to be used without
going through the crypto API. It remains usable via the crypto API too
via the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.

Note: to see the diff from arch/powerpc/crypto/crct10dif-vpmsum_glue.c
to arch/powerpc/lib/crc-t10dif-glue.c, view this commit with
'git show -M10'.

Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>

show more ...

powerpc/crc32: expose CRC32 functions through lib

Move the powerpc CRC32C assembly code into the lib directory and wire it
up to the library interface. This allows it to be used without going
throu

powerpc/crc32: expose CRC32 functions through lib

Move the powerpc CRC32C assembly code into the lib directory and wire it
up to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.

Note: to see the diff from arch/powerpc/crypto/crc32c-vpmsum_glue.c to
arch/powerpc/lib/crc32-glue.c, view this commit with 'git show -M10'.

Reviewed-by: Ard Biesheuvel <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>

show more ...

crypto: ppc/curve25519 - Update Kconfig and Makefile for ppc64le

Defined CRYPTO_CURVE25519_PPC64 to support X25519 for ppc64le.

Added new module curve25519-ppc64le for X25519.

Signed-off-by: Danny

crypto: ppc/curve25519 - Update Kconfig and Makefile for ppc64le

Defined CRYPTO_CURVE25519_PPC64 to support X25519 for ppc64le.

Added new module curve25519-ppc64le for X25519.

Signed-off-by: Danny Tsen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: vmx - Move to arch/powerpc/crypto

Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.

drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/a

crypto: vmx - Move to arch/powerpc/crypto

Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.

drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c

deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl

This patch has been tested has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.

Signed-off-by: Danny Tsen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: powerpc - Add chacha20/poly1305-p10 to Kconfig and Makefile

Defined CRYPTO_CHACHA20_P10 and CRYPTO POLY1305_P10 in Kconfig to
support optimized implementation for Power10 and later CPU.

Add

crypto: powerpc - Add chacha20/poly1305-p10 to Kconfig and Makefile

Defined CRYPTO_CHACHA20_P10 and CRYPTO POLY1305_P10 in Kconfig to
support optimized implementation for Power10 and later CPU.

Added new module driver chacha-p10-crypto and poly1305-p10-crypto.

Signed-off-by: Danny Tsen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

powerpc/crypto: Fix aes-gcm-p10 link errors

The recently added P10 AES/GCM code added some files containing
CRYPTOGAMS perl-asm code which are near duplicates of the p8 files
found in drivers/crypto

powerpc/crypto: Fix aes-gcm-p10 link errors

The recently added P10 AES/GCM code added some files containing
CRYPTOGAMS perl-asm code which are near duplicates of the p8 files
found in drivers/crypto/vmx.

In particular the newly added files produce functions with identical
names to the existing code.

When the kernel is built with CONFIG_CRYPTO_AES_GCM_P10=y and
CONFIG_CRYPTO_DEV_VMX_ENCRYPT=y that leads to link errors, eg:

ld: drivers/crypto/vmx/aesp8-ppc.o: in function `aes_p8_set_encrypt_key':
(.text+0xa0): multiple definition of `aes_p8_set_encrypt_key'; arch/powerpc/crypto/aesp8-ppc.o:(.text+0xa0): first defined here
...
ld: drivers/crypto/vmx/ghashp8-ppc.o: in function `gcm_ghash_p8':
(.text+0x140): multiple definition of `gcm_ghash_p8'; arch/powerpc/crypto/ghashp8-ppc.o:(.text+0x2e4): first defined here

Fix it for now by renaming the newly added files and functions to use
"p10" instead of "p8" in the names.

Fixes: 45a4672b9a6e ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Tested-by: Vishal Chourasia <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

crypto: p10-aes-gcm - Update Kconfig and Makefile

Defined CRYPTO_AES_GCM_P10 in Kconfig to support AES/GCM
stitched implementation for Power10 or later CPU.

Added a new module driver aes-gcm-p10-cr

crypto: p10-aes-gcm - Update Kconfig and Makefile

Defined CRYPTO_AES_GCM_P10 in Kconfig to support AES/GCM
stitched implementation for Power10 or later CPU.

Added a new module driver aes-gcm-p10-crypto.

Signed-off-by: Danny Tsen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: p10-aes-gcm - Revert implementation

Revert the changes that added p10-aes-gcm:

0781bbd7eaca ("crypto: p10-aes-gcm - A perl script to process PowerPC assembler source")
41a6437ab415 ("cryp

crypto: p10-aes-gcm - Revert implementation

Revert the changes that added p10-aes-gcm:

0781bbd7eaca ("crypto: p10-aes-gcm - A perl script to process PowerPC assembler source")
41a6437ab415 ("crypto: p10-aes-gcm - Supporting functions for ghash")
3b47eccaaff4 ("crypto: p10-aes-gcm - Supporting functions for AES")
ca68a96c37eb ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
cc40379b6e19 ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
3c657e8689ab ("crypto: p10-aes-gcm - Update Kconfig and Makefile")

These changes fail to build in many configurations and are not ready
for prime time.

Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: p10-aes-gcm - Update Kconfig and Makefile

Defined CRYPTO_P10_AES_GCM in Kconfig to support AES/GCM
stitched implementation for Power10+ CPU.

Added a new module driver p10-aes-gcm-crypto.

S

crypto: p10-aes-gcm - Update Kconfig and Makefile

Defined CRYPTO_P10_AES_GCM in Kconfig to support AES/GCM
stitched implementation for Power10+ CPU.

Added a new module driver p10-aes-gcm-crypto.

Signed-off-by: Danny Tsen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

crypto: powerpc - Stress test for vpmsum implementations

vpmsum implementations often don't kick in for short test vectors.
This is a simple test module that does a configurable number of
random tes

crypto: powerpc - Stress test for vpmsum implementations

vpmsum implementations often don't kick in for short test vectors.
This is a simple test module that does a configurable number of
random tests, each up to 64kB and each with random offsets.

Both CRC-T10DIF and CRC32C are tested.

Cc: Anton Blanchard <[email protected]>
Signed-off-by: Daniel Axtens <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: powerpc - Add CRC-T10DIF acceleration

T10DIF is a CRC16 used heavily in NVMe.

It turns out we can accelerate it with a CRC32 library and a few
little tricks.

Provide the accelerator based

crypto: powerpc - Add CRC-T10DIF acceleration

T10DIF is a CRC16 used heavily in NVMe.

It turns out we can accelerate it with a CRC32 library and a few
little tricks.

Provide the accelerator based the refactored CRC32 code.

Cc: Anton Blanchard <[email protected]>
Thanks-to: Hong Bo Peng <[email protected]>
Signed-off-by: Daniel Axtens <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: crc32c-vpmsum - Rename CRYPT_CRC32C_VPMSUM option

For consistency with the other 246 kernel configuration options,
rename CRYPT_CRC32C_VPMSUM to CRYPTO_CRC32C_VPMSUM.

Signed-off-by: Jean De

crypto: crc32c-vpmsum - Rename CRYPT_CRC32C_VPMSUM option

For consistency with the other 246 kernel configuration options,
rename CRYPT_CRC32C_VPMSUM to CRYPTO_CRC32C_VPMSUM.

Signed-off-by: Jean Delvare <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Herbert Xu <[email protected]>
Acked-by: Anton Blanchard <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: powerpc - Add POWER8 optimised crc32c

Use the vector polynomial multiply-sum instructions in POWER8 to
speed up crc32c.

This is just over 41x faster than the slice-by-8 method that it
repla

crypto: powerpc - Add POWER8 optimised crc32c

Use the vector polynomial multiply-sum instructions in POWER8 to
speed up crc32c.

This is just over 41x faster than the slice-by-8 method that it
replaces. Measurements on a 4.1 GHz POWER8 show it sustaining
52 GiB/sec.

A simple btrfs write performance test:

dd if=/dev/zero of=/mnt/tmpfile bs=1M count=4096
sync

is over 3.7x faster.

Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: powerpc - move files to fix build error

The current cryptodev-2.6 tree commits:

d9850fc529ef ("crypto: powerpc/sha1 - kernel config")
50ba29aaa7b0 ("crypto: powerpc/sha1 - glue")

failed to

crypto: powerpc - move files to fix build error

The current cryptodev-2.6 tree commits:

d9850fc529ef ("crypto: powerpc/sha1 - kernel config")
50ba29aaa7b0 ("crypto: powerpc/sha1 - glue")

failed to properly place files under arch/powerpc/crypto, which
leads to build errors:

make[1]: *** No rule to make target 'arch/powerpc/crypto/sha1-spe-asm.o', needed by 'arch/powerpc/crypto/sha1-ppc-spe.o'. Stop.
make[1]: *** No rule to make target 'arch/powerpc/crypto/sha1_spe_glue.o', needed by 'arch/powerpc/crypto/sha1-ppc-spe.o'. Stop.
Makefile:947: recipe for target 'arch/powerpc/crypto' failed

Move the two sha1 spe files under crypto/, and whilst there, rename
other powerpc crypto files with underscores to use dashes for
consistency.

Cc: Markus Stockhausen <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: powerpc/md5 - kernel config

Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]

crypto: powerpc/md5 - kernel config

Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: powerpc/sha1 - kernel config

Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]

crypto: powerpc/sha1 - kernel config

Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: powerpc/aes - kernel config

Integrate the module into the kernel configuration

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]

crypto: powerpc/aes - kernel config

Integrate the module into the kernel configuration

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

crypto: ppc/sha256 - kernel config

Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected].

crypto: ppc/sha256 - kernel config

Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

show more ...

powerpc: Add a powerpc implementation of SHA-1

This patch adds a crypto driver which provides a powerpc accelerated
implementation of SHA-1, accelerated in that it is written in asm.

Original patch

powerpc: Add a powerpc implementation of SHA-1

This patch adds a crypto driver which provides a powerpc accelerated
implementation of SHA-1, accelerated in that it is written in asm.

Original patch by Paul, minor fixups for upstream by moi.

Lightly tested on 64-bit with the test program here:

http://michael.ellerman.id.au/files/junkcode/sha1test.c

Seems to work, and is "not slower" than the generic version.

Needs testing on 32-bit.

Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...